diff mbox series

[v2,2/3] serial: qcom-geni: fix hard lockup on buffer flush

Message ID 20240704101805.30612-3-johan+linaro@kernel.org
State New
Headers show
Series serial: qcom-geni: fix lockups | expand

Commit Message

Johan Hovold July 4, 2024, 10:18 a.m. UTC
The Qualcomm GENI serial driver does not handle buffer flushing and used
to continue printing discarded characters when the circular buffer was
cleared. Since commit 1788cf6a91d9 ("tty: serial: switch from circ_buf
to kfifo") this instead results in a hard lockup due to
qcom_geni_serial_send_chunk_fifo() spinning indefinitely in the
interrupt handler.

This is easily triggered by interrupting a command such as dmesg in a
serial console but can also happen when stopping a serial getty on
reboot.

Implement the flush_buffer() callback and use it to cancel any active TX
command when the write buffer has been emptied.

Reported-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/lkml/20240610222515.3023730-1-dianders@chromium.org/
Fixes: 1788cf6a91d9 ("tty: serial: switch from circ_buf to kfifo")
Fixes: a1fee899e5be ("tty: serial: qcom_geni_serial: Fix softlock")
Cc: stable@vger.kernel.org	# 5.0
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 drivers/tty/serial/qcom_geni_serial.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index a41360d34790..b2bbd2d79dbb 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -906,13 +906,17 @@  static void qcom_geni_serial_handle_tx_fifo(struct uart_port *uport,
 	else
 		pending = kfifo_len(&tport->xmit_fifo);
 
-	/* All data has been transmitted and acknowledged as received */
-	if (!pending && !status && done) {
+	/* All data has been transmitted or command has been cancelled */
+	if (!pending && done) {
 		qcom_geni_serial_stop_tx_fifo(uport);
 		goto out_write_wakeup;
 	}
 
-	avail = port->tx_fifo_depth - (status & TX_FIFO_WC);
+	if (active)
+		avail = port->tx_fifo_depth - (status & TX_FIFO_WC);
+	else
+		avail = port->tx_fifo_depth;
+
 	avail *= BYTES_PER_FIFO_WORD;
 
 	chunk = min(avail, pending);
@@ -1091,6 +1095,11 @@  static void qcom_geni_serial_shutdown(struct uart_port *uport)
 	qcom_geni_serial_cancel_tx_cmd(uport);
 }
 
+static void qcom_geni_serial_flush_buffer(struct uart_port *uport)
+{
+	qcom_geni_serial_cancel_tx_cmd(uport);
+}
+
 static int qcom_geni_serial_port_setup(struct uart_port *uport)
 {
 	struct qcom_geni_serial_port *port = to_dev_port(uport);
@@ -1547,6 +1556,7 @@  static const struct uart_ops qcom_geni_console_pops = {
 	.request_port = qcom_geni_serial_request_port,
 	.config_port = qcom_geni_serial_config_port,
 	.shutdown = qcom_geni_serial_shutdown,
+	.flush_buffer = qcom_geni_serial_flush_buffer,
 	.type = qcom_geni_serial_get_type,
 	.set_mctrl = qcom_geni_serial_set_mctrl,
 	.get_mctrl = qcom_geni_serial_get_mctrl,