@@ -12,9 +12,9 @@
*
* 1) The main xfer routine kicks off a transmission by putting the start bit
* (or repeated start) on the bus and enabling the transmit interrupt (TIE)
- * since we need to send the slave address + RW bit in every case.
+ * since we need to send the client address + RW bit in every case.
*
- * 2) TIE sends slave address + RW bit and selects how to continue.
+ * 2) TIE sends client address + RW bit and selects how to continue.
*
* 3a) Write case: We keep utilizing TIE as long as we have data to send. If we
* are done, we switch over to the transmission done interrupt (TEIE) and mark
@@ -276,7 +276,7 @@ static u32 riic_func(struct i2c_adapter *adap)
}
static const struct i2c_algorithm riic_algo = {
- .master_xfer = riic_xfer,
+ .xfer = riic_xfer,
.functionality = riic_func,
};
Match the wording of this driver wrt. the newest I2C v7, SMBus 3.2, I3C specifications and replace "master/slave" with more appropriate terms. They are also more specific because we distinguish now between a remote entity ("client") and a local one ("target"). Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> --- drivers/i2c/busses/i2c-riic.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)