@@ -21,7 +21,6 @@
#include "leds-lp55xx-common.h"
-#define LP5523_PROGRAM_LENGTH 32 /* bytes */
/* Memory is used like this:
* 0x00 engine 1 program
* 0x10 engine 2 program
@@ -172,7 +171,7 @@ static int lp5523_init_program_engine(struct lp55xx_chip *chip)
int ret;
u8 status;
/* one pattern per engine setting LED MUX start and stop addresses */
- static const u8 pattern[][LP5523_PROGRAM_LENGTH] = {
+ static const u8 pattern[][LP55xx_BYTES_PER_PAGE] = {
{ 0x9c, 0x30, 0x9c, 0xb0, 0x9d, 0x80, 0xd8, 0x00, 0},
{ 0x9c, 0x40, 0x9c, 0xc0, 0x9d, 0x80, 0xd8, 0x00, 0},
{ 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0},
@@ -196,7 +195,7 @@ static int lp5523_init_program_engine(struct lp55xx_chip *chip)
chip->engine_idx = i;
lp55xx_load_engine(chip);
- for (j = 0; j < LP5523_PROGRAM_LENGTH; j++) {
+ for (j = 0; j < LP55xx_BYTES_PER_PAGE; j++) {
ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + j,
pattern[i - 1][j]);
if (ret)
@@ -19,7 +19,6 @@
#include "leds-lp55xx-common.h"
-#define LP5562_PROGRAM_LENGTH 32
#define LP5562_MAX_LEDS 4
/* ENABLE Register 00h */
@@ -212,9 +211,9 @@ static void lp5562_write_program_memory(struct lp55xx_chip *chip,
/* check the size of program count */
static inline bool _is_pc_overflow(struct lp55xx_predef_pattern *ptn)
{
- return ptn->size_r >= LP5562_PROGRAM_LENGTH ||
- ptn->size_g >= LP5562_PROGRAM_LENGTH ||
- ptn->size_b >= LP5562_PROGRAM_LENGTH;
+ return ptn->size_r >= LP55xx_BYTES_PER_PAGE ||
+ ptn->size_g >= LP55xx_BYTES_PER_PAGE ||
+ ptn->size_b >= LP55xx_BYTES_PER_PAGE;
}
static int lp5562_run_predef_led_pattern(struct lp55xx_chip *chip, int mode)
@@ -26,7 +26,8 @@
/* OP MODE require at least 153 us to clear regs */
#define LP55XX_CMD_SLEEP 200
-#define LP55xx_PROGRAM_LENGTH 32
+#define LP55xx_PROGRAM_PAGES 16
+#define LP55xx_MAX_PROGRAM_LENGTH (LP55xx_BYTES_PER_PAGE * 4) /* 128 bytes (4 pages) */
/*
* Program Memory Operations
@@ -172,12 +173,16 @@ int lp55xx_update_program_memory(struct lp55xx_chip *chip,
{
enum lp55xx_engine_index idx = chip->engine_idx;
const struct lp55xx_device_config *cfg = chip->cfg;
- u8 pattern[LP55xx_PROGRAM_LENGTH] = { };
+ u8 pattern[LP55xx_MAX_PROGRAM_LENGTH] = { };
u8 start_addr = cfg->prog_mem_base.addr;
- int i = 0, offset = 0;
- int ret;
+ int page, i = 0, offset = 0;
+ int program_length, ret;
+
+ program_length = LP55xx_BYTES_PER_PAGE;
+ if (cfg->pages_per_engine)
+ program_length *= cfg->pages_per_engine;
- while ((offset < size - 1) && (i < LP55xx_PROGRAM_LENGTH)) {
+ while ((offset < size - 1) && (i < program_length)) {
unsigned int cmd;
int nrchars;
char c[3];
@@ -206,12 +211,20 @@ int lp55xx_update_program_memory(struct lp55xx_chip *chip,
* For LED chip that support page, PAGE is already set in load_engine.
*/
if (!cfg->pages_per_engine)
- start_addr += LP55xx_PROGRAM_LENGTH * idx;
+ start_addr += LP55xx_BYTES_PER_PAGE * idx;
- for (i = 0; i < LP55xx_PROGRAM_LENGTH; i++) {
- ret = lp55xx_write(chip, start_addr + i, pattern[i]);
- if (ret)
- return -EINVAL;
+ for (page = 0; page < program_length / LP55xx_BYTES_PER_PAGE; page++) {
+ /* Write to the next page each 32 bytes (if supported) */
+ if (cfg->pages_per_engine)
+ lp55xx_write(chip, LP55xx_REG_PROG_PAGE_SEL,
+ LP55xx_PAGE_OFFSET(idx, cfg->pages_per_engine) + page);
+
+ for (i = 0; i < LP55xx_BYTES_PER_PAGE; i++) {
+ ret = lp55xx_write(chip, start_addr + i,
+ pattern[i + (page * LP55xx_BYTES_PER_PAGE)]);
+ if (ret)
+ return -EINVAL;
+ }
}
return size;
@@ -224,13 +237,19 @@ EXPORT_SYMBOL_GPL(lp55xx_update_program_memory);
void lp55xx_firmware_loaded_cb(struct lp55xx_chip *chip)
{
+ const struct lp55xx_device_config *cfg = chip->cfg;
const struct firmware *fw = chip->fw;
+ int program_length;
+
+ program_length = LP55xx_BYTES_PER_PAGE;
+ if (cfg->pages_per_engine)
+ program_length *= cfg->pages_per_engine;
/*
* the firmware is encoded in ascii hex character, with 2 chars
* per byte
*/
- if (fw->size > LP55xx_PROGRAM_LENGTH * 2) {
+ if (fw->size > program_length * 2) {
dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n",
fw->size);
return;
@@ -1281,7 +1300,7 @@ static struct lp55xx_platform_data *lp55xx_of_populate_pdata(struct device *dev,
int lp55xx_probe(struct i2c_client *client)
{
const struct i2c_device_id *id = i2c_client_get_device_id(client);
- int ret;
+ int program_length, ret;
struct lp55xx_chip *chip;
struct lp55xx_led *led;
struct lp55xx_platform_data *pdata = dev_get_platdata(&client->dev);
@@ -1305,6 +1324,17 @@ int lp55xx_probe(struct i2c_client *client)
}
}
+ /* Validate max program page */
+ program_length = LP55xx_BYTES_PER_PAGE;
+ if (chip->cfg->pages_per_engine)
+ program_length *= chip->cfg->pages_per_engine;
+
+ /* support a max of 128bytes */
+ if (program_length > LP55xx_MAX_PROGRAM_LENGTH) {
+ dev_err(&client->dev, "invalid pages_per_engine configured\n");
+ return -EINVAL;
+ }
+
led = devm_kcalloc(&client->dev,
pdata->num_channels, sizeof(*led), GFP_KERNEL);
if (!led)
@@ -14,6 +14,8 @@
#include <linux/led-class-multicolor.h>
+#define LP55xx_BYTES_PER_PAGE 32 /* bytes */
+
enum lp55xx_engine_index {
LP55XX_ENGINE_INVALID,
LP55XX_ENGINE_1,
Some LED chip supports up to 16 pages and with some magic they can be divided in 4 page for each ENGINE + 1 for each MUX. Following this we can support bigger programs up to 128 bytes. Rework the update_program_memory function to support program of multiple pages instead of hardcoding it to one page per programs. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> --- drivers/leds/leds-lp5523.c | 5 ++- drivers/leds/leds-lp5562.c | 7 ++-- drivers/leds/leds-lp55xx-common.c | 54 ++++++++++++++++++++++++------- drivers/leds/leds-lp55xx-common.h | 2 ++ 4 files changed, 49 insertions(+), 19 deletions(-)