@@ -356,8 +356,8 @@ int dsi_link_clk_set_rate_6g(struct msm_dsi_host *msm_host)
{
int ret;
- DBG("Set clk rates: pclk=%d, byteclk=%lu",
- msm_host->mode->clock, msm_host->byte_clk_rate);
+ DBG("Set clk rates: pclk=%lu, byteclk=%lu",
+ msm_host->pixel_clk_rate, msm_host->byte_clk_rate);
ret = dev_pm_opp_set_rate(&msm_host->pdev->dev,
msm_host->byte_clk_rate);
@@ -430,9 +430,9 @@ int dsi_link_clk_set_rate_v2(struct msm_dsi_host *msm_host)
{
int ret;
- DBG("Set clk rates: pclk=%d, byteclk=%lu, esc_clk=%lu, dsi_src_clk=%lu",
- msm_host->mode->clock, msm_host->byte_clk_rate,
- msm_host->esc_clk_rate, msm_host->src_clk_rate);
+ DBG("Set clk rates: pclk=%lu, byteclk=%lu, esc_clk=%lu, dsi_src_clk=%lu",
+ msm_host->pixel_clk_rate, msm_host->byte_clk_rate,
+ msm_host->esc_clk_rate, msm_host->src_clk_rate);
ret = clk_set_rate(msm_host->byte_clk, msm_host->byte_clk_rate);
if (ret) {
When dual-DSI (bonded DSI) was added in commit ed9976a09b48 ("drm/msm/dsi: adjust dsi timing for dual dsi mode") some DBG() prints were not updated, leading to print the original mode->clock rather than the adjusted (typically the mode clock divided by two, though more recently also adjusted for DSC compression) msm_host->pixel_clk_rate which is passed to clk_set_rate() just below. Fix that by printing the actual pixel_clk_rate that is being set. Fixes: ed9976a09b48 ("drm/msm/dsi: adjust dsi timing for dual dsi mode") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> --- drivers/gpu/drm/msm/dsi/dsi_host.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)