diff mbox series

[3/3] spi: sc18is602: add support for SC18IS606

Message ID 20240423-sc18is606-v1-3-094ef37d5a59@bang-olufsen.dk
State New
Headers show
Series spi: sc18is602: add support for SC18IS606 | expand

Commit Message

Alvin Šipraga April 23, 2024, 11:35 a.m. UTC 
From: Alvin Šipraga <alsi@bang-olufsen.dk>

Per its datasheet, the SC18IS606 is a functional replacement of the
currently supported SC18IS602B, with the only relevant exceptions to
this driver being an increased data buffer size (1024 vs 200 bytes) and
three (rather than four) chip selects. It also lacks support for
quasi-directional GPIO, but the driver does not use this feature anyway,
so this is not reflected in the changes.

To that end, update the driver to support variable data buffer sizes and
add populate the relevant driver private data fields for this new chip.

Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
---
 drivers/spi/spi-sc18is602.c | 29 +++++++++++++++++++++++------
 1 file changed, 23 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-sc18is602.c b/drivers/spi/spi-sc18is602.c
index eecf9ea95ae3..c4adfd4af804 100644
--- a/drivers/spi/spi-sc18is602.c
+++ b/drivers/spi/spi-sc18is602.c
@@ -16,9 +16,9 @@ 
 #include <linux/platform_data/sc18is602.h>
 #include <linux/gpio/consumer.h>
 
-enum chips { sc18is602, sc18is602b, sc18is603 };
+enum chips { sc18is602, sc18is602b, sc18is603, sc18is606 };
 
-#define SC18IS602_BUFSIZ		200
+#define SC18IS602_MAX_BUFSIZ		1024
 #define SC18IS602_CLOCK			7372000
 
 #define SC18IS602_MODE_CPHA		BIT(2)
@@ -35,11 +35,12 @@  struct sc18is602 {
 	u8			ctrl;
 	u32			freq;
 	u32			speed;
+	size_t			bufsiz; /* Data buffer size */
 
 	/* I2C data */
 	struct i2c_client	*client;
 	enum chips		id;
-	u8			buffer[SC18IS602_BUFSIZ + 1];
+	u8			buffer[SC18IS602_MAX_BUFSIZ + 1];
 	int			tlen;	/* Data queued for tx in buffer */
 	int			rindex;	/* Receive data index in buffer */
 
@@ -99,7 +100,7 @@  static int sc18is602_txrx(struct sc18is602 *hw, struct spi_message *msg,
 	}
 
 	if (do_transfer && hw->tlen > 1) {
-		ret = sc18is602_wait_ready(hw, SC18IS602_BUFSIZ);
+		ret = sc18is602_wait_ready(hw, hw->bufsiz);
 		if (ret < 0)
 			return ret;
 		ret = i2c_master_send(hw->client, hw->buffer, hw->tlen);
@@ -173,7 +174,9 @@  static int sc18is602_setup_transfer(struct sc18is602 *hw, u32 hz, u8 mode)
 static int sc18is602_check_transfer(struct spi_device *spi,
 				    struct spi_transfer *t, int tlen)
 {
-	if (t && t->len + tlen > SC18IS602_BUFSIZ + 1)
+	struct sc18is602 *hw = spi_controller_get_devdata(spi->controller);
+
+	if (t && t->len + tlen > hw->bufsiz + 1)
 		return -EINVAL;
 
 	return 0;
@@ -220,7 +223,9 @@  static int sc18is602_transfer_one(struct spi_controller *host,
 
 static size_t sc18is602_max_transfer_size(struct spi_device *spi)
 {
-	return SC18IS602_BUFSIZ;
+	struct sc18is602 *hw = spi_controller_get_devdata(spi->controller);
+
+	return hw->bufsiz;
 }
 
 static int sc18is602_setup(struct spi_device *spi)
@@ -274,10 +279,12 @@  static int sc18is602_probe(struct i2c_client *client)
 	case sc18is602:
 	case sc18is602b:
 		host->num_chipselect = 4;
+		hw->bufsiz = 200;
 		hw->freq = SC18IS602_CLOCK;
 		break;
 	case sc18is603:
 		host->num_chipselect = 2;
+		hw->bufsiz = 200;
 		if (pdata) {
 			hw->freq = pdata->clock_frequency;
 		} else {
@@ -291,6 +298,11 @@  static int sc18is602_probe(struct i2c_client *client)
 		if (!hw->freq)
 			hw->freq = SC18IS602_CLOCK;
 		break;
+	case sc18is606:
+		host->num_chipselect = 3;
+		hw->bufsiz = 1024;
+		hw->freq = SC18IS602_CLOCK;
+		break;
 	}
 	host->bus_num = np ? -1 : client->adapter->nr;
 	host->mode_bits = SPI_CPHA | SPI_CPOL | SPI_LSB_FIRST;
@@ -310,6 +322,7 @@  static const struct i2c_device_id sc18is602_id[] = {
 	{ "sc18is602", sc18is602 },
 	{ "sc18is602b", sc18is602b },
 	{ "sc18is603", sc18is603 },
+	{ "sc18is606", sc18is606 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, sc18is602_id);
@@ -327,6 +340,10 @@  static const struct of_device_id sc18is602_of_match[] __maybe_unused = {
 		.compatible = "nxp,sc18is603",
 		.data = (void *)sc18is603
 	},
+	{
+		.compatible = "nxp,sc18is606",
+		.data = (void *)sc18is606
+	},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, sc18is602_of_match);