[v2,2/2] mmc: sdhci-of-ma35d1: Add Nuvoton MA35D1 SDHCI driver

Add the SDHCI driver for the MA35D1 platform. It is based upon the
SDHCI interface, but requires some extra initialization.

Signed-off-by: Shan-Chun Hung <shanchun1218@gmail.com>
---
 drivers/mmc/host/Kconfig           |  14 ++
 drivers/mmc/host/Makefile          |   1 +
 drivers/mmc/host/sdhci-of-ma35d1.c | 291 +++++++++++++++++++++++++++++
 3 files changed, 306 insertions(+)
 create mode 100644 drivers/mmc/host/sdhci-of-ma35d1.c

--
2.25.1

Dear Adrian,

Thanks for your review.

On 2024/6/27 下午 05:40, Adrian Hunter wrote:
> On 26/06/24 12:49, Shan-Chun Hung wrote:
>> Add the SDHCI driver for the MA35D1 platform. It is based upon the
>> SDHCI interface, but requires some extra initialization.
>>
>> Signed-off-by: Shan-Chun Hung <shanchun1218@gmail.com>
>> ---
>>   drivers/mmc/host/Kconfig           |  14 ++
>>   drivers/mmc/host/Makefile          |   1 +
>>   drivers/mmc/host/sdhci-of-ma35d1.c | 291 +++++++++++++++++++++++++++++
>>   3 files changed, 306 insertions(+)
>>   create mode 100644 drivers/mmc/host/sdhci-of-ma35d1.c
>>
>> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
>> index bb0d4fb0892a..31cd076e1c53 100644
>> --- a/drivers/mmc/host/Kconfig
>> +++ b/drivers/mmc/host/Kconfig
>> @@ -252,6 +252,20 @@ config MMC_SDHCI_OF_SPARX5
>>
> Patch did not apply cleanly:
>
> Applying: mmc: sdhci-of-ma35d1: Add Nuvoton MA35D1 SDHCI driver
> error: corrupt patch at line 14
> Patch failed at 0001 mmc: sdhci-of-ma35d1: Add Nuvoton MA35D1 SDHCI driver
I will fix it.
>> 	  If unsure, say N.
>>
>> +config MMC_SDHCI_OF_MA35D1
>> +	tristate "SDHCI OF support for the MA35D1 SDHCI controller"
>> +	depends on ARCH_MA35
> Does this dependency serve a purpose?  At least add COMPILE_TEST
>
> 	depends on ARCH_MA35 || COMPILE_TEST
I will modify "depends on ARCH_MA35 || COMPILE_TEST"
>> +	depends on MMC_SDHCI_PLTFM
>> +	depends on COMMON_CLK
>> +	depends on OF || COMPILE_TEST
>> +	help
>> +	  This selects the MA35D1 Secure Digital Host Controller Interface.
>> +
>> +	  If you have a controller with this interface, say Y or M here. You
>> +	  also need to enable an appropriate bus interface.
>> +
>> +	  If unsure, say N.
>> +
>>   config MMC_SDHCI_CADENCE
>> 	tristate "SDHCI support for the Cadence SD/SDIO/eMMC controller"
>> 	depends on MMC_SDHCI_PLTFM
>> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
>> index f53f86d200ac..3ccffebbe59b 100644
>> --- a/drivers/mmc/host/Makefile
>> +++ b/drivers/mmc/host/Makefile
>> @@ -88,6 +88,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_ESDHC)	+= sdhci-of-esdhc.o
>>   obj-$(CONFIG_MMC_SDHCI_OF_HLWD)		+= sdhci-of-hlwd.o
>>   obj-$(CONFIG_MMC_SDHCI_OF_DWCMSHC)	+= sdhci-of-dwcmshc.o
>>   obj-$(CONFIG_MMC_SDHCI_OF_SPARX5)	+= sdhci-of-sparx5.o
>> +obj-$(CONFIG_MMC_SDHCI_OF_MA35D1)	+= sdhci-of-ma35d1.o
>>   obj-$(CONFIG_MMC_SDHCI_BCM_KONA)	+= sdhci-bcm-kona.o
>>   obj-$(CONFIG_MMC_SDHCI_IPROC)		+= sdhci-iproc.o
>>   obj-$(CONFIG_MMC_SDHCI_NPCM)		+= sdhci-npcm.o
>> diff --git a/drivers/mmc/host/sdhci-of-ma35d1.c b/drivers/mmc/host/sdhci-of-ma35d1.c
>> new file mode 100644
>> index 000000000000..e260aeb12d7f
>> --- /dev/null
>> +++ b/drivers/mmc/host/sdhci-of-ma35d1.c
>> @@ -0,0 +1,291 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) 2024 Nuvoton Technology Corp.
>> + *
>> + * Author: Shan-Chun Hung <shanchun1218@gmail.com>
>> + */
>> +
>> +#include <linux/align.h>
>> +#include <linux/array_size.h>
>> +#include <linux/bits.h>
>> +#include <linux/build_bug.h>
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/dev_printk.h>
>> +#include <linux/device.h>
>> +#include <linux/dma-mapping.h>
>> +#include <linux/err.h>
>> +#include <linux/math.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/minmax.h>
>> +#include <linux/mmc/card.h>
>> +#include <linux/mmc/host.h>
>> +#include <linux/mod_devicetable.h>
>> +#include <linux/module.h>
>> +#include <linux/pinctrl/consumer.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/regmap.h>
>> +#include <linux/reset.h>
>> +#include <linux/sizes.h>
>> +#include <linux/types.h>
>> +
>> +#include "sdhci-pltfm.h"
>> +#include "sdhci.h"
>> +
>> +#define MA35_SYS_MISCFCR0	0x070
>> +#define MA35_SDHCI_MSHCCTL	0x508
>> +#define MA35_SDHCI_MBIUCTL	0x510
>> +
>> +#define MA35_SDHCI_CMD_CONFLICT_CHK	BIT(0)
>> +#define MA35_SDHCI_INCR_MSK		GENMASK(3, 0)
>> +#define MA35_SDHCI_INCR16		BIT(3)
>> +#define MA35_SDHCI_INCR8		BIT(2)
>> +
>> +struct ma35_priv {
>> +	struct regmap		*regmap;
>> +	struct reset_control	*rst;
>> +	struct pinctrl		*pinctrl;
>> +	struct pinctrl_state	*pins_uhs;
>> +	struct pinctrl_state	*pins_default;
>> +};
>> +
>> +struct ma35_restore_data {
>> +	u32	reg;
>> +	u32	width;
>> +};
>> +
>> +static const struct ma35_restore_data restore_data[] = {
>> +	{ SDHCI_CLOCK_CONTROL,		sizeof(u32)},
>> +	{ SDHCI_BLOCK_SIZE,		sizeof(u32)},
>> +	{ SDHCI_INT_ENABLE,		sizeof(u32)},
>> +	{ SDHCI_SIGNAL_ENABLE,		sizeof(u32)},
>> +	{ SDHCI_AUTO_CMD_STATUS,	sizeof(u32)},
>> +	{ SDHCI_HOST_CONTROL,		sizeof(u32)},
>> +	{ SDHCI_TIMEOUT_CONTROL,	sizeof(u8) },
>> +	{ MA35_SDHCI_MSHCCTL,		sizeof(u16)},
>> +	{ MA35_SDHCI_MBIUCTL,		sizeof(u16)},
>> +};
>> +
>> +/*
>> + * If DMA addr spans 128MB boundary, we split the DMA transfer into two
>> + * so that each DMA transfer doesn't exceed the boundary.
>> + */
>> +static void ma35_adma_write_desc(struct sdhci_host *host, void **desc,
>> +				  dma_addr_t addr, int len, unsigned int cmd)
> Please take a look at checkpatch --strict output.  Fixing "Alignment" and
> "spaces preferred around" CHECKs tends to make the code look better.
I will fix it.
>> +{
>> +	int tmplen, offset;
>> +
>> +	if (likely(!len || (ALIGN(addr, SZ_128M) == ALIGN(addr+len-1, SZ_128M)))) {
>> +		sdhci_adma_write_desc(host, desc, addr, len, cmd);
>> +		return;
>> +	}
>> +
>> +	offset = addr & (SZ_128M - 1);
>> +	tmplen = SZ_128M - offset;
>> +	sdhci_adma_write_desc(host, desc, addr, tmplen, cmd);
>> +
>> +	addr += tmplen;
>> +	len -= tmplen;
>> +	sdhci_adma_write_desc(host, desc, addr, len, cmd);
>> +}
>> +
>> +static void ma35_set_clock(struct sdhci_host *host, unsigned int clock)
>> +{
>> +	u32 ctl;
>> +
>> +	/* If the clock frequency exceeds MMC_HIGH_52_MAX_DTR,
>> +	 * disable command conflict check.
>> +	 */
> Please use the following style for multi-line comments:
>
> 	/*
> 	 * If the clock frequency exceeds MMC_HIGH_52_MAX_DTR,
> 	 * disable command conflict check.
> 	 */
I will fix it.
>> +	ctl = sdhci_readw(host, MA35_SDHCI_MSHCCTL);
>> +	if (clock > MMC_HIGH_52_MAX_DTR)
>> +		ctl &= ~MA35_SDHCI_CMD_CONFLICT_CHK;
>> +	else
>> +		ctl |= MA35_SDHCI_CMD_CONFLICT_CHK;
>> +	sdhci_writew(host, ctl, MA35_SDHCI_MSHCCTL);
>> +
>> +	sdhci_set_clock(host, clock);
>> +}
>> +
>> +static int ma35_start_signal_voltage_switch(struct mmc_host *mmc,
>> +					      struct mmc_ios *ios)
>> +{
>> +	struct sdhci_host *host = mmc_priv(mmc);
>> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>> +	struct ma35_priv *priv = sdhci_pltfm_priv(pltfm_host);
>> +
>> +	switch (ios->signal_voltage) {
>> +	case MMC_SIGNAL_VOLTAGE_180:
>> +		if (!IS_ERR(priv->pinctrl) && !IS_ERR(priv->pins_uhs))
>> +			pinctrl_select_state(priv->pinctrl, priv->pins_uhs);
>> +		break;
>> +	case MMC_SIGNAL_VOLTAGE_330:
>> +		if (!IS_ERR(priv->pinctrl) && !IS_ERR(priv->pins_default))
>> +			pinctrl_select_state(priv->pinctrl, priv->pins_default);
>> +		break;
>> +	default:
>> +		dev_err(mmc_dev(host->mmc), "Unsupported signal voltage!\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	return sdhci_start_signal_voltage_switch(mmc, ios);
>> +}
>> +
>> +static void ma35_voltage_switch(struct sdhci_host *host)
>> +{
>> +	/* Wait for 5ms after set 1.8V signal enable bit */
>> +	fsleep(5000);
>> +}
>> +
>> +static int ma35_execute_tuning(struct mmc_host *mmc, u32 opcode)
>> +{
>> +	struct sdhci_host *host = mmc_priv(mmc);
>> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>> +	struct ma35_priv *priv = sdhci_pltfm_priv(pltfm_host);
>> +	int idx;
>> +	u32 regs[ARRAY_SIZE(restore_data)] = { };
>> +
>> +	/* Limitations require a reset of SD/eMMC before tuning and
>> +	 * saving the registers before resetting, then restoring
>> +	 * after the reset.
>> +	 */
> Please use the following style for multi-line comments:
>
> 	/*
> 	 * Limitations require a reset of SD/eMMC before tuning and
> 	 * saving the registers before resetting, then restoring
> 	 * after the reset.
> 	 */
I will fix it.
>> +	for (idx = 0; idx < ARRAY_SIZE(restore_data); idx++) {
>> +		if (restore_data[idx].width == sizeof(u32))
>> +			regs[idx] = sdhci_readl(host, restore_data[idx].reg);
>> +		else if (restore_data[idx].width == sizeof(u16))
>> +			regs[idx] = sdhci_readw(host, restore_data[idx].reg);
>> +		else if (restore_data[idx].width == sizeof(u8))
>> +			regs[idx] = sdhci_readb(host, restore_data[idx].reg);
>> +	}
>> +
>> +	reset_control_assert(priv->rst);
>> +	reset_control_deassert(priv->rst);
>> +
>> +	for (idx = 0; idx < ARRAY_SIZE(restore_data); idx++) {
>> +		if (restore_data[idx].width == sizeof(u32))
>> +			sdhci_writel(host, regs[idx], restore_data[idx].reg);
>> +		else if (restore_data[idx].width == sizeof(u16))
>> +			sdhci_writew(host, regs[idx], restore_data[idx].reg);
>> +		else if (restore_data[idx].width == sizeof(u8))
>> +			sdhci_writeb(host, regs[idx], restore_data[idx].reg);
>> +	}
>> +
>> +	return sdhci_execute_tuning(mmc, opcode);
>> +}
>> +
>> +static const struct sdhci_ops sdhci_ma35_ops = {
>> +	.set_clock		= ma35_set_clock,
>> +	.set_bus_width		= sdhci_set_bus_width,
>> +	.set_uhs_signaling	= sdhci_set_uhs_signaling,
>> +	.get_max_clock		= sdhci_pltfm_clk_get_max_clock,
>> +	.reset			= sdhci_reset,
>> +	.adma_write_desc	= ma35_adma_write_desc,
>> +	.voltage_switch	= ma35_voltage_switch,
> Last one does not line up
I will fix it
>> +};
>> +
>> +static const struct sdhci_pltfm_data sdhci_ma35_pdata = {
>> +	.ops = &sdhci_ma35_ops,
>> +	.quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
>> +	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | SDHCI_QUIRK2_BROKEN_DDR50 |
>> +		   SDHCI_QUIRK2_ACMD23_BROKEN,
>> +};
>> +
>> +static void ma35_sdhci_pltfm_free(void *data)
>> +{
>> +	sdhci_pltfm_free(data);
>> +}
>> +
>> +static int ma35_probe(struct platform_device *pdev)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	struct sdhci_pltfm_host *pltfm_host;
>> +	struct sdhci_host *host;
>> +	struct ma35_priv *priv;
>> +	int err;
>> +	u32 extra, ctl;
>> +
>> +	host = sdhci_pltfm_init(pdev, &sdhci_ma35_pdata, sizeof(struct ma35_priv));
>> +	if (IS_ERR(host))
>> +		return PTR_ERR(host);
>> +
>> +	err = devm_add_action_or_reset(dev, ma35_sdhci_pltfm_free, pdev);
> This just looks like it is going to call sdhci_pltfm_free()
> for a second time after it is called by sdhci_pltfm_remove()

During the testing process, we only simulated the scenario where 
ma35_probe() returned an error.

We overlooked the fact that sdhci_pltfm_remove would also be called when 
ma35_probe() succeeds.

This issue was confirmed through testing using the module method. I will 
fix it.

>> +	if (err)
>> +		return dev_err_probe(dev, err, "Failed to register sdhci_pltfm_free action\n");
>> +
>> +	/* Extra adma table cnt for cross 128M boundary handling. */
>> +	extra = DIV_ROUND_UP_ULL(dma_get_required_mask(dev), SZ_128M);
>> +	extra = min(extra, SDHCI_MAX_SEGS);
>> +
>> +	host->adma_table_cnt += extra;
>> +	pltfm_host = sdhci_priv(host);
>> +	priv = sdhci_pltfm_priv(pltfm_host);
>> +
>> +	pltfm_host->clk = devm_clk_get_optional_enabled(dev, NULL);
>> +	if (IS_ERR(pltfm_host->clk))
>> +		return dev_err_probe(dev, IS_ERR(pltfm_host->clk), "failed to get clk\n");
>> +
>> +	err = mmc_of_parse(host->mmc);
>> +	if (err)
>> +		return err;
>> +
>> +	priv->rst = devm_reset_control_get_exclusive(dev, NULL);
>> +	if (IS_ERR(priv->rst))
>> +		return dev_err_probe(dev, PTR_ERR(priv->rst), "failed to get reset control\n");
>> +
>> +	sdhci_get_of_property(pdev);
>> +
>> +	priv->pinctrl = devm_pinctrl_get(dev);
>> +	if (!IS_ERR(priv->pinctrl)) {
>> +		priv->pins_default = pinctrl_lookup_state(priv->pinctrl, "default");
>> +		priv->pins_uhs = pinctrl_lookup_state(priv->pinctrl, "state_uhs");
>> +		pinctrl_select_state(priv->pinctrl, priv->pins_default);
>> +	}
>> +
>> +	if (!(host->quirks2 & SDHCI_QUIRK2_NO_1_8_V)) {
>> +		u32 reg;
>> +
>> +		priv->regmap = syscon_regmap_lookup_by_phandle(dev_of_node(dev), "nuvoton,sys");
>> +
>> +		if (!IS_ERR(priv->regmap)) {
>> +			/* Enable SDHCI voltage stable for 1.8V */
>> +			regmap_read(priv->regmap, MA35_SYS_MISCFCR0, &reg);
>> +			reg |= BIT(17);
>> +			regmap_write(priv->regmap, MA35_SYS_MISCFCR0, reg);
>> +		}
>> +
>> +		host->mmc_host_ops.start_signal_voltage_switch =
>> +					ma35_start_signal_voltage_switch;
>> +	}
>> +
>> +	host->mmc_host_ops.execute_tuning = ma35_execute_tuning;
>> +
>> +	err = sdhci_add_host(host);
>> +	if (err)
>> +		return err;
>> +
>> +	/* Enable INCR16 and INCR8 */
> Comment would be more useful if it said what INCR16 and
> INCR8 are

I will modify as follows:

/*
  * Split data into chunks of 16 or 8 bytes for sending.
  * Each chunk transfer is guaranteed to be uninterrupted on the bus.
  */

>> +	ctl = sdhci_readw(host, MA35_SDHCI_MBIUCTL);
>> +	ctl &= ~MA35_SDHCI_INCR_MSK;
>> +	ctl |= MA35_SDHCI_INCR16|MA35_SDHCI_INCR8;
>> +	sdhci_writew(host, ctl, MA35_SDHCI_MBIUCTL);
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct of_device_id sdhci_ma35_dt_ids[] = {
>> +	{ .compatible = "nuvoton,ma35d1-sdhci" },
>> +	{}
>> +};
>> +
>> +static struct platform_driver sdhci_ma35_driver = {
>> +	.driver	= {
>> +		.name	= "sdhci-ma35",
>> +		.of_match_table = sdhci_ma35_dt_ids,
>> +	},
>> +	.probe	= ma35_probe,
>> +	.remove_new = sdhci_pltfm_remove,
>> +};
>> +module_platform_driver(sdhci_ma35_driver);
>> +
>> +MODULE_DESCRIPTION("SDHCI platform driver for Nuvoton MA35");
>> +MODULE_AUTHOR("Shan-Chun Hung <shanchun1218@google.com>");
> "From:" is shanchun1218@gmail.com
> "Signed-off-by" is shanchun1218@gmail.com
>
> but here it is shanchun1218@google.com
>
> Please be consistent
I will fix it.
>
>> +MODULE_LICENSE("GPL v2");
> checkpatch says:
>
> WARNING: Prefer "GPL" over "GPL v2" - see commit bf7fbeeae6db ("module: Cure the MODULE_LICENSE "GPL" vs. "GPL v2" bogosity")
> #351: FILE: drivers/mmc/host/sdhci-of-ma35d1.c:291:
> +MODULE_LICENSE("GPL v2");
I will fix it.
>> --
>> 2.25.1

Best Regards,

Shan-Chun

On 28/06/24 09:30, Shan-Chun Hung wrote:
> On 2024/6/27 下午 05:40, Adrian Hunter wrote:
>> On 26/06/24 12:49, Shan-Chun Hung wrote:
>>> +    /* Enable INCR16 and INCR8 */
>> Comment would be more useful if it said what INCR16 and
>> INCR8 are
> 
> I will modify as follows:
> 
> /*
>  * Split data into chunks of 16 or 8 bytes for sending.
>  * Each chunk transfer is guaranteed to be uninterrupted on the bus.
>  */
> 

AFAICT, it relates to AHB bus DMA burst size, so maybe add
that if it is correct.

Dear Adrian,

Yes, that is correct. It relates to the AHB bus DMA burst size.

     /*
      * Split data into chunks of 16 or 8 bytes for sending.
      * Each chunk transfer is guaranteed to be uninterrupted on the bus.
      * This likely corresponds to the AHB bus DMA burst size.
      */

Best Regards,

Shan-Chun

On 2024/6/28 下午 02:59, Adrian Hunter wrote:
> On 28/06/24 09:30, Shan-Chun Hung wrote:
>> On 2024/6/27 下午 05:40, Adrian Hunter wrote:
>>> On 26/06/24 12:49, Shan-Chun Hung wrote:
>>>> +    /* Enable INCR16 and INCR8 */
>>> Comment would be more useful if it said what INCR16 and
>>> INCR8 are
>> I will modify as follows:
>>
>> /*
>>   * Split data into chunks of 16 or 8 bytes for sending.
>>   * Each chunk transfer is guaranteed to be uninterrupted on the bus.
>>   */
>>
> AFAICT, it relates to AHB bus DMA burst size, so maybe add
> that if it is correct.
>

On 26/06/2024 11:49, Shan-Chun Hung wrote:
> Add the SDHCI driver for the MA35D1 platform. It is based upon the
> SDHCI interface, but requires some extra initialization.
> 


> +static int ma35_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct sdhci_pltfm_host *pltfm_host;
> +	struct sdhci_host *host;
> +	struct ma35_priv *priv;
> +	int err;
> +	u32 extra, ctl;
> +
> +	host = sdhci_pltfm_init(pdev, &sdhci_ma35_pdata, sizeof(struct ma35_priv));
> +	if (IS_ERR(host))
> +		return PTR_ERR(host);
> +
> +	err = devm_add_action_or_reset(dev, ma35_sdhci_pltfm_free, pdev);
> +	if (err)
> +		return dev_err_probe(dev, err, "Failed to register sdhci_pltfm_free action\n");
> +
> +	/* Extra adma table cnt for cross 128M boundary handling. */
> +	extra = DIV_ROUND_UP_ULL(dma_get_required_mask(dev), SZ_128M);
> +	extra = min(extra, SDHCI_MAX_SEGS);
> +
> +	host->adma_table_cnt += extra;
> +	pltfm_host = sdhci_priv(host);
> +	priv = sdhci_pltfm_priv(pltfm_host);
> +
> +	pltfm_host->clk = devm_clk_get_optional_enabled(dev, NULL);
> +	if (IS_ERR(pltfm_host->clk))
> +		return dev_err_probe(dev, IS_ERR(pltfm_host->clk), "failed to get clk\n");

Ykes, you cannot return IS_ERR.

> +
> +	err = mmc_of_parse(host->mmc);
> +	if (err)
> +		return err;
> +
> +	priv->rst = devm_reset_control_get_exclusive(dev, NULL);
> +	if (IS_ERR(priv->rst))
> +		return dev_err_probe(dev, PTR_ERR(priv->rst), "failed to get reset control\n");
> +


Best regards,
Krzysztof

Dear Krzysztof,

Thanks for your review.

On 2024/6/28 下午 03:31, Krzysztof Kozlowski wrote:
> On 26/06/2024 11:49, Shan-Chun Hung wrote:
>> Add the SDHCI driver for the MA35D1 platform. It is based upon the
>> SDHCI interface, but requires some extra initialization.
>>
>
>> +static int ma35_probe(struct platform_device *pdev)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	struct sdhci_pltfm_host *pltfm_host;
>> +	struct sdhci_host *host;
>> +	struct ma35_priv *priv;
>> +	int err;
>> +	u32 extra, ctl;
>> +
>> +	host = sdhci_pltfm_init(pdev, &sdhci_ma35_pdata, sizeof(struct ma35_priv));
>> +	if (IS_ERR(host))
>> +		return PTR_ERR(host);
>> +
>> +	err = devm_add_action_or_reset(dev, ma35_sdhci_pltfm_free, pdev);
>> +	if (err)
>> +		return dev_err_probe(dev, err, "Failed to register sdhci_pltfm_free action\n");
>> +
>> +	/* Extra adma table cnt for cross 128M boundary handling. */
>> +	extra = DIV_ROUND_UP_ULL(dma_get_required_mask(dev), SZ_128M);
>> +	extra = min(extra, SDHCI_MAX_SEGS);
>> +
>> +	host->adma_table_cnt += extra;
>> +	pltfm_host = sdhci_priv(host);
>> +	priv = sdhci_pltfm_priv(pltfm_host);
>> +
>> +	pltfm_host->clk = devm_clk_get_optional_enabled(dev, NULL);
>> +	if (IS_ERR(pltfm_host->clk))
>> +		return dev_err_probe(dev, IS_ERR(pltfm_host->clk), "failed to get clk\n");
> Ykes, you cannot return IS_ERR.
I will fix it to PTR_ERR.
>> +
>> +	err = mmc_of_parse(host->mmc);
>> +	if (err)
>> +		return err;
>> +
>> +	priv->rst = devm_reset_control_get_exclusive(dev, NULL);
>> +	if (IS_ERR(priv->rst))
>> +		return dev_err_probe(dev, PTR_ERR(priv->rst), "failed to get reset control\n");
>> +
>
> Best regards,
> Krzysztof

Best Regards,

Shan-Chun