| Message ID | 20240607-tlv320adc3xxx-micbias-gpo-v3-1-59dbec8b98f4@axis.com |
|---|---|
| State | Accepted |
| Commit | 4e617f0cb2dd9675a3b2707c10d89f0f5303ad1e |
| Headers | show |
| Series | tlv320adc3xxx: Allow MICBIAS pins to be used as GPOs | expand |
On 07/06/2024 17:22, Ricard Wanderlof wrote: > Add properties for configuring the MICBIAS pins as general purpose > outputs, with some limitations: The voltage on the pin when activated > may be set using another property to 2.0 V, 2.5 V or AVDD. > When deactivated the pin will float. > > Signed-off-by: Ricard Wanderlof <ricard.wanderlof@axis.com> > --- Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- <form letter> This is an automated instruction, just in case, because many review tags are being ignored. If you know the process, you can skip it (please do not feel offended by me posting it here - no bad intentions intended). If you do not know the process, here is a short explanation: Please add Acked-by/Reviewed-by/Tested-by tags when posting new versions, under or above your Signed-off-by tag. Tag is "received", when provided in a message replied to you on the mailing list. Tools like b4 can help here. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for tags received on the version they apply. https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577 </form letter> Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml index ede14ca2c07a..1a6c6877b2f7 100644 --- a/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml @@ -82,6 +82,26 @@ properties: Note that there is currently no support for reading the GPIO pins as inputs. + ti,micbias1-gpo: + type: boolean + description: | + When set, the MICBIAS1 pin may be controlled via the GPIO framework, + as pin number 3 on the device. + + In this mode, when the pin is activated, it will be set to the voltage + specified by the ti,micbias1-vg property. When deactivated, the pin will + float. + + ti,micbias2-gpo: + type: boolean + description: | + When set, the MICBIAS2 pin may be controlled via the GPIO framework, + as pin number 4 on the device. + + In this mode, when the pin is activated, it will be set to the voltage + specified by the ti,micbias2-vg property. When deactivated, the pin will + float. + ti,micbias1-vg: $ref: /schemas/types.yaml#/definitions/uint32 enum: @@ -104,6 +124,10 @@ properties: description: | Mic bias voltage output on MICBIAS2 pin +dependencies: + ti,micbias1-gpo: ['ti,micbias1-vg'] + ti,micbias2-gpo: ['ti,micbias2-vg'] + required: - compatible - reg
Add properties for configuring the MICBIAS pins as general purpose outputs, with some limitations: The voltage on the pin when activated may be set using another property to 2.0 V, 2.5 V or AVDD. When deactivated the pin will float. Signed-off-by: Ricard Wanderlof <ricard.wanderlof@axis.com> --- .../bindings/sound/ti,tlv320adc3xxx.yaml | 24 ++++++++++++++++++++++ 1 file changed, 24 insertions(+)