@@ -411,66 +411,134 @@ static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = {
RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo, "vdd-l7-l11"),
{}
};
-static int rpmh_regulator_probe(struct platform_device *pdev)
+/* probe an individual regulator */
+static int rpmh_regulator_probe(struct udevice *dev)
{
- struct device *dev = &pdev->dev;
- const struct rpmh_vreg_init_data *vreg_data;
- struct device_node *node;
- struct rpmh_vreg *vreg;
- const char *pmic_id;
- int ret;
+ const struct rpmh_vreg_init_data *init_data;
+ struct rpmh_vreg *priv;
+ struct dm_regulator_uclass_plat *plat_data;
- vreg_data = of_device_get_match_data(dev);
- if (!vreg_data)
+ init_data = (const struct rpmh_vreg_init_data *)dev_get_driver_data(dev);
+ priv = dev_get_priv(dev);
+ plat_data = dev_get_uclass_plat(dev);
+
+ priv->dev = dev;
+ priv->addr = cmd_db_read_addr(dev->name);
+ if (!priv->addr) {
+ dev_err(dev, "Failed to read RPMh address for %s\n", dev->name);
return -ENODEV;
-
- ret = of_property_read_string(dev->of_node, "qcom,pmic-id", &pmic_id);
- if (ret < 0) {
- dev_err(dev, "qcom,pmic-id missing in DT node\n");
- return ret;
}
- for_each_available_child_of_node(dev->of_node, node) {
- vreg = devm_kzalloc(dev, sizeof(*vreg), GFP_KERNEL);
- if (!vreg) {
- of_node_put(node);
+ priv->hw_data = init_data->hw_data;
+ priv->enabled = -EINVAL;
+ priv->uv = -ENOTRECOVERABLE;
+ if (ofnode_read_u32(dev_ofnode(dev), "regulator-initial-mode", &priv->mode))
+ priv->mode = -EINVAL;
+
+ plat_data->mode = priv->hw_data->pmic_mode_map;
+ plat_data->mode_count = priv->hw_data->n_modes;
+
+ return 0;
+}
+
+/* for non-drm, xob, or bypass regulators add additional driver definitions */
+U_BOOT_DRIVER(rpmh_regulator_drm) = {
+ .name = "rpmh_regulator_drm",
+ .id = UCLASS_REGULATOR,
+ .probe = rpmh_regulator_probe,
+ .priv_auto = sizeof(struct rpmh_vreg),
+ .ops = &rpmh_regulator_vrm_drms_ops,
+};
+
+/* This driver intentionally only supports a subset of the available regulators.
+ * This function checks to see if a given regulator node in DT matches a regulator
+ * defined in the driver.
+ */
+static const struct rpmh_vreg_init_data *
+vreg_get_init_data(const struct rpmh_vreg_init_data *init_data, ofnode node)
+{
+ const struct rpmh_vreg_init_data *data;
+
+ for (data = init_data; data->name; data++) {
+ if (!strcmp(data->name, ofnode_get_name(node)))
+ return data;
+ }
+
+ return NULL;
+}
+
+static int rpmh_regulators_bind(struct udevice *dev)
+{
+ const struct rpmh_vreg_init_data *init_data, *data;
+ const char *pmic_id;
+ char *name;
+ struct driver *drv;
+ ofnode node;
+ int ret;
+ size_t namelen;
+
+ init_data = (const struct rpmh_vreg_init_data *)dev_get_driver_data(dev);
+ if (!init_data) {
+ dev_err(dev, "No RPMh regulator init data\n");
+ return -ENODEV;
+ }
+
+ pmic_id = ofnode_read_string(dev_ofnode(dev), "qcom,pmic-id");
+ if (!pmic_id) {
+ dev_err(dev, "No PMIC ID\n");
+ return -ENODEV;
+ }
+
+ drv = lists_driver_lookup_name("rpmh_regulator_drm");
+
+ ofnode_for_each_subnode(node, dev_ofnode(dev)) {
+ data = vreg_get_init_data(init_data, node);
+ if (!data)
+ continue;
+
+ /* %s is replaced with pmic_id, so subtract 2, then add 1 for the null terminator */
+ namelen = strlen(data->resource_name) + strlen(pmic_id) - 1;
+ name = devm_kzalloc(dev, namelen, GFP_KERNEL);
+ ret = snprintf(name, namelen, data->resource_name, pmic_id);
+ if (ret < 0 || ret >= namelen) {
+ dev_err(dev, "Failed to create RPMh regulator name\n");
return -ENOMEM;
}
- ret = rpmh_regulator_init_vreg(vreg, dev, node, pmic_id,
- vreg_data);
+ ret = device_bind_with_driver_data(dev, drv, name, (ulong)data,
+ node, NULL);
if (ret < 0) {
- of_node_put(node);
+ dev_err(dev, "Failed to bind RPMh regulator %s: %d\n", name, ret);
return ret;
}
}
return 0;
}
-static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
+static const struct udevice_id rpmh_regulator_ids[] = {
{
.compatible = "qcom,pm8150-rpmh-regulators",
- .data = pm8150_vreg_data,
+ .data = (ulong)pm8150_vreg_data,
},
{
.compatible = "qcom,pm8150l-rpmh-regulators",
- .data = pm8150l_vreg_data,
+ .data = (ulong)pm8150l_vreg_data,
},
- {}
+ { /* sentinal */ },
};
-MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table);
-static struct platform_driver rpmh_regulator_driver = {
- .driver = {
- .name = "qcom-rpmh-regulator",
- .probe_type = PROBE_PREFER_ASYNCHRONOUS,
- .of_match_table = of_match_ptr(rpmh_regulator_match_table),
- },
- .probe = rpmh_regulator_probe,
+/* Driver for a 'bank' of regulators. This creates devices for each
+ * individual regulator
+ */
+U_BOOT_DRIVER(rpmh_regulators) = {
+ .name = "rpmh_regulators",
+ .id = UCLASS_MISC,
+ .bind = rpmh_regulators_bind,
+ .of_match = rpmh_regulator_ids,
+ .ops = &rpmh_regulator_vrm_drms_ops,
};
-module_platform_driver(rpmh_regulator_driver);
MODULE_DESCRIPTION("Qualcomm RPMh regulator driver");
MODULE_LICENSE("GPL v2");
Refactor initialization to use U-Boot's driver model and API. Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> --- drivers/power/regulator/qcom-rpmh-regulator.c | 136 +++++++++++++++++++------- 1 file changed, 102 insertions(+), 34 deletions(-)