@@ -13,6 +13,7 @@
* Hans de Goede <hdegoede@redhat.com>
*/
+#include <linux/bits.h>
#include <linux/gpio/consumer.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
@@ -46,6 +47,11 @@ struct ektf2127_ts {
struct input_dev *input;
struct gpio_desc *power_gpios;
struct touchscreen_properties prop;
+ int status_shift;
+};
+
+struct ektf2127_i2c_chip_data {
+ int status_shift;
};
static void ektf2127_parse_coordinates(const u8 *buf, unsigned int touch_count,
@@ -112,8 +118,8 @@ static void ektf2127_report2_contact(struct ektf2127_ts *ts, int slot,
static void ektf2127_report2_event(struct ektf2127_ts *ts, const u8 *buf)
{
- ektf2127_report2_contact(ts, 0, &buf[1], !!(buf[7] & 2));
- ektf2127_report2_contact(ts, 1, &buf[4], !!(buf[7] & 4));
+ ektf2127_report2_contact(ts, 0, &buf[1], !!(buf[7] & BIT(ts->status_shift)));
+ ektf2127_report2_contact(ts, 1, &buf[4], !!(buf[7] & BIT(ts->status_shift + 1)));
input_mt_sync_frame(ts->input);
input_sync(ts->input);
@@ -247,6 +253,7 @@ static int ektf2127_query_dimension(struct i2c_client *client, bool width)
static int ektf2127_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
+ const struct ektf2127_i2c_chip_data *chip_data;
struct ektf2127_ts *ts;
struct input_dev *input;
u8 buf[4];
@@ -303,6 +310,13 @@ static int ektf2127_probe(struct i2c_client *client)
return error;
ts->input = input;
+
+ chip_data = i2c_get_match_data(client);
+ if (!chip_data)
+ return dev_err_probe(&client->dev, -EINVAL, "missing chip data\n");
+
+ ts->status_shift = chip_data->status_shift;
+
input_set_drvdata(input, ts);
error = devm_request_threaded_irq(dev, client->irq,
@@ -325,18 +339,28 @@ static int ektf2127_probe(struct i2c_client *client)
return 0;
}
+static const struct ektf2127_i2c_chip_data ektf2127_data = {
+ .status_shift = 1,
+};
+
+static const struct ektf2127_i2c_chip_data ektf2232_data = {
+ .status_shift = 0,
+};
+
#ifdef CONFIG_OF
static const struct of_device_id ektf2127_of_match[] = {
- { .compatible = "elan,ektf2127" },
- { .compatible = "elan,ektf2132" },
+ { .compatible = "elan,ektf2127", .data = &ektf2127_data},
+ { .compatible = "elan,ektf2132", .data = &ektf2127_data},
+ { .compatible = "elan,ektf2232", .data = &ektf2232_data},
{}
};
MODULE_DEVICE_TABLE(of, ektf2127_of_match);
#endif
static const struct i2c_device_id ektf2127_i2c_id[] = {
- { "ektf2127", 0 },
- { "ektf2132", 0 },
+ { .name = "ektf2127", .driver_data = (long)&ektf2127_data },
+ { .name = "ektf2132", .driver_data = (long)&ektf2127_data },
+ { .name = "ektf2232", .driver_data = (long)&ektf2232_data },
{}
};
MODULE_DEVICE_TABLE(i2c, ektf2127_i2c_id);
The chip is similar, but has status bits at different positions, so use the correct bits. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> --- drivers/input/touchscreen/ektf2127.c | 36 +++++++++++++++++++++++----- 1 file changed, 30 insertions(+), 6 deletions(-)