@@ -189,7 +189,13 @@
reg = <0x80157000 0x1000>;
interrupts = <46 47>;
#address-cells = <1>;
- #size-cells = <0>;
+ #size-cells = <1>;
+ ranges;
+
+ prcmu-timer-4@80157450 {
+ compatible = "stericsson,db8500-prcmu-timer-4";
+ reg = <0x80157450 0xC>;
+ };
ab8500@5 {
compatible = "stericsson,ab8500";
@@ -8,6 +8,7 @@
#include <linux/errno.h>
#include <linux/clksrc-dbx500-prcmu.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <asm/smp_twd.h>
@@ -43,10 +44,17 @@ static void __init ux500_twd_init(void)
#define ux500_twd_init() do { } while(0)
#endif
+const static struct of_device_id prcmu_timer_of_match[] __initconst = {
+ { .compatible = "stericsson,db8500-prcmu-timer-4", },
+ { },
+};
+
static void __init ux500_timer_init(void)
{
void __iomem *mtu_timer_base;
void __iomem *prcmu_timer_base;
+ void __iomem *tmp_base;
+ struct device_node *np;
if (cpu_is_u5500()) {
mtu_timer_base = __io_address(U5500_MTU0_BASE);
@@ -58,6 +66,22 @@ static void __init ux500_timer_init(void)
ux500_unknown_soc();
}
+ /* TODO: Once MTU has been DT:ed place code above into else. */
+ if (of_have_populated_dt()) {
+ np = of_find_matching_node(NULL, prcmu_timer_of_match);
+ if (!np)
+ goto dt_fail;
+
+ tmp_base = of_iomap(np, 0);
+ if (!tmp_base)
+ goto dt_fail;
+
+ prcmu_timer_base = tmp_base;
+ }
+
+dt_fail:
+ /* Doing it the old fashioned way. */
+
/*
* Here we register the timerblocks active in the system.
* Localtimers (twd) is started when both cpu is up and running.
In dbx500 based devices the PRCMU Timer 4 is used as a clocksource and sched_clock. Here we fetch all necessary addressing information required for correct PRCMU initialisation from the Device Tree instead of using hard-coded values. CC: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> --- arch/arm/boot/dts/db8500.dtsi | 8 +++++++- arch/arm/mach-ux500/timer.c | 24 ++++++++++++++++++++++++ 2 files changed, 31 insertions(+), 1 deletions(-)