diff mbox series

pinctrl: qcom: pinctrl-sm7150: Fix sdc1 and ufs special pins regs

Message ID 20240423203245.188480-1-danila@jiaxyga.com
State New
Headers show
Series pinctrl: qcom: pinctrl-sm7150: Fix sdc1 and ufs special pins regs | expand

Commit Message

Danila Tikhonov April 23, 2024, 8:32 p.m. UTC 
SDC1 and UFS_RESET special pins are located in the west memory bank.

SDC1 have address 0x359a000:
0x3500000 (TLMM BASE) + 0x0 (WEST) + 0x9a000 (SDC1_OFFSET) = 0x359a000

UFS_RESET have address 0x359f000:
0x3500000 (TLMM BASE) + 0x0 (WEST) + 0x9f000 (UFS_OFFSET) = 0x359a000

Fixes: b915395c9e04 ("pinctrl: qcom: Add SM7150 pinctrl driver")
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
---
 drivers/pinctrl/qcom/pinctrl-sm7150.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

Comments

Linus Walleij May 3, 2024, 7:55 a.m. UTC | #1 
On Tue, Apr 23, 2024 at 10:33 PM Danila Tikhonov <danila@jiaxyga.com> wrote:

> SDC1 and UFS_RESET special pins are located in the west memory bank.
>
> SDC1 have address 0x359a000:
> 0x3500000 (TLMM BASE) + 0x0 (WEST) + 0x9a000 (SDC1_OFFSET) = 0x359a000
>
> UFS_RESET have address 0x359f000:
> 0x3500000 (TLMM BASE) + 0x0 (WEST) + 0x9f000 (UFS_OFFSET) = 0x359a000
>
> Fixes: b915395c9e04 ("pinctrl: qcom: Add SM7150 pinctrl driver")
> Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>

Patch applied as nonurgent as I assume there are no current
users that can be regressed.

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/drivers/pinctrl/qcom/pinctrl-sm7150.c b/drivers/pinctrl/qcom/pinctrl-sm7150.c
index c542f9bc6bcd..095a1ca75849 100644
--- a/drivers/pinctrl/qcom/pinctrl-sm7150.c
+++ b/drivers/pinctrl/qcom/pinctrl-sm7150.c
@@ -65,7 +65,7 @@  enum {
 		.intr_detection_width = 2,		\
 	}
 
-#define SDC_QDSD_PINGROUP(pg_name, ctl, pull, drv)	\
+#define SDC_QDSD_PINGROUP(pg_name, _tile, ctl, pull, drv) \
 	{						\
 		.grp = PINCTRL_PINGROUP(#pg_name, 	\
 			pg_name##_pins, 		\
@@ -75,7 +75,7 @@  enum {
 		.intr_cfg_reg = 0,			\
 		.intr_status_reg = 0,			\
 		.intr_target_reg = 0,			\
-		.tile = SOUTH,				\
+		.tile = _tile,				\
 		.mux_bit = -1,				\
 		.pull_bit = pull,			\
 		.drv_bit = drv,				\
@@ -101,7 +101,7 @@  enum {
 		.intr_cfg_reg = 0,			\
 		.intr_status_reg = 0,			\
 		.intr_target_reg = 0,			\
-		.tile = SOUTH,				\
+		.tile = WEST,				\
 		.mux_bit = -1,				\
 		.pull_bit = 3,				\
 		.drv_bit = 0,				\
@@ -1199,13 +1199,13 @@  static const struct msm_pingroup sm7150_groups[] = {
 	[117] = PINGROUP(117, NORTH, _, _, _, _, _, _, _, _, _),
 	[118] = PINGROUP(118, NORTH, _, _, _, _, _, _, _, _, _),
 	[119] = UFS_RESET(ufs_reset, 0x9f000),
-	[120] = SDC_QDSD_PINGROUP(sdc1_rclk, 0x9a000, 15, 0),
-	[121] = SDC_QDSD_PINGROUP(sdc1_clk, 0x9a000, 13, 6),
-	[122] = SDC_QDSD_PINGROUP(sdc1_cmd, 0x9a000, 11, 3),
-	[123] = SDC_QDSD_PINGROUP(sdc1_data, 0x9a000, 9, 0),
-	[124] = SDC_QDSD_PINGROUP(sdc2_clk, 0x98000, 14, 6),
-	[125] = SDC_QDSD_PINGROUP(sdc2_cmd, 0x98000, 11, 3),
-	[126] = SDC_QDSD_PINGROUP(sdc2_data, 0x98000, 9, 0),
+	[120] = SDC_QDSD_PINGROUP(sdc1_rclk, WEST, 0x9a000, 15, 0),
+	[121] = SDC_QDSD_PINGROUP(sdc1_clk, WEST, 0x9a000, 13, 6),
+	[122] = SDC_QDSD_PINGROUP(sdc1_cmd, WEST, 0x9a000, 11, 3),
+	[123] = SDC_QDSD_PINGROUP(sdc1_data, WEST, 0x9a000, 9, 0),
+	[124] = SDC_QDSD_PINGROUP(sdc2_clk, SOUTH, 0x98000, 14, 6),
+	[125] = SDC_QDSD_PINGROUP(sdc2_cmd, SOUTH, 0x98000, 11, 3),
+	[126] = SDC_QDSD_PINGROUP(sdc2_data, SOUTH, 0x98000, 9, 0),
 };
 
 static const struct msm_gpio_wakeirq_map sm7150_pdc_map[] = {