Message ID | 20240510110405.15115-1-vadim.fedorenko@linux.dev |
---|---|
State | New |
Headers | show |
Series | [v2,net] ptp: ocp: adjust serial port symlink creation | expand |
On 10/05/2024 12:13, Greg Kroah-Hartman wrote: > On Fri, May 10, 2024 at 11:04:05AM +0000, Vadim Fedorenko wrote: >> The commit b286f4e87e32 ("serial: core: Move tty and serdev to be children >> of serial core port device") changed the hierarchy of serial port devices >> and device_find_child_by_name cannot find ttyS* devices because they are >> no longer directly attached. Add some logic to restore symlinks creation >> to the driver for OCP TimeCard. >> >> Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device") >> Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> >> --- >> v2: >> add serial/8250 maintainers >> --- >> drivers/ptp/ptp_ocp.c | 30 +++++++++++++++++++++--------- >> 1 file changed, 21 insertions(+), 9 deletions(-) > > Hi, > > This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him > a patch that has triggered this response. He used to manually respond > to these common problems, but in order to save his sanity (he kept > writing the same thing over and over, yet to different people), I was > created. Hopefully you will not take offence and will fix the problem > in your patch and resubmit it so that it can be accepted into the Linux > kernel tree. > > You are receiving this message because of the following common error(s) > as indicated below: > > - You have marked a patch with a "Fixes:" tag for a commit that is in an > older released kernel, yet you do not have a cc: stable line in the > signed-off-by area at all, which means that the patch will not be > applied to any older kernel releases. To properly fix this, please > follow the documented rules in the > Documentation/process/stable-kernel-rules.rst file for how to resolve > this. > > If you wish to discuss this problem further, or you have questions about > how to resolve this issue, please feel free to respond to this email and > Greg will reply once he has dug out from the pending patches received > from other developers. Hi Greg! Just gentle ping, I'm still looking for better solution for serial device lookup in TimeCard driver. Thanks, Vadim
On Fri, 10 May 2024 11:04:05 +0000 Vadim Fedorenko wrote: > The commit b286f4e87e32 ("serial: core: Move tty and serdev to be children > of serial core port device") changed the hierarchy of serial port devices > and device_find_child_by_name cannot find ttyS* devices because they are > no longer directly attached. Add some logic to restore symlinks creation > to the driver for OCP TimeCard. > > Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device") > Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> > --- > v2: > add serial/8250 maintainers > --- > drivers/ptp/ptp_ocp.c | 30 +++++++++++++++++++++--------- > 1 file changed, 21 insertions(+), 9 deletions(-) > > diff --git a/drivers/ptp/ptp_ocp.c b/drivers/ptp/ptp_ocp.c > index ee2ced88ab34..50b7cb9db3be 100644 > --- a/drivers/ptp/ptp_ocp.c > +++ b/drivers/ptp/ptp_ocp.c > @@ -25,6 +25,8 @@ > #include <linux/crc16.h> > #include <linux/dpll.h> > > +#include "../tty/serial/8250/8250.h" Hi Greg, Jiri, does this look reasonable to you? The cross tree include raises an obvious red flag. Should serial / u8250 provide a more official API? Can we use device_for_each_child() to deal with the extra layer in the hierarchy? > #define PCI_VENDOR_ID_FACEBOOK 0x1d9b > #define PCI_DEVICE_ID_FACEBOOK_TIMECARD 0x0400 > > @@ -4330,11 +4332,9 @@ ptp_ocp_symlink(struct ptp_ocp *bp, struct device *child, const char *link) > } > > static void > -ptp_ocp_link_child(struct ptp_ocp *bp, const char *name, const char *link) > +ptp_ocp_link_child(struct ptp_ocp *bp, struct device *dev, const char *name, const char *link) > { > - struct device *dev, *child; > - > - dev = &bp->pdev->dev; > + struct device *child; > > child = device_find_child_by_name(dev, name); > if (!child) { > @@ -4349,27 +4349,39 @@ ptp_ocp_link_child(struct ptp_ocp *bp, const char *name, const char *link) > static int > ptp_ocp_complete(struct ptp_ocp *bp) > { > + struct device *dev, *port_dev; > + struct uart_8250_port *port; > struct pps_device *pps; > char buf[32]; > > + dev = &bp->pdev->dev; > + > if (bp->gnss_port.line != -1) { > + port = serial8250_get_port(bp->gnss_port.line); > + port_dev = (struct device *)port->port.port_dev; > sprintf(buf, "ttyS%d", bp->gnss_port.line); > - ptp_ocp_link_child(bp, buf, "ttyGNSS"); > + ptp_ocp_link_child(bp, port_dev, buf, "ttyGNSS"); > } > if (bp->gnss2_port.line != -1) { > + port = serial8250_get_port(bp->gnss2_port.line); > + port_dev = (struct device *)port->port.port_dev; > sprintf(buf, "ttyS%d", bp->gnss2_port.line); > - ptp_ocp_link_child(bp, buf, "ttyGNSS2"); > + ptp_ocp_link_child(bp, port_dev, buf, "ttyGNSS2"); > } > if (bp->mac_port.line != -1) { > + port = serial8250_get_port(bp->mac_port.line); > + port_dev = (struct device *)port->port.port_dev; > sprintf(buf, "ttyS%d", bp->mac_port.line); > - ptp_ocp_link_child(bp, buf, "ttyMAC"); > + ptp_ocp_link_child(bp, port_dev, buf, "ttyMAC"); > } > if (bp->nmea_port.line != -1) { > + port = serial8250_get_port(bp->nmea_port.line); > + port_dev = (struct device *)port->port.port_dev; > sprintf(buf, "ttyS%d", bp->nmea_port.line); > - ptp_ocp_link_child(bp, buf, "ttyNMEA"); > + ptp_ocp_link_child(bp, port_dev, buf, "ttyNMEA"); > } > sprintf(buf, "ptp%d", ptp_clock_index(bp->ptp)); > - ptp_ocp_link_child(bp, buf, "ptp"); > + ptp_ocp_link_child(bp, dev, buf, "ptp"); > > pps = pps_lookup_dev(bp->ptp); > if (pps)
On Thu, May 23, 2024 at 08:39:43AM -0700, Jakub Kicinski wrote: > On Fri, 10 May 2024 11:04:05 +0000 Vadim Fedorenko wrote: > > The commit b286f4e87e32 ("serial: core: Move tty and serdev to be children > > of serial core port device") changed the hierarchy of serial port devices > > and device_find_child_by_name cannot find ttyS* devices because they are > > no longer directly attached. Add some logic to restore symlinks creation > > to the driver for OCP TimeCard. > > > > Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device") > > Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> > > --- > > v2: > > add serial/8250 maintainers > > --- > > drivers/ptp/ptp_ocp.c | 30 +++++++++++++++++++++--------- > > 1 file changed, 21 insertions(+), 9 deletions(-) > > > > diff --git a/drivers/ptp/ptp_ocp.c b/drivers/ptp/ptp_ocp.c > > index ee2ced88ab34..50b7cb9db3be 100644 > > --- a/drivers/ptp/ptp_ocp.c > > +++ b/drivers/ptp/ptp_ocp.c > > @@ -25,6 +25,8 @@ > > #include <linux/crc16.h> > > #include <linux/dpll.h> > > > > +#include "../tty/serial/8250/8250.h" > > Hi Greg, Jiri, does this look reasonable to you? > The cross tree include raises an obvious red flag. Yeah, that looks wrong. > Should serial / u8250 provide a more official API? If it needs to, but why is this driver poking around in here at all? > Can we use device_for_each_child() to deal with the extra > layer in the hierarchy? Or a real function where needed? > > > #define PCI_VENDOR_ID_FACEBOOK 0x1d9b > > #define PCI_DEVICE_ID_FACEBOOK_TIMECARD 0x0400 > > > > @@ -4330,11 +4332,9 @@ ptp_ocp_symlink(struct ptp_ocp *bp, struct device *child, const char *link) > > } > > > > static void > > -ptp_ocp_link_child(struct ptp_ocp *bp, const char *name, const char *link) > > +ptp_ocp_link_child(struct ptp_ocp *bp, struct device *dev, const char *name, const char *link) > > { > > - struct device *dev, *child; > > - > > - dev = &bp->pdev->dev; > > + struct device *child; > > > > child = device_find_child_by_name(dev, name); > > if (!child) { > > @@ -4349,27 +4349,39 @@ ptp_ocp_link_child(struct ptp_ocp *bp, const char *name, const char *link) > > static int > > ptp_ocp_complete(struct ptp_ocp *bp) > > { > > + struct device *dev, *port_dev; > > + struct uart_8250_port *port; > > struct pps_device *pps; > > char buf[32]; > > > > + dev = &bp->pdev->dev; > > + > > if (bp->gnss_port.line != -1) { > > + port = serial8250_get_port(bp->gnss_port.line); > > + port_dev = (struct device *)port->port.port_dev; That cast is not going to go well. How do you know this is always true? What was the original code attempting to do? It feels like that was wrong to start with if merely moving things around the device tree caused anything to break here. That is not how the driver core is supposed to be used at all. thanks, greg k-h
On 23/05/2024 17:26, Greg Kroah-Hartman wrote: > On Thu, May 23, 2024 at 08:39:43AM -0700, Jakub Kicinski wrote: >> On Fri, 10 May 2024 11:04:05 +0000 Vadim Fedorenko wrote: >>> The commit b286f4e87e32 ("serial: core: Move tty and serdev to be children >>> of serial core port device") changed the hierarchy of serial port devices >>> and device_find_child_by_name cannot find ttyS* devices because they are >>> no longer directly attached. Add some logic to restore symlinks creation >>> to the driver for OCP TimeCard. >>> >>> Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device") >>> Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> >>> --- >>> v2: >>> add serial/8250 maintainers >>> --- >>> drivers/ptp/ptp_ocp.c | 30 +++++++++++++++++++++--------- >>> 1 file changed, 21 insertions(+), 9 deletions(-) >>> >>> diff --git a/drivers/ptp/ptp_ocp.c b/drivers/ptp/ptp_ocp.c >>> index ee2ced88ab34..50b7cb9db3be 100644 >>> --- a/drivers/ptp/ptp_ocp.c >>> +++ b/drivers/ptp/ptp_ocp.c >>> @@ -25,6 +25,8 @@ >>> #include <linux/crc16.h> >>> #include <linux/dpll.h> >>> >>> +#include "../tty/serial/8250/8250.h" >> >> Hi Greg, Jiri, does this look reasonable to you? >> The cross tree include raises an obvious red flag. > > Yeah, that looks wrong. > >> Should serial / u8250 provide a more official API? > > If it needs to, but why is this driver poking around in here at all? Hi Greg! Well, the original idea was to have symlinks with self-explanatory names to real serial devices exposed by PCIe device. > >> Can we use device_for_each_child() to deal with the extra >> layer in the hierarchy? > > Or a real function where needed? yep. > >> >>> #define PCI_VENDOR_ID_FACEBOOK 0x1d9b >>> #define PCI_DEVICE_ID_FACEBOOK_TIMECARD 0x0400 >>> >>> @@ -4330,11 +4332,9 @@ ptp_ocp_symlink(struct ptp_ocp *bp, struct device *child, const char *link) >>> } >>> >>> static void >>> -ptp_ocp_link_child(struct ptp_ocp *bp, const char *name, const char *link) >>> +ptp_ocp_link_child(struct ptp_ocp *bp, struct device *dev, const char *name, const char *link) >>> { >>> - struct device *dev, *child; >>> - >>> - dev = &bp->pdev->dev; >>> + struct device *child; >>> >>> child = device_find_child_by_name(dev, name); >>> if (!child) { >>> @@ -4349,27 +4349,39 @@ ptp_ocp_link_child(struct ptp_ocp *bp, const char *name, const char *link) >>> static int >>> ptp_ocp_complete(struct ptp_ocp *bp) >>> { >>> + struct device *dev, *port_dev; >>> + struct uart_8250_port *port; >>> struct pps_device *pps; >>> char buf[32]; >>> >>> + dev = &bp->pdev->dev; >>> + >>> if (bp->gnss_port.line != -1) { >>> + port = serial8250_get_port(bp->gnss_port.line); >>> + port_dev = (struct device *)port->port.port_dev; > > That cast is not going to go well. How do you know this is always > true? AFAIU, port_dev starts with struct dev always. That's why it's safe. > > What was the original code attempting to do? It feels like that was > wrong to start with if merely moving things around the device tree > caused anything to break here. That is not how the driver core is > supposed to be used at all. > We just want to have a symlink with meaningful name to real tty device, exposed by PCIe device. We provide up to 4 serial ports - GNSS, GNSS2, MAC and NMEA, to user space and we don't want user space to guess which one is which. We do have user space application which relies on symlinks to discover features. We don't use device tree because it's PCIe device with pre-defined functions, so I don't see any other way to get this info and properly create symlinks. Thanks, Vadim > thanks, > > greg k-h
On Thu, May 23, 2024 at 10:06:05PM +0100, Vadim Fedorenko wrote: > On 23/05/2024 17:26, Greg Kroah-Hartman wrote: > > On Thu, May 23, 2024 at 08:39:43AM -0700, Jakub Kicinski wrote: > > > On Fri, 10 May 2024 11:04:05 +0000 Vadim Fedorenko wrote: > > > > The commit b286f4e87e32 ("serial: core: Move tty and serdev to be children > > > > of serial core port device") changed the hierarchy of serial port devices > > > > and device_find_child_by_name cannot find ttyS* devices because they are > > > > no longer directly attached. Add some logic to restore symlinks creation > > > > to the driver for OCP TimeCard. > > > > > > > > Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device") > > > > Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> > > > > --- > > > > v2: > > > > add serial/8250 maintainers > > > > --- > > > > drivers/ptp/ptp_ocp.c | 30 +++++++++++++++++++++--------- > > > > 1 file changed, 21 insertions(+), 9 deletions(-) > > > > > > > > diff --git a/drivers/ptp/ptp_ocp.c b/drivers/ptp/ptp_ocp.c > > > > index ee2ced88ab34..50b7cb9db3be 100644 > > > > --- a/drivers/ptp/ptp_ocp.c > > > > +++ b/drivers/ptp/ptp_ocp.c > > > > @@ -25,6 +25,8 @@ > > > > #include <linux/crc16.h> > > > > #include <linux/dpll.h> > > > > +#include "../tty/serial/8250/8250.h" > > > > > > Hi Greg, Jiri, does this look reasonable to you? > > > The cross tree include raises an obvious red flag. > > > > Yeah, that looks wrong. > > > > > Should serial / u8250 provide a more official API? > > > > If it needs to, but why is this driver poking around in here at all? > > Hi Greg! > > Well, the original idea was to have symlinks with self-explanatory names > to real serial devices exposed by PCIe device. Why is that needed? What is wrong with the normal device topology in /sys/devices/ that shows this already? > > > Can we use device_for_each_child() to deal with the extra > > > layer in the hierarchy? > > > > Or a real function where needed? > > yep. > > > > > > > > > > #define PCI_VENDOR_ID_FACEBOOK 0x1d9b > > > > #define PCI_DEVICE_ID_FACEBOOK_TIMECARD 0x0400 > > > > @@ -4330,11 +4332,9 @@ ptp_ocp_symlink(struct ptp_ocp *bp, struct device *child, const char *link) > > > > } > > > > static void > > > > -ptp_ocp_link_child(struct ptp_ocp *bp, const char *name, const char *link) > > > > +ptp_ocp_link_child(struct ptp_ocp *bp, struct device *dev, const char *name, const char *link) > > > > { > > > > - struct device *dev, *child; > > > > - > > > > - dev = &bp->pdev->dev; > > > > + struct device *child; > > > > child = device_find_child_by_name(dev, name); > > > > if (!child) { > > > > @@ -4349,27 +4349,39 @@ ptp_ocp_link_child(struct ptp_ocp *bp, const char *name, const char *link) > > > > static int > > > > ptp_ocp_complete(struct ptp_ocp *bp) > > > > { > > > > + struct device *dev, *port_dev; > > > > + struct uart_8250_port *port; > > > > struct pps_device *pps; > > > > char buf[32]; > > > > + dev = &bp->pdev->dev; > > > > + > > > > if (bp->gnss_port.line != -1) { > > > > + port = serial8250_get_port(bp->gnss_port.line); > > > > + port_dev = (struct device *)port->port.port_dev; > > > > That cast is not going to go well. How do you know this is always > > true? > > AFAIU, port_dev starts with struct dev always. That's why it's safe. > > > > > What was the original code attempting to do? It feels like that was > > wrong to start with if merely moving things around the device tree > > caused anything to break here. That is not how the driver core is > > supposed to be used at all. > > > > We just want to have a symlink with meaningful name to real tty device, > exposed by PCIe device. We provide up to 4 serial ports - GNSS, GNSS2, > MAC and NMEA, to user space and we don't want user space to guess which > one is which. We do have user space application which relies on symlinks > to discover features. Just use the normal serial topology please. And for your named devices, use the symlinks in /dev/serial/ that are provided for you already. > We don't use device tree because it's PCIe device with pre-defined > functions, so I don't see any other way to get this info and properly > create symlinks. Sorry, I didn't mean "dt", I mean /sys/devices/, there should not be anything "special" about this driver that requires custom symlinks in sysfs. That's for userspace to create in /dev/serial/ as it does today. Please just remove all of this, as it's not a good idea at all. thanks, greg k-h
On Wed, May 22, 2024 at 01:39:21PM +0100, Vadim Fedorenko wrote: > On 10/05/2024 12:13, Greg Kroah-Hartman wrote: > > On Fri, May 10, 2024 at 11:04:05AM +0000, Vadim Fedorenko wrote: > > > The commit b286f4e87e32 ("serial: core: Move tty and serdev to be children > > > of serial core port device") changed the hierarchy of serial port devices > > > and device_find_child_by_name cannot find ttyS* devices because they are > > > no longer directly attached. Add some logic to restore symlinks creation > > > to the driver for OCP TimeCard. > > > > > > Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device") > > > Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> > > > --- > > > v2: > > > add serial/8250 maintainers > > > --- > > > drivers/ptp/ptp_ocp.c | 30 +++++++++++++++++++++--------- > > > 1 file changed, 21 insertions(+), 9 deletions(-) > > > > Hi, > > > > This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him > > a patch that has triggered this response. He used to manually respond > > to these common problems, but in order to save his sanity (he kept > > writing the same thing over and over, yet to different people), I was > > created. Hopefully you will not take offence and will fix the problem > > in your patch and resubmit it so that it can be accepted into the Linux > > kernel tree. > > > > You are receiving this message because of the following common error(s) > > as indicated below: > > > > - You have marked a patch with a "Fixes:" tag for a commit that is in an > > older released kernel, yet you do not have a cc: stable line in the > > signed-off-by area at all, which means that the patch will not be > > applied to any older kernel releases. To properly fix this, please > > follow the documented rules in the > > Documentation/process/stable-kernel-rules.rst file for how to resolve > > this. > > > > If you wish to discuss this problem further, or you have questions about > > how to resolve this issue, please feel free to respond to this email and > > Greg will reply once he has dug out from the pending patches received > > from other developers. > > Hi Greg! > > Just gentle ping, I'm still looking for better solution for serial > device lookup in TimeCard driver. See my comment on the other patch in this thread. In short, you shouldn't need to do any of this. thanks, greg k-h
On 04/06/2024 12:50, Greg Kroah-Hartman wrote: > On Wed, May 22, 2024 at 01:39:21PM +0100, Vadim Fedorenko wrote: >> On 10/05/2024 12:13, Greg Kroah-Hartman wrote: >>> On Fri, May 10, 2024 at 11:04:05AM +0000, Vadim Fedorenko wrote: >>>> The commit b286f4e87e32 ("serial: core: Move tty and serdev to be children >>>> of serial core port device") changed the hierarchy of serial port devices >>>> and device_find_child_by_name cannot find ttyS* devices because they are >>>> no longer directly attached. Add some logic to restore symlinks creation >>>> to the driver for OCP TimeCard. >>>> >>>> Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device") >>>> Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> >>>> --- >>>> v2: >>>> add serial/8250 maintainers >>>> --- >>>> drivers/ptp/ptp_ocp.c | 30 +++++++++++++++++++++--------- >>>> 1 file changed, 21 insertions(+), 9 deletions(-) >>> >>> Hi, >>> >>> This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him >>> a patch that has triggered this response. He used to manually respond >>> to these common problems, but in order to save his sanity (he kept >>> writing the same thing over and over, yet to different people), I was >>> created. Hopefully you will not take offence and will fix the problem >>> in your patch and resubmit it so that it can be accepted into the Linux >>> kernel tree. >>> >>> You are receiving this message because of the following common error(s) >>> as indicated below: >>> >>> - You have marked a patch with a "Fixes:" tag for a commit that is in an >>> older released kernel, yet you do not have a cc: stable line in the >>> signed-off-by area at all, which means that the patch will not be >>> applied to any older kernel releases. To properly fix this, please >>> follow the documented rules in the >>> Documentation/process/stable-kernel-rules.rst file for how to resolve >>> this. >>> >>> If you wish to discuss this problem further, or you have questions about >>> how to resolve this issue, please feel free to respond to this email and >>> Greg will reply once he has dug out from the pending patches received >>> from other developers. >> >> Hi Greg! >> >> Just gentle ping, I'm still looking for better solution for serial >> device lookup in TimeCard driver. > > See my comment on the other patch in this thread. > > In short, you shouldn't need to do any of this. Got it, thanks. I'll try to find another way. > thanks, > > greg k-h
On Wed, Jun 05, 2024 at 12:53:13AM +0100, Vadim Fedorenko wrote: > On 04/06/2024 12:50, Greg Kroah-Hartman wrote: > > On Wed, May 22, 2024 at 01:39:21PM +0100, Vadim Fedorenko wrote: > > > On 10/05/2024 12:13, Greg Kroah-Hartman wrote: > > > > On Fri, May 10, 2024 at 11:04:05AM +0000, Vadim Fedorenko wrote: > > > > > The commit b286f4e87e32 ("serial: core: Move tty and serdev to be children > > > > > of serial core port device") changed the hierarchy of serial port devices > > > > > and device_find_child_by_name cannot find ttyS* devices because they are > > > > > no longer directly attached. Add some logic to restore symlinks creation > > > > > to the driver for OCP TimeCard. > > > > > > > > > > Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device") > > > > > Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> > > > > > --- > > > > > v2: > > > > > add serial/8250 maintainers > > > > > --- > > > > > drivers/ptp/ptp_ocp.c | 30 +++++++++++++++++++++--------- > > > > > 1 file changed, 21 insertions(+), 9 deletions(-) > > > > > > > > Hi, > > > > > > > > This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him > > > > a patch that has triggered this response. He used to manually respond > > > > to these common problems, but in order to save his sanity (he kept > > > > writing the same thing over and over, yet to different people), I was > > > > created. Hopefully you will not take offence and will fix the problem > > > > in your patch and resubmit it so that it can be accepted into the Linux > > > > kernel tree. > > > > > > > > You are receiving this message because of the following common error(s) > > > > as indicated below: > > > > > > > > - You have marked a patch with a "Fixes:" tag for a commit that is in an > > > > older released kernel, yet you do not have a cc: stable line in the > > > > signed-off-by area at all, which means that the patch will not be > > > > applied to any older kernel releases. To properly fix this, please > > > > follow the documented rules in the > > > > Documentation/process/stable-kernel-rules.rst file for how to resolve > > > > this. > > > > > > > > If you wish to discuss this problem further, or you have questions about > > > > how to resolve this issue, please feel free to respond to this email and > > > > Greg will reply once he has dug out from the pending patches received > > > > from other developers. > > > > > > Hi Greg! > > > > > > Just gentle ping, I'm still looking for better solution for serial > > > device lookup in TimeCard driver. > > > > See my comment on the other patch in this thread. > > > > In short, you shouldn't need to do any of this. > > Got it, thanks. I'll try to find another way. Wait, no, please just remove all that, it should not be needed at all.
On 05/06/2024 11:05, Greg Kroah-Hartman wrote: > On Wed, Jun 05, 2024 at 12:53:13AM +0100, Vadim Fedorenko wrote: >> On 04/06/2024 12:50, Greg Kroah-Hartman wrote: >>> On Wed, May 22, 2024 at 01:39:21PM +0100, Vadim Fedorenko wrote: >>>> On 10/05/2024 12:13, Greg Kroah-Hartman wrote: >>>>> On Fri, May 10, 2024 at 11:04:05AM +0000, Vadim Fedorenko wrote: >>>>>> The commit b286f4e87e32 ("serial: core: Move tty and serdev to be children >>>>>> of serial core port device") changed the hierarchy of serial port devices >>>>>> and device_find_child_by_name cannot find ttyS* devices because they are >>>>>> no longer directly attached. Add some logic to restore symlinks creation >>>>>> to the driver for OCP TimeCard. >>>>>> >>>>>> Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device") >>>>>> Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> >>>>>> --- >>>>>> v2: >>>>>> add serial/8250 maintainers >>>>>> --- >>>>>> drivers/ptp/ptp_ocp.c | 30 +++++++++++++++++++++--------- >>>>>> 1 file changed, 21 insertions(+), 9 deletions(-) >>>>> >>>>> Hi, >>>>> >>>>> This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him >>>>> a patch that has triggered this response. He used to manually respond >>>>> to these common problems, but in order to save his sanity (he kept >>>>> writing the same thing over and over, yet to different people), I was >>>>> created. Hopefully you will not take offence and will fix the problem >>>>> in your patch and resubmit it so that it can be accepted into the Linux >>>>> kernel tree. >>>>> >>>>> You are receiving this message because of the following common error(s) >>>>> as indicated below: >>>>> >>>>> - You have marked a patch with a "Fixes:" tag for a commit that is in an >>>>> older released kernel, yet you do not have a cc: stable line in the >>>>> signed-off-by area at all, which means that the patch will not be >>>>> applied to any older kernel releases. To properly fix this, please >>>>> follow the documented rules in the >>>>> Documentation/process/stable-kernel-rules.rst file for how to resolve >>>>> this. >>>>> >>>>> If you wish to discuss this problem further, or you have questions about >>>>> how to resolve this issue, please feel free to respond to this email and >>>>> Greg will reply once he has dug out from the pending patches received >>>>> from other developers. >>>> >>>> Hi Greg! >>>> >>>> Just gentle ping, I'm still looking for better solution for serial >>>> device lookup in TimeCard driver. >>> >>> See my comment on the other patch in this thread. >>> >>> In short, you shouldn't need to do any of this. >> >> Got it, thanks. I'll try to find another way. > > Wait, no, please just remove all that, it should not be needed at all. Do you mean remove symlinks from the driver? We have open-source user-space software which relies on them to discover proper devices. If I remove symlinks it will break the software.
On Wed, Jun 05, 2024 at 11:14:28AM +0100, Vadim Fedorenko wrote: > On 05/06/2024 11:05, Greg Kroah-Hartman wrote: > > On Wed, Jun 05, 2024 at 12:53:13AM +0100, Vadim Fedorenko wrote: > > > On 04/06/2024 12:50, Greg Kroah-Hartman wrote: > > > > On Wed, May 22, 2024 at 01:39:21PM +0100, Vadim Fedorenko wrote: > > > > > On 10/05/2024 12:13, Greg Kroah-Hartman wrote: > > > > > > On Fri, May 10, 2024 at 11:04:05AM +0000, Vadim Fedorenko wrote: > > > > > > > The commit b286f4e87e32 ("serial: core: Move tty and serdev to be children > > > > > > > of serial core port device") changed the hierarchy of serial port devices > > > > > > > and device_find_child_by_name cannot find ttyS* devices because they are > > > > > > > no longer directly attached. Add some logic to restore symlinks creation > > > > > > > to the driver for OCP TimeCard. > > > > > > > > > > > > > > Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device") > > > > > > > Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> > > > > > > > --- > > > > > > > v2: > > > > > > > add serial/8250 maintainers > > > > > > > --- > > > > > > > drivers/ptp/ptp_ocp.c | 30 +++++++++++++++++++++--------- > > > > > > > 1 file changed, 21 insertions(+), 9 deletions(-) > > > > > > > > > > > > Hi, > > > > > > > > > > > > This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him > > > > > > a patch that has triggered this response. He used to manually respond > > > > > > to these common problems, but in order to save his sanity (he kept > > > > > > writing the same thing over and over, yet to different people), I was > > > > > > created. Hopefully you will not take offence and will fix the problem > > > > > > in your patch and resubmit it so that it can be accepted into the Linux > > > > > > kernel tree. > > > > > > > > > > > > You are receiving this message because of the following common error(s) > > > > > > as indicated below: > > > > > > > > > > > > - You have marked a patch with a "Fixes:" tag for a commit that is in an > > > > > > older released kernel, yet you do not have a cc: stable line in the > > > > > > signed-off-by area at all, which means that the patch will not be > > > > > > applied to any older kernel releases. To properly fix this, please > > > > > > follow the documented rules in the > > > > > > Documentation/process/stable-kernel-rules.rst file for how to resolve > > > > > > this. > > > > > > > > > > > > If you wish to discuss this problem further, or you have questions about > > > > > > how to resolve this issue, please feel free to respond to this email and > > > > > > Greg will reply once he has dug out from the pending patches received > > > > > > from other developers. > > > > > > > > > > Hi Greg! > > > > > > > > > > Just gentle ping, I'm still looking for better solution for serial > > > > > device lookup in TimeCard driver. > > > > > > > > See my comment on the other patch in this thread. > > > > > > > > In short, you shouldn't need to do any of this. > > > > > > Got it, thanks. I'll try to find another way. > > > > Wait, no, please just remove all that, it should not be needed at all. > > Do you mean remove symlinks from the driver? We have open-source > user-space software which relies on them to discover proper devices. If > I remove symlinks it will break the software. the symlinks should be done in userspace in the /dev/serial/ directory, why would userspace need to know the symlink of the serial device in a sysfs tree? What exactly are you trying to represent here that requires this to be a custom thing? thanks, greg k-h
On 05/06/2024 11:41, Greg Kroah-Hartman wrote: > On Wed, Jun 05, 2024 at 11:14:28AM +0100, Vadim Fedorenko wrote: >> On 05/06/2024 11:05, Greg Kroah-Hartman wrote: >>> On Wed, Jun 05, 2024 at 12:53:13AM +0100, Vadim Fedorenko wrote: >>>> On 04/06/2024 12:50, Greg Kroah-Hartman wrote: >>>>> On Wed, May 22, 2024 at 01:39:21PM +0100, Vadim Fedorenko wrote: >>>>>> On 10/05/2024 12:13, Greg Kroah-Hartman wrote: >>>>>>> On Fri, May 10, 2024 at 11:04:05AM +0000, Vadim Fedorenko wrote: >>>>>>>> The commit b286f4e87e32 ("serial: core: Move tty and serdev to be children >>>>>>>> of serial core port device") changed the hierarchy of serial port devices >>>>>>>> and device_find_child_by_name cannot find ttyS* devices because they are >>>>>>>> no longer directly attached. Add some logic to restore symlinks creation >>>>>>>> to the driver for OCP TimeCard. >>>>>>>> >>>>>>>> Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device") >>>>>>>> Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> >>>>>>>> --- >>>>>>>> v2: >>>>>>>> add serial/8250 maintainers >>>>>>>> --- >>>>>>>> drivers/ptp/ptp_ocp.c | 30 +++++++++++++++++++++--------- >>>>>>>> 1 file changed, 21 insertions(+), 9 deletions(-) >>>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him >>>>>>> a patch that has triggered this response. He used to manually respond >>>>>>> to these common problems, but in order to save his sanity (he kept >>>>>>> writing the same thing over and over, yet to different people), I was >>>>>>> created. Hopefully you will not take offence and will fix the problem >>>>>>> in your patch and resubmit it so that it can be accepted into the Linux >>>>>>> kernel tree. >>>>>>> >>>>>>> You are receiving this message because of the following common error(s) >>>>>>> as indicated below: >>>>>>> >>>>>>> - You have marked a patch with a "Fixes:" tag for a commit that is in an >>>>>>> older released kernel, yet you do not have a cc: stable line in the >>>>>>> signed-off-by area at all, which means that the patch will not be >>>>>>> applied to any older kernel releases. To properly fix this, please >>>>>>> follow the documented rules in the >>>>>>> Documentation/process/stable-kernel-rules.rst file for how to resolve >>>>>>> this. >>>>>>> >>>>>>> If you wish to discuss this problem further, or you have questions about >>>>>>> how to resolve this issue, please feel free to respond to this email and >>>>>>> Greg will reply once he has dug out from the pending patches received >>>>>>> from other developers. >>>>>> >>>>>> Hi Greg! >>>>>> >>>>>> Just gentle ping, I'm still looking for better solution for serial >>>>>> device lookup in TimeCard driver. >>>>> >>>>> See my comment on the other patch in this thread. >>>>> >>>>> In short, you shouldn't need to do any of this. >>>> >>>> Got it, thanks. I'll try to find another way. >>> >>> Wait, no, please just remove all that, it should not be needed at all. >> >> Do you mean remove symlinks from the driver? We have open-source >> user-space software which relies on them to discover proper devices. If >> I remove symlinks it will break the software. > > the symlinks should be done in userspace in the /dev/serial/ directory, > why would userspace need to know the symlink of the serial device in > a sysfs tree? What exactly are you trying to represent here that > requires this to be a custom thing? Well, the hardware exposes up to 4 different serial ports for different functions. And only driver knows which feature is attached to which port because of differences in the HW. There is no way for user-space to get this information on it's own. And one more thing, some HW versions expose special attributes in sysfs consumed by the same software. And there are setups with several boards in the system. Currently we separate them by providing different sysfs entries only, the software then figures all details automatically. Thanks, Vadim
On Wed, Jun 05, 2024 at 11:59:30AM +0100, Vadim Fedorenko wrote: > On 05/06/2024 11:41, Greg Kroah-Hartman wrote: > > On Wed, Jun 05, 2024 at 11:14:28AM +0100, Vadim Fedorenko wrote: > > > On 05/06/2024 11:05, Greg Kroah-Hartman wrote: > > > > On Wed, Jun 05, 2024 at 12:53:13AM +0100, Vadim Fedorenko wrote: > > > > > On 04/06/2024 12:50, Greg Kroah-Hartman wrote: > > > > > > On Wed, May 22, 2024 at 01:39:21PM +0100, Vadim Fedorenko wrote: > > > > > > > On 10/05/2024 12:13, Greg Kroah-Hartman wrote: > > > > > > > > On Fri, May 10, 2024 at 11:04:05AM +0000, Vadim Fedorenko wrote: > > > > > > > > > The commit b286f4e87e32 ("serial: core: Move tty and serdev to be children > > > > > > > > > of serial core port device") changed the hierarchy of serial port devices > > > > > > > > > and device_find_child_by_name cannot find ttyS* devices because they are > > > > > > > > > no longer directly attached. Add some logic to restore symlinks creation > > > > > > > > > to the driver for OCP TimeCard. > > > > > > > > > > > > > > > > > > Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device") > > > > > > > > > Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> > > > > > > > > > --- > > > > > > > > > v2: > > > > > > > > > add serial/8250 maintainers > > > > > > > > > --- > > > > > > > > > drivers/ptp/ptp_ocp.c | 30 +++++++++++++++++++++--------- > > > > > > > > > 1 file changed, 21 insertions(+), 9 deletions(-) > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him > > > > > > > > a patch that has triggered this response. He used to manually respond > > > > > > > > to these common problems, but in order to save his sanity (he kept > > > > > > > > writing the same thing over and over, yet to different people), I was > > > > > > > > created. Hopefully you will not take offence and will fix the problem > > > > > > > > in your patch and resubmit it so that it can be accepted into the Linux > > > > > > > > kernel tree. > > > > > > > > > > > > > > > > You are receiving this message because of the following common error(s) > > > > > > > > as indicated below: > > > > > > > > > > > > > > > > - You have marked a patch with a "Fixes:" tag for a commit that is in an > > > > > > > > older released kernel, yet you do not have a cc: stable line in the > > > > > > > > signed-off-by area at all, which means that the patch will not be > > > > > > > > applied to any older kernel releases. To properly fix this, please > > > > > > > > follow the documented rules in the > > > > > > > > Documentation/process/stable-kernel-rules.rst file for how to resolve > > > > > > > > this. > > > > > > > > > > > > > > > > If you wish to discuss this problem further, or you have questions about > > > > > > > > how to resolve this issue, please feel free to respond to this email and > > > > > > > > Greg will reply once he has dug out from the pending patches received > > > > > > > > from other developers. > > > > > > > > > > > > > > Hi Greg! > > > > > > > > > > > > > > Just gentle ping, I'm still looking for better solution for serial > > > > > > > device lookup in TimeCard driver. > > > > > > > > > > > > See my comment on the other patch in this thread. > > > > > > > > > > > > In short, you shouldn't need to do any of this. > > > > > > > > > > Got it, thanks. I'll try to find another way. > > > > > > > > Wait, no, please just remove all that, it should not be needed at all. > > > > > > Do you mean remove symlinks from the driver? We have open-source > > > user-space software which relies on them to discover proper devices. If > > > I remove symlinks it will break the software. > > > > the symlinks should be done in userspace in the /dev/serial/ directory, > > why would userspace need to know the symlink of the serial device in > > a sysfs tree? What exactly are you trying to represent here that > > requires this to be a custom thing? > > Well, the hardware exposes up to 4 different serial ports for different > functions. And only driver knows which feature is attached to which port > because of differences in the HW. There is no way for user-space to get > this information on it's own. The serial ports have a specific parent, why aren't those parents described differently in userspace? Why not tell userspace those functions? > And one more thing, some HW versions > expose special attributes in sysfs consumed by the same software. > And there are setups with several boards in the system. Currently we > separate them by providing different sysfs entries only, the software > then figures all details automatically. Again, export that info to userspace and have it choose, don't create random symlinks in sysfs for your specific policy, that is not what sysfs is for at all. thanks, greg k-h
On 05/06/2024 12:07, Greg Kroah-Hartman wrote: > On Wed, Jun 05, 2024 at 11:59:30AM +0100, Vadim Fedorenko wrote: >> On 05/06/2024 11:41, Greg Kroah-Hartman wrote: >>> On Wed, Jun 05, 2024 at 11:14:28AM +0100, Vadim Fedorenko wrote: >>>> On 05/06/2024 11:05, Greg Kroah-Hartman wrote: >>>>> On Wed, Jun 05, 2024 at 12:53:13AM +0100, Vadim Fedorenko wrote: >>>>>> On 04/06/2024 12:50, Greg Kroah-Hartman wrote: >>>>>>> On Wed, May 22, 2024 at 01:39:21PM +0100, Vadim Fedorenko wrote: >>>>>>>> On 10/05/2024 12:13, Greg Kroah-Hartman wrote: >>>>>>>>> On Fri, May 10, 2024 at 11:04:05AM +0000, Vadim Fedorenko wrote: >>>>>>>>>> The commit b286f4e87e32 ("serial: core: Move tty and serdev to be children >>>>>>>>>> of serial core port device") changed the hierarchy of serial port devices >>>>>>>>>> and device_find_child_by_name cannot find ttyS* devices because they are >>>>>>>>>> no longer directly attached. Add some logic to restore symlinks creation >>>>>>>>>> to the driver for OCP TimeCard. >>>>>>>>>> >>>>>>>>>> Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device") >>>>>>>>>> Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> >>>>>>>>>> --- >>>>>>>>>> v2: >>>>>>>>>> add serial/8250 maintainers >>>>>>>>>> --- >>>>>>>>>> drivers/ptp/ptp_ocp.c | 30 +++++++++++++++++++++--------- >>>>>>>>>> 1 file changed, 21 insertions(+), 9 deletions(-) >>>>>>>>> >>>>>>>>> Hi, >>>>>>>>> >>>>>>>>> This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him >>>>>>>>> a patch that has triggered this response. He used to manually respond >>>>>>>>> to these common problems, but in order to save his sanity (he kept >>>>>>>>> writing the same thing over and over, yet to different people), I was >>>>>>>>> created. Hopefully you will not take offence and will fix the problem >>>>>>>>> in your patch and resubmit it so that it can be accepted into the Linux >>>>>>>>> kernel tree. >>>>>>>>> >>>>>>>>> You are receiving this message because of the following common error(s) >>>>>>>>> as indicated below: >>>>>>>>> >>>>>>>>> - You have marked a patch with a "Fixes:" tag for a commit that is in an >>>>>>>>> older released kernel, yet you do not have a cc: stable line in the >>>>>>>>> signed-off-by area at all, which means that the patch will not be >>>>>>>>> applied to any older kernel releases. To properly fix this, please >>>>>>>>> follow the documented rules in the >>>>>>>>> Documentation/process/stable-kernel-rules.rst file for how to resolve >>>>>>>>> this. >>>>>>>>> >>>>>>>>> If you wish to discuss this problem further, or you have questions about >>>>>>>>> how to resolve this issue, please feel free to respond to this email and >>>>>>>>> Greg will reply once he has dug out from the pending patches received >>>>>>>>> from other developers. >>>>>>>> >>>>>>>> Hi Greg! >>>>>>>> >>>>>>>> Just gentle ping, I'm still looking for better solution for serial >>>>>>>> device lookup in TimeCard driver. >>>>>>> >>>>>>> See my comment on the other patch in this thread. >>>>>>> >>>>>>> In short, you shouldn't need to do any of this. >>>>>> >>>>>> Got it, thanks. I'll try to find another way. >>>>> >>>>> Wait, no, please just remove all that, it should not be needed at all. >>>> >>>> Do you mean remove symlinks from the driver? We have open-source >>>> user-space software which relies on them to discover proper devices. If >>>> I remove symlinks it will break the software. >>> >>> the symlinks should be done in userspace in the /dev/serial/ directory, >>> why would userspace need to know the symlink of the serial device in >>> a sysfs tree? What exactly are you trying to represent here that >>> requires this to be a custom thing? >> >> Well, the hardware exposes up to 4 different serial ports for different >> functions. And only driver knows which feature is attached to which port >> because of differences in the HW. There is no way for user-space to get >> this information on it's own. > > The serial ports have a specific parent, why aren't those parents > described differently in userspace? Why not tell userspace those > functions? There is only 1 parent for the serial ports - the pci device driven by ptp_ocp. The physical devices behind these serial ports are not able to do proper pci function. >> And one more thing, some HW versions >> expose special attributes in sysfs consumed by the same software. >> And there are setups with several boards in the system. Currently we >> separate them by providing different sysfs entries only, the software >> then figures all details automatically. > > Again, export that info to userspace and have it choose, don't create > random symlinks in sysfs for your specific policy, that is not what > sysfs is for at all. Yes, that's what I'm thinking about now - export serial ports as another attributes of the device. Thanks, Vadim
On Wed, Jun 05, 2024 at 12:25:26PM +0100, Vadim Fedorenko wrote: > On 05/06/2024 12:07, Greg Kroah-Hartman wrote: > > On Wed, Jun 05, 2024 at 11:59:30AM +0100, Vadim Fedorenko wrote: > > > On 05/06/2024 11:41, Greg Kroah-Hartman wrote: > > > > On Wed, Jun 05, 2024 at 11:14:28AM +0100, Vadim Fedorenko wrote: > > > > > On 05/06/2024 11:05, Greg Kroah-Hartman wrote: > > > > > > On Wed, Jun 05, 2024 at 12:53:13AM +0100, Vadim Fedorenko wrote: > > > > > > > On 04/06/2024 12:50, Greg Kroah-Hartman wrote: > > > > > > > > On Wed, May 22, 2024 at 01:39:21PM +0100, Vadim Fedorenko wrote: > > > > > > > > > On 10/05/2024 12:13, Greg Kroah-Hartman wrote: > > > > > > > > > > On Fri, May 10, 2024 at 11:04:05AM +0000, Vadim Fedorenko wrote: > > > > > > > > > > > The commit b286f4e87e32 ("serial: core: Move tty and serdev to be children > > > > > > > > > > > of serial core port device") changed the hierarchy of serial port devices > > > > > > > > > > > and device_find_child_by_name cannot find ttyS* devices because they are > > > > > > > > > > > no longer directly attached. Add some logic to restore symlinks creation > > > > > > > > > > > to the driver for OCP TimeCard. > > > > > > > > > > > > > > > > > > > > > > Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device") > > > > > > > > > > > Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> > > > > > > > > > > > --- > > > > > > > > > > > v2: > > > > > > > > > > > add serial/8250 maintainers > > > > > > > > > > > --- > > > > > > > > > > > drivers/ptp/ptp_ocp.c | 30 +++++++++++++++++++++--------- > > > > > > > > > > > 1 file changed, 21 insertions(+), 9 deletions(-) > > > > > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > > > > > This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him > > > > > > > > > > a patch that has triggered this response. He used to manually respond > > > > > > > > > > to these common problems, but in order to save his sanity (he kept > > > > > > > > > > writing the same thing over and over, yet to different people), I was > > > > > > > > > > created. Hopefully you will not take offence and will fix the problem > > > > > > > > > > in your patch and resubmit it so that it can be accepted into the Linux > > > > > > > > > > kernel tree. > > > > > > > > > > > > > > > > > > > > You are receiving this message because of the following common error(s) > > > > > > > > > > as indicated below: > > > > > > > > > > > > > > > > > > > > - You have marked a patch with a "Fixes:" tag for a commit that is in an > > > > > > > > > > older released kernel, yet you do not have a cc: stable line in the > > > > > > > > > > signed-off-by area at all, which means that the patch will not be > > > > > > > > > > applied to any older kernel releases. To properly fix this, please > > > > > > > > > > follow the documented rules in the > > > > > > > > > > Documentation/process/stable-kernel-rules.rst file for how to resolve > > > > > > > > > > this. > > > > > > > > > > > > > > > > > > > > If you wish to discuss this problem further, or you have questions about > > > > > > > > > > how to resolve this issue, please feel free to respond to this email and > > > > > > > > > > Greg will reply once he has dug out from the pending patches received > > > > > > > > > > from other developers. > > > > > > > > > > > > > > > > > > Hi Greg! > > > > > > > > > > > > > > > > > > Just gentle ping, I'm still looking for better solution for serial > > > > > > > > > device lookup in TimeCard driver. > > > > > > > > > > > > > > > > See my comment on the other patch in this thread. > > > > > > > > > > > > > > > > In short, you shouldn't need to do any of this. > > > > > > > > > > > > > > Got it, thanks. I'll try to find another way. > > > > > > > > > > > > Wait, no, please just remove all that, it should not be needed at all. > > > > > > > > > > Do you mean remove symlinks from the driver? We have open-source > > > > > user-space software which relies on them to discover proper devices. If > > > > > I remove symlinks it will break the software. > > > > > > > > the symlinks should be done in userspace in the /dev/serial/ directory, > > > > why would userspace need to know the symlink of the serial device in > > > > a sysfs tree? What exactly are you trying to represent here that > > > > requires this to be a custom thing? > > > > > > Well, the hardware exposes up to 4 different serial ports for different > > > functions. And only driver knows which feature is attached to which port > > > because of differences in the HW. There is no way for user-space to get > > > this information on it's own. > > > > The serial ports have a specific parent, why aren't those parents > > described differently in userspace? Why not tell userspace those > > functions? > > There is only 1 parent for the serial ports - the pci device driven by > ptp_ocp. The physical devices behind these serial ports are not able to > do proper pci function. Then make those "physical devices" on the aux bus, splitting the PCI device "apart". That's what the aux bus is for. > > > And one more thing, some HW versions > > > expose special attributes in sysfs consumed by the same software. > > > And there are setups with several boards in the system. Currently we > > > separate them by providing different sysfs entries only, the software > > > then figures all details automatically. > > > > Again, export that info to userspace and have it choose, don't create > > random symlinks in sysfs for your specific policy, that is not what > > sysfs is for at all. > > Yes, that's what I'm thinking about now - export serial ports as another > attributes of the device. Or use the aux bus :) thanks, greg k-h
Fri, May 10, 2024 at 11:04:05AM +0000, Vadim Fedorenko kirjoitti: > The commit b286f4e87e32 ("serial: core: Move tty and serdev to be children > of serial core port device") changed the hierarchy of serial port devices > and device_find_child_by_name cannot find ttyS* devices because they are > no longer directly attached. Add some logic to restore symlinks creation > to the driver for OCP TimeCard. I know that I'm a bit late to the party, but this patch looks like an ugly hack. The PTP OCP code, in my opinion, needs a lot of love besides the UART part.
diff --git a/drivers/ptp/ptp_ocp.c b/drivers/ptp/ptp_ocp.c index ee2ced88ab34..50b7cb9db3be 100644 --- a/drivers/ptp/ptp_ocp.c +++ b/drivers/ptp/ptp_ocp.c @@ -25,6 +25,8 @@ #include <linux/crc16.h> #include <linux/dpll.h> +#include "../tty/serial/8250/8250.h" + #define PCI_VENDOR_ID_FACEBOOK 0x1d9b #define PCI_DEVICE_ID_FACEBOOK_TIMECARD 0x0400 @@ -4330,11 +4332,9 @@ ptp_ocp_symlink(struct ptp_ocp *bp, struct device *child, const char *link) } static void -ptp_ocp_link_child(struct ptp_ocp *bp, const char *name, const char *link) +ptp_ocp_link_child(struct ptp_ocp *bp, struct device *dev, const char *name, const char *link) { - struct device *dev, *child; - - dev = &bp->pdev->dev; + struct device *child; child = device_find_child_by_name(dev, name); if (!child) { @@ -4349,27 +4349,39 @@ ptp_ocp_link_child(struct ptp_ocp *bp, const char *name, const char *link) static int ptp_ocp_complete(struct ptp_ocp *bp) { + struct device *dev, *port_dev; + struct uart_8250_port *port; struct pps_device *pps; char buf[32]; + dev = &bp->pdev->dev; + if (bp->gnss_port.line != -1) { + port = serial8250_get_port(bp->gnss_port.line); + port_dev = (struct device *)port->port.port_dev; sprintf(buf, "ttyS%d", bp->gnss_port.line); - ptp_ocp_link_child(bp, buf, "ttyGNSS"); + ptp_ocp_link_child(bp, port_dev, buf, "ttyGNSS"); } if (bp->gnss2_port.line != -1) { + port = serial8250_get_port(bp->gnss2_port.line); + port_dev = (struct device *)port->port.port_dev; sprintf(buf, "ttyS%d", bp->gnss2_port.line); - ptp_ocp_link_child(bp, buf, "ttyGNSS2"); + ptp_ocp_link_child(bp, port_dev, buf, "ttyGNSS2"); } if (bp->mac_port.line != -1) { + port = serial8250_get_port(bp->mac_port.line); + port_dev = (struct device *)port->port.port_dev; sprintf(buf, "ttyS%d", bp->mac_port.line); - ptp_ocp_link_child(bp, buf, "ttyMAC"); + ptp_ocp_link_child(bp, port_dev, buf, "ttyMAC"); } if (bp->nmea_port.line != -1) { + port = serial8250_get_port(bp->nmea_port.line); + port_dev = (struct device *)port->port.port_dev; sprintf(buf, "ttyS%d", bp->nmea_port.line); - ptp_ocp_link_child(bp, buf, "ttyNMEA"); + ptp_ocp_link_child(bp, port_dev, buf, "ttyNMEA"); } sprintf(buf, "ptp%d", ptp_clock_index(bp->ptp)); - ptp_ocp_link_child(bp, buf, "ptp"); + ptp_ocp_link_child(bp, dev, buf, "ptp"); pps = pps_lookup_dev(bp->ptp); if (pps)
The commit b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device") changed the hierarchy of serial port devices and device_find_child_by_name cannot find ttyS* devices because they are no longer directly attached. Add some logic to restore symlinks creation to the driver for OCP TimeCard. Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device") Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> --- v2: add serial/8250 maintainers --- drivers/ptp/ptp_ocp.c | 30 +++++++++++++++++++++--------- 1 file changed, 21 insertions(+), 9 deletions(-)