diff mbox series

[v4,1/2] dt-bindings: pinctrl: aspeed,ast2600-pinctrl: add NCSI groups

Message ID 20240621093142.698529-2-potin.lai.pt@gmail.com
State Accepted
Commit 49b2b5c39e10fd442b89844ae6a510a207c0c8c9
Headers show
Series [v4,1/2] dt-bindings: pinctrl: aspeed,ast2600-pinctrl: add NCSI groups | expand

Commit Message

Potin Lai June 21, 2024, 9:31 a.m. UTC 
In the NCSI pin table, the reference clock output pin (RMIIXRCLKO) is not
needed on the management controller side.

Add "NCSI" pin groups that are equivalent to the RMII pin groups, but
without the RMIIXRCLKO pin.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
---
 .../bindings/pinctrl/aspeed,ast2600-pinctrl.yaml           | 7 +++++++
 1 file changed, 7 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
index 00b6974a5ed3d..80974c46f3ef9 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@@ -19,6 +19,11 @@  description: |+
   Refer to the bindings described in
   Documentation/devicetree/bindings/mfd/syscon.yaml
 
+  Note: According to the NCSI specification, the reference clock output pin
+  (RMIIXRCLKO) is not required on the management controller side. To optimize
+  pin usage, add "NCSI" pin groups that are equivalent to the RMII pin groups,
+  but without the RMIIXRCLKO pin.
+
 properties:
   compatible:
     const: aspeed,ast2600-pinctrl
@@ -337,6 +342,8 @@  additionalProperties:
         - MDIO2
         - MDIO3
         - MDIO4
+        - NCSI3
+        - NCSI4
         - NCTS1
         - NCTS2
         - NCTS3