diff mbox series

[RFC,v2,8/8] ACPI: APEI: EINJ: Update the documentation for EINJv2 support

Message ID 20240521211036.227674-9-zaidal@os.amperecomputing.com
State New
Headers show
Series Enable EINJv2 support | expand

Commit Message

Zaid Alali May 21, 2024, 9:10 p.m. UTC 
Add documentation for the updated ACPI specs for EINJv2(1)(2)

(1)https://bugzilla.tianocore.org/show_bug.cgi?id=4615
(2)https://bugzilla.tianocore.org/attachment.cgi?id=1446

Signed-off-by: Zaid Alali <zaidal@os.amperecomputing.com>
---
 .../firmware-guide/acpi/apei/einj.rst         | 51 +++++++++++++++++--
 1 file changed, 48 insertions(+), 3 deletions(-)

Comments

Ben Cheatham May 22, 2024, 4:50 p.m. UTC | #1 
On 5/21/24 4:10 PM, Zaid Alali wrote:
> Add documentation for the updated ACPI specs for EINJv2(1)(2)
> 
> (1)https://bugzilla.tianocore.org/show_bug.cgi?id=4615
> (2)https://bugzilla.tianocore.org/attachment.cgi?id=1446
> 
> Signed-off-by: Zaid Alali <zaidal@os.amperecomputing.com>
> ---
>  .../firmware-guide/acpi/apei/einj.rst         | 51 +++++++++++++++++--
>  1 file changed, 48 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/firmware-guide/acpi/apei/einj.rst b/Documentation/firmware-guide/acpi/apei/einj.rst
> index c52b9da08fa9..f2751cee9698 100644
> --- a/Documentation/firmware-guide/acpi/apei/einj.rst
> +++ b/Documentation/firmware-guide/acpi/apei/einj.rst
> @@ -61,8 +61,18 @@ The following files belong to it:
>    0x00000800        Platform Uncorrectable fatal
>    ================  ===================================
>  
> +  ================  ===================================
> +  Error Type Value      Error Description
> +  ================  ===================================
> +  0x00000001        EINJV2 Processor Error
> +  0x00000002        EINJV2 Memory Error
> +  0x00000004        EINJV2 PCI Express Error
> +  ================  ===================================
> +
>    The format of the file contents are as above, except present are only
> -  the available error types.
> +  the available error types. The available Error types are discovered by
> +  calling GET_ERROR_TYPE command, and if bit 30 is set in the returned
> +  value, then EINJv2 is supported by the system.
>  

I think this is a little too much information. I don't think it's really relevant
to how the available error types are determined since the raw value returned from
GET_ERROR_TYPE isn't user visible.

Thanks,
Ben

>  - error_type
>  
> @@ -85,9 +95,11 @@ The following files belong to it:
>      Bit 0
>        Processor APIC field valid (see param3 below).
>      Bit 1
> -      Memory address and mask valid (param1 and param2).
> +      Memory address and range valid (param1 and param2).
>      Bit 2
>        PCIe (seg,bus,dev,fn) valid (see param4 below).
> +    Bit 3
> +      EINJv2 extension structure is valid
>  
>    If set to zero, legacy behavior is mimicked where the type of
>    injection specifies just one bit set, and param1 is multiplexed.
> @@ -110,6 +122,7 @@ The following files belong to it:
>    Used when the 0x1 bit is set in "flags" to specify the APIC id
>  
>  - param4
> +
>    Used when the 0x4 bit is set in "flags" to specify target PCIe device
>  
>  - notrigger
> @@ -122,6 +135,18 @@ The following files belong to it:
>    this actually works depends on what operations the BIOS actually
>    includes in the trigger phase.
>  
> +- einjv2_component_count
> +
> +  The value from this file is used to set the "Component Array Count"
> +  field of EINJv2 Extension Structure.
> +
> +- einjv2_component_array
> +
> +  The contents of this file are used to set the "Component Array" field
> +  of the EINJv2 Extension Structure. The expected format is hex values
> +  for component id and syndrome separated by space, and multiple
> +  components are separated by new line.
> +
>  CXL error types are supported from ACPI 6.5 onwards (given a CXL port
>  is present). The EINJ user interface for CXL error types is at
>  <debugfs mount point>/cxl. The following files belong to it:
> @@ -139,7 +164,6 @@ is present). The EINJ user interface for CXL error types is at
>    under <debugfs mount point>/apei/einj, while CXL 1.1/1.0 port injections
>    must use this file.
>  
> -
>  BIOS versions based on the ACPI 4.0 specification have limited options
>  in controlling where the errors are injected. Your BIOS may support an
>  extension (enabled with the param_extension=1 module parameter, or boot
> @@ -194,6 +218,27 @@ An error injection example::
>    # echo 0x8 > error_type			# Choose correctable memory error
>    # echo 1 > error_inject			# Inject now
>  
> +An EINJv2 error injection example::
> +
> +  # cd /sys/kernel/debug/apei/einj
> +  # cat available_error_type            # See which errors can be injected
> +  0x00000002    Processor Uncorrectable non-fatal
> +  0x00000008    Memory Correctable
> +  0x00000010    Memory Uncorrectable non-fatal
> +  ==================
> +  0x00000001        EINJV2 Processor Error
> +  0x00000002        EINJV2 Memory Error
> +
> +  # echo 0x12345000 > param1            	# Set memory address for injection
> +  # echo 0xfffffffffffff000 > param2            # Range - anywhere in this page
> +  # comp_arr="0x1 0x2				# Fill in the component array
> +    >0x1 0x4
> +    >0x2 0x4"
> +  # echo "$comp_arr" > einjv2_component_array
> +  # echo 0x2 > error_type                       # Choose EINJv2 memory error
> +  # echo 0xa > flags				# set flags to indicate EINJv2
> +  # echo 1 > error_inject                       # Inject now
> +
>  You should see something like this in dmesg::
>  
>    [22715.830801] EDAC sbridge MC3: HANDLING MCE MEMORY ERROR
diff mbox series

Patch

diff --git a/Documentation/firmware-guide/acpi/apei/einj.rst b/Documentation/firmware-guide/acpi/apei/einj.rst
index c52b9da08fa9..f2751cee9698 100644
--- a/Documentation/firmware-guide/acpi/apei/einj.rst
+++ b/Documentation/firmware-guide/acpi/apei/einj.rst
@@ -61,8 +61,18 @@  The following files belong to it:
   0x00000800        Platform Uncorrectable fatal
   ================  ===================================
 
+  ================  ===================================
+  Error Type Value      Error Description
+  ================  ===================================
+  0x00000001        EINJV2 Processor Error
+  0x00000002        EINJV2 Memory Error
+  0x00000004        EINJV2 PCI Express Error
+  ================  ===================================
+
   The format of the file contents are as above, except present are only
-  the available error types.
+  the available error types. The available Error types are discovered by
+  calling GET_ERROR_TYPE command, and if bit 30 is set in the returned
+  value, then EINJv2 is supported by the system.
 
 - error_type
 
@@ -85,9 +95,11 @@  The following files belong to it:
     Bit 0
       Processor APIC field valid (see param3 below).
     Bit 1
-      Memory address and mask valid (param1 and param2).
+      Memory address and range valid (param1 and param2).
     Bit 2
       PCIe (seg,bus,dev,fn) valid (see param4 below).
+    Bit 3
+      EINJv2 extension structure is valid
 
   If set to zero, legacy behavior is mimicked where the type of
   injection specifies just one bit set, and param1 is multiplexed.
@@ -110,6 +122,7 @@  The following files belong to it:
   Used when the 0x1 bit is set in "flags" to specify the APIC id
 
 - param4
+
   Used when the 0x4 bit is set in "flags" to specify target PCIe device
 
 - notrigger
@@ -122,6 +135,18 @@  The following files belong to it:
   this actually works depends on what operations the BIOS actually
   includes in the trigger phase.
 
+- einjv2_component_count
+
+  The value from this file is used to set the "Component Array Count"
+  field of EINJv2 Extension Structure.
+
+- einjv2_component_array
+
+  The contents of this file are used to set the "Component Array" field
+  of the EINJv2 Extension Structure. The expected format is hex values
+  for component id and syndrome separated by space, and multiple
+  components are separated by new line.
+
 CXL error types are supported from ACPI 6.5 onwards (given a CXL port
 is present). The EINJ user interface for CXL error types is at
 <debugfs mount point>/cxl. The following files belong to it:
@@ -139,7 +164,6 @@  is present). The EINJ user interface for CXL error types is at
   under <debugfs mount point>/apei/einj, while CXL 1.1/1.0 port injections
   must use this file.
 
-
 BIOS versions based on the ACPI 4.0 specification have limited options
 in controlling where the errors are injected. Your BIOS may support an
 extension (enabled with the param_extension=1 module parameter, or boot
@@ -194,6 +218,27 @@  An error injection example::
   # echo 0x8 > error_type			# Choose correctable memory error
   # echo 1 > error_inject			# Inject now
 
+An EINJv2 error injection example::
+
+  # cd /sys/kernel/debug/apei/einj
+  # cat available_error_type            # See which errors can be injected
+  0x00000002    Processor Uncorrectable non-fatal
+  0x00000008    Memory Correctable
+  0x00000010    Memory Uncorrectable non-fatal
+  ==================
+  0x00000001        EINJV2 Processor Error
+  0x00000002        EINJV2 Memory Error
+
+  # echo 0x12345000 > param1            	# Set memory address for injection
+  # echo 0xfffffffffffff000 > param2            # Range - anywhere in this page
+  # comp_arr="0x1 0x2				# Fill in the component array
+    >0x1 0x4
+    >0x2 0x4"
+  # echo "$comp_arr" > einjv2_component_array
+  # echo 0x2 > error_type                       # Choose EINJv2 memory error
+  # echo 0xa > flags				# set flags to indicate EINJv2
+  # echo 1 > error_inject                       # Inject now
+
 You should see something like this in dmesg::
 
   [22715.830801] EDAC sbridge MC3: HANDLING MCE MEMORY ERROR