@@ -1150,6 +1150,9 @@ drv_pre_channel_switch(struct ieee80211_sub_if_data *sdata,
if (!check_sdata_in_driver(sdata))
return -EIO;
+ if (!ieee80211_vif_link_active(&sdata->vif, ch_switch->link_id))
+ return 0;
+
trace_drv_pre_channel_switch(local, sdata, ch_switch);
if (local->ops->pre_channel_switch)
ret = local->ops->pre_channel_switch(&local->hw, &sdata->vif,
@@ -1171,6 +1174,9 @@ drv_post_channel_switch(struct ieee80211_link_data *link)
if (!check_sdata_in_driver(sdata))
return -EIO;
+ if (!ieee80211_vif_link_active(&sdata->vif, link->link_id))
+ return 0;
+
trace_drv_post_channel_switch(local, sdata);
if (local->ops->post_channel_switch)
ret = local->ops->post_channel_switch(&local->hw, &sdata->vif,
@@ -1191,6 +1197,9 @@ drv_abort_channel_switch(struct ieee80211_link_data *link)
if (!check_sdata_in_driver(sdata))
return;
+ if (!ieee80211_vif_link_active(&sdata->vif, link->link_id))
+ return;
+
trace_drv_abort_channel_switch(local, sdata);
if (local->ops->abort_channel_switch)
@@ -1210,6 +1219,9 @@ drv_channel_switch_rx_beacon(struct ieee80211_sub_if_data *sdata,
if (!check_sdata_in_driver(sdata))
return;
+ if (!ieee80211_vif_link_active(&sdata->vif, ch_switch->link_id))
+ return;
+
trace_drv_channel_switch_rx_beacon(local, sdata, ch_switch);
if (local->ops->channel_switch_rx_beacon)
local->ops->channel_switch_rx_beacon(&local->hw, &sdata->vif,
@@ -976,6 +976,7 @@ struct ieee80211_link_data_managed {
bool csa_waiting_bcn;
bool csa_ignored_same_chan;
+ unsigned long csa_time;
struct wiphy_delayed_work chswitch_work;
struct wiphy_work request_smps_work;
@@ -359,6 +359,18 @@ static int _ieee80211_set_active_links(struct ieee80211_sub_if_data *sdata,
ieee80211_teardown_tdls_peers(link);
__ieee80211_link_release_channel(link, true);
+
+ /*
+ * If CSA is (still) active while the link is deactivated,
+ * just schedule the channel switch work for the time we
+ * had previously calculated, and we'll take the process
+ * from there.
+ */
+ if (link->conf->csa_active)
+ wiphy_delayed_work_queue(local->hw.wiphy,
+ &link->u.mgd.chswitch_work,
+ link->u.mgd.csa_time -
+ jiffies);
}
list_for_each_entry(sta, &local->sta_list, list) {
@@ -1877,6 +1877,18 @@ static void ieee80211_chswitch_work(struct wiphy *wiphy,
if (!link->conf->csa_active)
return;
+ /*
+ * If the link isn't active (now), we cannot wait for beacons, won't
+ * have a reserved chanctx, etc. Just switch over the chandef and
+ * update cfg80211 directly.
+ */
+ if (!ieee80211_vif_link_active(&sdata->vif, link->link_id)) {
+ link->conf->chanreq = link->csa_chanreq;
+ cfg80211_ch_switch_notify(sdata->dev, &link->csa_chanreq.oper,
+ link->link_id);
+ return;
+ }
+
/*
* using reservation isn't immediate as it may be deferred until later
* with multi-vif. once reservation is complete it will re-schedule the
@@ -1895,9 +1907,9 @@ static void ieee80211_chswitch_work(struct wiphy *wiphy,
ret = ieee80211_link_use_reserved_context(link);
if (ret) {
- sdata_info(sdata,
- "failed to use reserved channel context, disconnecting (err=%d)\n",
- ret);
+ link_info(link,
+ "failed to use reserved channel context, disconnecting (err=%d)\n",
+ ret);
wiphy_work_queue(sdata->local->hw.wiphy,
&ifmgd->csa_connection_drop_work);
}
@@ -1906,8 +1918,8 @@ static void ieee80211_chswitch_work(struct wiphy *wiphy,
if (!ieee80211_chanreq_identical(&link->conf->chanreq,
&link->csa_chanreq)) {
- sdata_info(sdata,
- "failed to finalize channel switch, disconnecting\n");
+ link_info(link,
+ "failed to finalize channel switch, disconnecting\n");
wiphy_work_queue(sdata->local->hw.wiphy,
&ifmgd->csa_connection_drop_work);
return;
@@ -1941,14 +1953,14 @@ static void ieee80211_chswitch_post_beacon(struct ieee80211_link_data *link)
ret = drv_post_channel_switch(link);
if (ret) {
- sdata_info(sdata,
- "driver post channel switch failed, disconnecting\n");
+ link_info(link,
+ "driver post channel switch failed, disconnecting\n");
wiphy_work_queue(sdata->local->hw.wiphy,
&ifmgd->csa_connection_drop_work);
return;
}
- cfg80211_ch_switch_notify(sdata->dev, &link->reserved.oper,
+ cfg80211_ch_switch_notify(sdata->dev, &link->conf->chanreq.oper,
link->link_id);
}
@@ -1963,7 +1975,8 @@ void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success,
if (!success) {
sdata_info(sdata,
- "driver channel switch failed, disconnecting\n");
+ "driver channel switch failed (link %d), disconnecting\n",
+ link_id);
wiphy_work_queue(sdata->local->hw.wiphy,
&sdata->u.mgd.csa_connection_drop_work);
} else {
@@ -2007,69 +2020,221 @@ ieee80211_sta_abort_chanswitch(struct ieee80211_link_data *link)
drv_abort_channel_switch(link);
}
+struct sta_csa_rnr_iter_data {
+ struct ieee80211_link_data *link;
+ struct ieee80211_channel *chan;
+ u8 mld_id;
+};
+
+static enum cfg80211_rnr_iter_ret
+ieee80211_sta_csa_rnr_iter(void *_data, u8 type,
+ const struct ieee80211_neighbor_ap_info *info,
+ const u8 *tbtt_info, u8 tbtt_info_len)
+{
+ struct sta_csa_rnr_iter_data *data = _data;
+ struct ieee80211_link_data *link = data->link;
+ struct ieee80211_sub_if_data *sdata = link->sdata;
+ struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+ const struct ieee80211_tbtt_info_ge_11 *ti;
+ enum nl80211_band band;
+ unsigned int center_freq;
+ int link_id;
+
+ if (type != IEEE80211_TBTT_INFO_TYPE_TBTT)
+ return RNR_ITER_CONTINUE;
+
+ if (tbtt_info_len < sizeof(*ti))
+ return RNR_ITER_CONTINUE;
+
+ ti = (const void *)tbtt_info;
+
+ if (ti->mld_params.mld_id != data->mld_id)
+ return RNR_ITER_CONTINUE;
+
+ link_id = le16_get_bits(ti->mld_params.params,
+ IEEE80211_RNR_MLD_PARAMS_LINK_ID);
+ if (link_id != data->link->link_id)
+ return RNR_ITER_CONTINUE;
+
+ /* we found the entry for our link! */
+
+ /* this AP is confused, it had this right before ... just disconnect */
+ if (!ieee80211_operating_class_to_band(info->op_class, &band)) {
+ link_info(link,
+ "AP now has invalid operating class in RNR, disconnect\n");
+ wiphy_work_queue(sdata->local->hw.wiphy,
+ &ifmgd->csa_connection_drop_work);
+ return RNR_ITER_BREAK;
+ }
+
+ center_freq = ieee80211_channel_to_frequency(info->channel, band);
+ data->chan = ieee80211_get_channel(sdata->local->hw.wiphy, center_freq);
+
+ return RNR_ITER_BREAK;
+}
+
+static void
+ieee80211_sta_other_link_csa_disappeared(struct ieee80211_link_data *link,
+ struct ieee802_11_elems *elems)
+{
+ struct ieee80211_sub_if_data *sdata = link->sdata;
+ struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+ struct sta_csa_rnr_iter_data data = {
+ .link = link,
+ };
+
+ /*
+ * If we get here, we see a beacon from another link without
+ * CSA still being reported for it, so now we have to check
+ * if the CSA was aborted or completed. This may not even be
+ * perfectly possible if the CSA was only done for changing
+ * the puncturing, but in that case if the link in inactive
+ * we don't really care, and if it's an active link (or when
+ * it's activated later) we'll get a beacon and adjust.
+ */
+
+ if (WARN_ON(!elems->ml_basic))
+ return;
+
+ data.mld_id = ieee80211_mle_get_mld_id((const void *)elems->ml_basic);
+
+ /*
+ * So in order to do this, iterate the RNR element(s) and see
+ * what channel is reported now.
+ */
+ cfg80211_iter_rnr(elems->ie_start, elems->total_len,
+ ieee80211_sta_csa_rnr_iter, &data);
+
+ if (!data.chan) {
+ link_info(link,
+ "couldn't find (valid) channel in RNR for CSA, disconnect\n");
+ wiphy_work_queue(sdata->local->hw.wiphy,
+ &ifmgd->csa_connection_drop_work);
+ return;
+ }
+
+ /*
+ * If it doesn't match the CSA, then assume it aborted. This
+ * may erroneously detect that it was _not_ aborted when it
+ * was in fact aborted, but only changed the bandwidth or the
+ * puncturing configuration, but we don't have enough data to
+ * detect that.
+ */
+ if (data.chan != link->csa_chanreq.oper.chan)
+ ieee80211_sta_abort_chanswitch(link);
+}
+
+enum ieee80211_csa_source {
+ IEEE80211_CSA_SOURCE_BEACON,
+ IEEE80211_CSA_SOURCE_OTHER_LINK,
+ IEEE80211_CSA_SOURCE_ACTION,
+};
+
static void
ieee80211_sta_process_chanswitch(struct ieee80211_link_data *link,
u64 timestamp, u32 device_timestamp,
- struct ieee802_11_elems *elems,
- bool beacon)
+ struct ieee802_11_elems *full_elems,
+ struct ieee802_11_elems *csa_elems,
+ enum ieee80211_csa_source source)
{
struct ieee80211_sub_if_data *sdata = link->sdata;
struct ieee80211_local *local = sdata->local;
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
- struct cfg80211_bss *cbss = link->conf->bss;
+ struct ieee80211_chanctx *chanctx = NULL;
struct ieee80211_chanctx_conf *conf;
- struct ieee80211_chanctx *chanctx;
- enum nl80211_band current_band;
- struct ieee80211_csa_ie csa_ie;
+ struct ieee80211_csa_ie csa_ie = {};
struct ieee80211_channel_switch ch_switch = {
.link_id = link->link_id,
+ .timestamp = timestamp,
+ .device_timestamp = device_timestamp,
};
- struct ieee80211_bss *bss;
- unsigned long timeout;
+ unsigned long now;
int res;
lockdep_assert_wiphy(local->hw.wiphy);
- if (!cbss)
- return;
+ if (csa_elems) {
+ struct cfg80211_bss *cbss = link->conf->bss;
+ enum nl80211_band current_band;
+ struct ieee80211_bss *bss;
- current_band = cbss->channel->band;
- bss = (void *)cbss->priv;
- res = ieee80211_parse_ch_switch_ie(sdata, elems, current_band,
- bss->vht_cap_info,
- &link->u.mgd.conn,
- link->u.mgd.bssid, &csa_ie);
+ if (WARN_ON(!cbss))
+ return;
- if (!res) {
- ch_switch.timestamp = timestamp;
- ch_switch.device_timestamp = device_timestamp;
- ch_switch.block_tx = csa_ie.mode;
- ch_switch.chandef = csa_ie.chanreq.oper;
- ch_switch.count = csa_ie.count;
- ch_switch.delay = csa_ie.max_switch_time;
+ current_band = cbss->channel->band;
+ bss = (void *)cbss->priv;
+
+ res = ieee80211_parse_ch_switch_ie(sdata, csa_elems,
+ current_band,
+ bss->vht_cap_info,
+ &link->u.mgd.conn,
+ link->u.mgd.bssid, &csa_ie);
+ if (res == 0) {
+ ch_switch.block_tx = csa_ie.mode;
+ ch_switch.chandef = csa_ie.chanreq.oper;
+ ch_switch.count = csa_ie.count;
+ ch_switch.delay = csa_ie.max_switch_time;
+ }
+ } else {
+ /*
+ * If there was no per-STA profile for this link, we
+ * get called with csa_elems == NULL. This of course means
+ * there are no CSA elements, so set res=1 indicating
+ * no more CSA.
+ */
+ res = 1;
}
if (res < 0)
goto drop_connection;
if (link->conf->csa_active) {
- /* already processing - disregard action frames */
- if (!beacon)
+ switch (source) {
+ case IEEE80211_CSA_SOURCE_ACTION:
+ /* already processing - disregard action frames */
return;
+ case IEEE80211_CSA_SOURCE_BEACON:
+ if (link->u.mgd.csa_waiting_bcn) {
+ ieee80211_chswitch_post_beacon(link);
+ /*
+ * If the CSA is still present after the switch
+ * we need to consider it as a new CSA (possibly
+ * to self). This happens by not returning here
+ * so we'll get to the check below.
+ */
+ } else if (res) {
+ ieee80211_sta_abort_chanswitch(link);
+ return;
+ } else {
+ drv_channel_switch_rx_beacon(sdata, &ch_switch);
+ return;
+ }
+ break;
+ case IEEE80211_CSA_SOURCE_OTHER_LINK:
+ /* active link: we want to see the beacon to continue */
+ if (ieee80211_vif_link_active(&sdata->vif,
+ link->link_id))
+ return;
- if (link->u.mgd.csa_waiting_bcn) {
- ieee80211_chswitch_post_beacon(link);
- /*
- * If the CSA IE is still present in the beacon after
- * the switch, we need to consider it as a new CSA
- * (possibly to self) - this happens by not returning
- * here so we'll get to the check below.
- */
- } else if (res) {
- ieee80211_sta_abort_chanswitch(link);
- return;
- } else {
- drv_channel_switch_rx_beacon(sdata, &ch_switch);
+ /* switch work ran, so just complete the process */
+ if (link->u.mgd.csa_waiting_bcn) {
+ ieee80211_chswitch_post_beacon(link);
+ /*
+ * If the CSA is still present after the switch
+ * we need to consider it as a new CSA (possibly
+ * to self). This happens by not returning here
+ * so we'll get to the check below.
+ */
+ break;
+ }
+
+ /* link still has CSA but we already know, do nothing */
+ if (!res)
+ return;
+
+ /* check in the RNR if the CSA aborted */
+ ieee80211_sta_other_link_csa_disappeared(link,
+ full_elems);
return;
}
}
@@ -2080,40 +2245,38 @@ ieee80211_sta_process_chanswitch(struct ieee80211_link_data *link,
if (link->conf->chanreq.oper.chan->band !=
csa_ie.chanreq.oper.chan->band) {
- sdata_info(sdata,
- "AP %pM switches to different band (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n",
- link->u.mgd.bssid,
- csa_ie.chanreq.oper.chan->center_freq,
- csa_ie.chanreq.oper.width,
- csa_ie.chanreq.oper.center_freq1,
- csa_ie.chanreq.oper.center_freq2);
+ link_info(link,
+ "AP %pM switches to different band (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n",
+ link->u.mgd.bssid,
+ csa_ie.chanreq.oper.chan->center_freq,
+ csa_ie.chanreq.oper.width,
+ csa_ie.chanreq.oper.center_freq1,
+ csa_ie.chanreq.oper.center_freq2);
goto drop_connection;
}
if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chanreq.oper,
IEEE80211_CHAN_DISABLED)) {
- sdata_info(sdata,
- "AP %pM switches to unsupported channel "
- "(%d.%03d MHz, width:%d, CF1/2: %d.%03d/%d MHz), "
- "disconnecting\n",
- link->u.mgd.bssid,
- csa_ie.chanreq.oper.chan->center_freq,
- csa_ie.chanreq.oper.chan->freq_offset,
- csa_ie.chanreq.oper.width,
- csa_ie.chanreq.oper.center_freq1,
- csa_ie.chanreq.oper.freq1_offset,
- csa_ie.chanreq.oper.center_freq2);
+ link_info(link,
+ "AP %pM switches to unsupported channel (%d.%03d MHz, width:%d, CF1/2: %d.%03d/%d MHz), disconnecting\n",
+ link->u.mgd.bssid,
+ csa_ie.chanreq.oper.chan->center_freq,
+ csa_ie.chanreq.oper.chan->freq_offset,
+ csa_ie.chanreq.oper.width,
+ csa_ie.chanreq.oper.center_freq1,
+ csa_ie.chanreq.oper.freq1_offset,
+ csa_ie.chanreq.oper.center_freq2);
goto drop_connection;
}
if (cfg80211_chandef_identical(&csa_ie.chanreq.oper,
&link->conf->chanreq.oper) &&
- (!csa_ie.mode || !beacon)) {
+ (!csa_ie.mode || source != IEEE80211_CSA_SOURCE_BEACON)) {
if (link->u.mgd.csa_ignored_same_chan)
return;
- sdata_info(sdata,
- "AP %pM tries to chanswitch to same channel, ignore\n",
- link->u.mgd.bssid);
+ link_info(link,
+ "AP %pM tries to chanswitch to same channel, ignore\n",
+ link->u.mgd.bssid);
link->u.mgd.csa_ignored_same_chan = true;
return;
}
@@ -2129,33 +2292,36 @@ ieee80211_sta_process_chanswitch(struct ieee80211_link_data *link,
conf = rcu_dereference_protected(link->conf->chanctx_conf,
lockdep_is_held(&local->hw.wiphy->mtx));
- if (!conf) {
- sdata_info(sdata,
- "no channel context assigned to vif?, disconnecting\n");
+ if (ieee80211_vif_link_active(&sdata->vif, link->link_id) && !conf) {
+ link_info(link,
+ "no channel context assigned to vif?, disconnecting\n");
goto drop_connection;
}
- chanctx = container_of(conf, struct ieee80211_chanctx, conf);
+ if (conf)
+ chanctx = container_of(conf, struct ieee80211_chanctx, conf);
if (!ieee80211_hw_check(&local->hw, CHANCTX_STA_CSA)) {
- sdata_info(sdata,
- "driver doesn't support chan-switch with channel contexts\n");
+ link_info(link,
+ "driver doesn't support chan-switch with channel contexts\n");
goto drop_connection;
}
if (drv_pre_channel_switch(sdata, &ch_switch)) {
- sdata_info(sdata,
- "preparing for channel switch failed, disconnecting\n");
+ link_info(link,
+ "preparing for channel switch failed, disconnecting\n");
goto drop_connection;
}
- res = ieee80211_link_reserve_chanctx(link, &csa_ie.chanreq,
- chanctx->mode, false);
- if (res) {
- sdata_info(sdata,
- "failed to reserve channel context for channel switch, disconnecting (err=%d)\n",
- res);
- goto drop_connection;
+ if (chanctx) {
+ res = ieee80211_link_reserve_chanctx(link, &csa_ie.chanreq,
+ chanctx->mode, false);
+ if (res) {
+ link_info(link,
+ "failed to reserve channel context for channel switch, disconnecting (err=%d)\n",
+ res);
+ goto drop_connection;
+ }
}
link->conf->csa_active = true;
@@ -2174,18 +2340,28 @@ ieee80211_sta_process_chanswitch(struct ieee80211_link_data *link,
link->link_id, csa_ie.count,
csa_ie.mode);
- if (local->ops->channel_switch) {
- /* use driver's channel switch callback */
+ /* we may have to handle timeout for deactivated link in software */
+ now = jiffies;
+ link->u.mgd.csa_time = now +
+ TU_TO_JIFFIES((max_t(int, csa_ie.count, 1) - 1) *
+ link->conf->beacon_int);
+
+ if (ieee80211_vif_link_active(&sdata->vif, link->link_id) &&
+ local->ops->channel_switch) {
+ /*
+ * Use driver's channel switch callback, the driver will
+ * later call ieee80211_chswitch_done(). It may deactivate
+ * the link as well, we handle that elsewhere and queue
+ * the chswitch_work for the calculated time then.
+ */
drv_channel_switch(local, sdata, &ch_switch);
return;
}
/* channel switch handled in software */
- timeout = TU_TO_JIFFIES((max_t(int, csa_ie.count, 1) - 1) *
- cbss->beacon_interval);
wiphy_delayed_work_queue(local->hw.wiphy,
&link->u.mgd.chswitch_work,
- timeout);
+ link->u.mgd.csa_time - now);
return;
drop_connection:
/*
@@ -6121,6 +6297,110 @@ static void ieee80211_process_adv_ttlm(struct ieee80211_sub_if_data *sdata,
}
}
+static void
+ieee80211_mgd_check_cross_link_csa(struct ieee80211_sub_if_data *sdata,
+ int reporting_link_id,
+ struct ieee802_11_elems *elems)
+{
+ const struct element *sta_profiles[IEEE80211_MLD_MAX_NUM_LINKS] = {};
+ ssize_t sta_profiles_len[IEEE80211_MLD_MAX_NUM_LINKS] = {};
+ const struct element *sub;
+ const u8 *subelems;
+ size_t subelems_len;
+ u8 common_size;
+ int link_id;
+
+ if (!ieee80211_mle_size_ok((u8 *)elems->ml_basic, elems->ml_basic_len))
+ return;
+
+ common_size = ieee80211_mle_common_size((u8 *)elems->ml_basic);
+ subelems = (u8 *)elems->ml_basic + common_size;
+ subelems_len = elems->ml_basic_len - common_size;
+
+ for_each_element_id(sub, IEEE80211_MLE_SUBELEM_PER_STA_PROFILE,
+ subelems, subelems_len) {
+ struct ieee80211_mle_per_sta_profile *prof = (void *)sub->data;
+ struct ieee80211_link_data *link;
+ ssize_t len;
+
+ if (!ieee80211_mle_basic_sta_prof_size_ok(sub->data,
+ sub->datalen))
+ continue;
+
+ link_id = le16_get_bits(prof->control,
+ IEEE80211_MLE_STA_CONTROL_LINK_ID);
+ /* need a valid link ID, but also not our own, both AP bugs */
+ if (link_id == reporting_link_id ||
+ link_id >= IEEE80211_MLD_MAX_NUM_LINKS)
+ continue;
+
+ link = sdata_dereference(sdata->link[link_id], sdata);
+ if (!link)
+ continue;
+
+ len = cfg80211_defragment_element(sub, subelems, subelems_len,
+ NULL, 0,
+ IEEE80211_MLE_SUBELEM_FRAGMENT);
+ if (WARN_ON(len < 0))
+ continue;
+
+ sta_profiles[link_id] = sub;
+ sta_profiles_len[link_id] = len;
+ }
+
+ for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) {
+ struct ieee80211_mle_per_sta_profile *prof;
+ struct ieee802_11_elems *prof_elems;
+ struct ieee80211_link_data *link;
+ ssize_t len;
+
+ if (link_id == reporting_link_id)
+ continue;
+
+ link = sdata_dereference(sdata->link[link_id], sdata);
+ if (!link)
+ continue;
+
+ if (!sta_profiles[link_id]) {
+ prof_elems = NULL;
+ goto handle;
+ }
+
+ /* we can defragment in-place, won't use the buffer again */
+ len = cfg80211_defragment_element(sta_profiles[link_id],
+ subelems, subelems_len,
+ (void *)sta_profiles[link_id],
+ sta_profiles_len[link_id],
+ IEEE80211_MLE_SUBELEM_FRAGMENT);
+ if (WARN_ON(len != sta_profiles_len[link_id]))
+ continue;
+
+ prof = (void *)sta_profiles[link_id];
+ prof_elems = ieee802_11_parse_elems(prof->variable +
+ (prof->sta_info_len - 1),
+ len -
+ (prof->sta_info_len - 1),
+ false, NULL);
+
+ /* memory allocation failed - let's hope that's transient */
+ if (!prof_elems)
+ continue;
+
+handle:
+ /*
+ * FIXME: the timings here are obviously incorrect,
+ * but only older Intel drivers seem to care, and
+ * those don't have MLO. If you really need this,
+ * the problem is having to calculate it with the
+ * TSF offset etc. The device_timestamp is still
+ * correct, of course.
+ */
+ ieee80211_sta_process_chanswitch(link, 0, 0, elems, prof_elems,
+ IEEE80211_CSA_SOURCE_OTHER_LINK);
+ kfree(prof_elems);
+ }
+}
+
static void ieee80211_rx_mgmt_beacon(struct ieee80211_link_data *link,
struct ieee80211_hdr *hdr, size_t len,
struct ieee80211_rx_status *rx_status)
@@ -6344,7 +6624,11 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_link_data *link,
ieee80211_sta_process_chanswitch(link, rx_status->mactime,
rx_status->device_timestamp,
- elems, true);
+ elems, elems,
+ IEEE80211_CSA_SOURCE_BEACON);
+
+ /* note that after this elems->ml_basic can no longer be used fully */
+ ieee80211_mgd_check_cross_link_csa(sdata, rx_status->link_id, elems);
if (!link->u.mgd.disable_wmm_tracking &&
ieee80211_sta_wmm_params(local, link, elems->wmm_param,
@@ -6940,7 +7224,8 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
ieee80211_sta_process_chanswitch(link,
rx_status->mactime,
rx_status->device_timestamp,
- elems, false);
+ elems, elems,
+ IEEE80211_CSA_SOURCE_ACTION);
kfree(elems);
} else if (mgmt->u.action.category == WLAN_CATEGORY_PUBLIC) {
struct ieee802_11_elems *elems;
@@ -6968,7 +7253,8 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
ieee80211_sta_process_chanswitch(link,
rx_status->mactime,
rx_status->device_timestamp,
- elems, false);
+ elems, elems,
+ IEEE80211_CSA_SOURCE_ACTION);
}
kfree(elems);