diff mbox

[4/5] OpenACC tile clause support, Fortran front-end parts

Message ID 87a13495-a378-b5e1-8223-0f5679f98356@mentor.com
State New
Headers show

Commit Message

Chung-Lin Tang Nov. 10, 2016, 10:46 a.m. UTC 
The Fortran front-end patches. These were originally written by Cesar.

Thanks,
Chung-Lin

2016-XX-XX  Cesar Philippidis  <cesar@codesourcery.com>

	fortran/
	* openmp.c (resolve_oacc_positive_int_expr): Promote the warning
	to an error.
	(resolve_oacc_loop_blocks): Use integer zero to represent the '*'
	tile argument.
	(resolve_omp_clauses): Error on directives containing both tile
	and collapse clauses.
	* trans-openmp.c (gfc_trans_omp_do): Lower tiled loops like
	collapsed loops.


	gcc/testsuite/
	* gfortran.dg/goacc/loop-2.f95: Change expected tile clause
        warnings to errors.
        * gfortran.dg/goacc/loop-5.f95: Likewise.
        * gfortran.dg/goacc/sie.f95: Likewise.
        * gfortran.dg/goacc/tile-1.f90: New test.
        * gfortran.dg/goacc/tile-2.f90: New test
        * gfortran.dg/goacc/tile-lowering.f95: New test.

Comments

Jakub Jelinek Nov. 11, 2016, 10:34 a.m. UTC | #1 
On Thu, Nov 10, 2016 at 06:46:46PM +0800, Chung-Lin Tang wrote:
> 

> Thanks,

> Chung-Lin

> 

> 2016-XX-XX  Cesar Philippidis  <cesar@codesourcery.com>

> 

> 	fortran/

> 	* openmp.c (resolve_oacc_positive_int_expr): Promote the warning

> 	to an error.

> 	(resolve_oacc_loop_blocks): Use integer zero to represent the '*'

> 	tile argument.

> 	(resolve_omp_clauses): Error on directives containing both tile

> 	and collapse clauses.

> 	* trans-openmp.c (gfc_trans_omp_do): Lower tiled loops like

> 	collapsed loops.

> 

> 

> 	gcc/testsuite/

> 	* gfortran.dg/goacc/loop-2.f95: Change expected tile clause

>         warnings to errors.

>         * gfortran.dg/goacc/loop-5.f95: Likewise.

>         * gfortran.dg/goacc/sie.f95: Likewise.

>         * gfortran.dg/goacc/tile-1.f90: New test.

>         * gfortran.dg/goacc/tile-2.f90: New test

>         * gfortran.dg/goacc/tile-lowering.f95: New test.


Again, 8 spaces in ChangeLog.  Missing full stop after New test

> --- fortran/openmp.c	(revision 241809)

> +++ fortran/openmp.c	(working copy)

> @@ -3024,8 +3024,8 @@ resolve_oacc_positive_int_expr (gfc_expr *expr, co

>    resolve_oacc_scalar_int_expr (expr, clause);

>    if (expr->expr_type == EXPR_CONSTANT && expr->ts.type == BT_INTEGER

>        && mpz_sgn(expr->value.integer) <= 0)

> -    gfc_warning (0, "INTEGER expression of %s clause at %L must be positive",

> -		     clause, &expr->where);

> +    gfc_error ("INTEGER expression of %s clause at %L must be positive",

> +	       clause, &expr->where);

>  }


This can't be against current trunk.  The current routine is shared with
OpenMP and gfc_error is undesirable there.

> @@ -3859,6 +3859,8 @@ resolve_omp_clauses (gfc_code *code, gfc_omp_claus

>      if (omp_clauses->wait_list)

>        for (el = omp_clauses->wait_list; el; el = el->next)

>  	resolve_oacc_scalar_int_expr (el->expr, "WAIT");

> +  if (omp_clauses->collapse && omp_clauses->tile_list)

> +    gfc_error ("Incompatible use of TILE and COLLAPSE at %L", &code->loc);


Shouldn't you in that case for error recovery clear collapse (or tile_list)?

	Jakub
diff mbox

Patch

Index: fortran/openmp.c
===================================================================
--- fortran/openmp.c	(revision 241809)
+++ fortran/openmp.c	(working copy)
@@ -3024,8 +3024,8 @@  resolve_oacc_positive_int_expr (gfc_expr *expr, co
   resolve_oacc_scalar_int_expr (expr, clause);
   if (expr->expr_type == EXPR_CONSTANT && expr->ts.type == BT_INTEGER
       && mpz_sgn(expr->value.integer) <= 0)
-    gfc_warning (0, "INTEGER expression of %s clause at %L must be positive",
-		     clause, &expr->where);
+    gfc_error ("INTEGER expression of %s clause at %L must be positive",
+	       clause, &expr->where);
 }
 
 /* Emits error when symbol is pointer, cray pointer or cray pointee
@@ -3859,6 +3859,8 @@  resolve_omp_clauses (gfc_code *code, gfc_omp_claus
     if (omp_clauses->wait_list)
       for (el = omp_clauses->wait_list; el; el = el->next)
 	resolve_oacc_scalar_int_expr (el->expr, "WAIT");
+  if (omp_clauses->collapse && omp_clauses->tile_list)
+    gfc_error ("Incompatible use of TILE and COLLAPSE at %L", &code->loc);
 }
 
 
@@ -4964,11 +4966,11 @@  resolve_oacc_loop_blocks (gfc_code *code)
 	  if (el->expr == NULL)
 	    {
 	      /* NULL expressions are used to represent '*' arguments.
-		 Convert those to a -1 expressions.  */
+		 Convert those to a 0 expressions.  */
 	      el->expr = gfc_get_constant_expr (BT_INTEGER,
 						gfc_default_integer_kind,
 						&code->loc);
-	      mpz_set_si (el->expr->value.integer, -1);
+	      mpz_set_si (el->expr->value.integer, 0);
 	    }
 	  else
 	    {
Index: fortran/trans-openmp.c
===================================================================
--- fortran/trans-openmp.c	(revision 241809)
+++ fortran/trans-openmp.c	(working copy)
@@ -3162,7 +3162,18 @@  gfc_trans_omp_do (gfc_code *code, gfc_exec_op op,
   vec<dovar_init> inits = vNULL;
   dovar_init *di;
   unsigned ix;
+  gfc_expr_list *tile = do_clauses ? do_clauses->tile_list : clauses->tile_list;
 
+  /* Both collapsed and tiled loops are lowered the same way.  In
+     OpenACC, those clauses are not compatible, so prioritize the tile
+     clause, if present.  */
+  if (tile)
+    {
+      collapse = 0;
+      for (gfc_expr_list *el = tile; el; el = el->next)
+	collapse++;
+    }
+
   if (collapse <= 0)
     collapse = 1;
 
Index: testsuite/gfortran.dg/goacc/loop-5.f95
===================================================================
--- testsuite/gfortran.dg/goacc/loop-5.f95	(revision 241809)
+++ testsuite/gfortran.dg/goacc/loop-5.f95	(working copy)
@@ -93,9 +93,6 @@  program test
       DO j = 1,10
       ENDDO
     ENDDO
-    !$acc loop tile(-1) ! { dg-warning "must be positive" }
-    do i = 1,10
-    enddo
     !$acc loop vector tile(*)
     DO i = 1,10
     ENDDO
@@ -129,9 +126,6 @@  program test
       DO j = 1,10
       ENDDO
     ENDDO
-    !$acc loop tile(-1) ! { dg-warning "must be positive" }
-    do i = 1,10
-    enddo
     !$acc loop vector tile(*)
     DO i = 1,10
     ENDDO
@@ -242,9 +236,6 @@  program test
     DO j = 1,10
     ENDDO
   ENDDO
-  !$acc kernels loop tile(-1) ! { dg-warning "must be positive" }
-  do i = 1,10
-  enddo
   !$acc kernels loop vector tile(*)
   DO i = 1,10
   ENDDO
@@ -333,9 +324,6 @@  program test
     DO j = 1,10
     ENDDO
   ENDDO
-  !$acc parallel loop tile(-1) ! { dg-warning "must be positive" }
-  do i = 1,10
-  enddo
   !$acc parallel loop vector tile(*)
   DO i = 1,10
   ENDDO
Index: testsuite/gfortran.dg/goacc/tile-1.f90
===================================================================
--- testsuite/gfortran.dg/goacc/tile-1.f90	(revision 0)
+++ testsuite/gfortran.dg/goacc/tile-1.f90	(revision 0)
@@ -0,0 +1,339 @@ 
+subroutine parloop
+  integer, parameter :: n = 100
+  integer i, j, k, a
+
+  !$acc parallel loop tile(10)
+  do i = 1, n
+  end do
+  
+  !$acc parallel loop tile(*)
+  do i = 1, n
+  end do
+
+  !$acc parallel loop tile(10, *)
+  do i = 1, n
+     do j = 1, n
+     end do
+  end do
+ 
+  !$acc parallel loop tile(10, *, i) ! { dg-error "" }
+  do i = 1, n
+     do j = 1, n
+        do k = 1, n
+        end do
+     end do
+  end do 
+
+  !$acc parallel loop tile ! { dg-error "Unclassifiable" }
+  do i = 1, n
+  end do
+
+  !$acc parallel loop tile() ! { dg-error "Syntax error" }
+  do i = 1, n
+  end do
+
+  !$acc parallel loop tile(,1) ! { dg-error "Syntax error" }
+  do i = 1, n
+  end do
+
+  !$acc parallel loop tile(,,) ! { dg-error "Syntax error" }
+  do i = 1, n
+  end do
+
+  !$acc parallel loop tile(1.1) ! { dg-error "requires a scalar INTEGER" }
+  do i = 1, n
+  end do
+
+  !$acc parallel loop tile(-3) ! { dg-error "must be positive" }
+  do i = 1, n
+  end do
+
+  !$acc parallel loop tile(10, -3) ! { dg-error "must be positive" }
+  do i = 1, n
+     do j = 1, n
+     end do
+  end do
+
+  !$acc parallel loop tile(-100, 10, 5) ! { dg-error "must be positive" }
+  do i = 1, n
+     do j = 1, n
+        do k = 1, n
+        end do
+     end do
+  end do 
+
+  !$acc parallel loop tile(10, .true.) ! { dg-error "requires a scalar" }
+  do i = 1, n
+     do j = 1, n
+     end do
+  end do
+
+  !$acc parallel loop tile(1, a) ! { dg-error "constant expression" }
+  do i = 1, n
+     do j = 1, n
+     end do
+  end do
+
+  !$acc parallel loop tile(a, 1) ! { dg-error "constant expression" }
+  do i = 1, n
+     do j = 1, n
+     end do
+  end do
+
+  !$acc parallel loop tile(2, 3) collapse (2) ! { dg-error "Incompatible use" }
+  do i = 1, n
+     do j = 1, n
+     end do
+  end do
+end subroutine parloop
+
+subroutine par
+  integer, parameter :: n = 100
+  integer i, j, k
+
+  !$acc parallel
+  !$acc loop tile ! { dg-error "Unclassifiable" }
+  do i = 1, n
+  end do
+
+  !$acc loop tile() ! { dg-error "Syntax error" }
+  do i = 1, n
+  end do
+
+  !$acc loop tile(1)
+  do i = 1, n
+  end do
+
+  !$acc loop tile(*)
+  do i = 1, n
+  end do
+
+  !$acc loop tile(2)
+  do i = 1, n
+     do j = 1, n
+     end do
+  end do
+
+  !$acc loop tile(-2) ! { dg-error "must be positive" }
+  do i = 1, n
+  end do
+
+  !$acc loop tile(i) ! { dg-error "constant expression" }
+  do i = 1, n
+  end do
+
+  !$acc loop tile(2, 2, 1)
+  do i = 1, n
+     do j = 1, n
+        do k = 1, n
+        end do
+     end do
+  end do 
+
+  !$acc parallel loop tile(2, 2)
+  do i = 1, n
+     do j = i+1, n, j ! { dg-error "rectangular iteration space" }
+     end do
+  end do
+
+  !$acc loop vector tile(*)
+  do i = 1, n
+  end do
+  
+  !$acc loop worker tile(*)
+  do i = 1, n
+  end do
+
+  !$acc loop gang tile(*)
+  do i = 1, n
+  end do
+
+  !$acc loop vector gang tile(*)
+  do i = 1, n
+  end do
+
+  !$acc loop vector worker tile(*)
+  do i = 1, n
+  end do
+
+  !$acc loop gang worker tile(*)
+  do i = 1, n
+  end do
+
+  !$acc loop tile(2, 3) collapse (2) ! { dg-error "Incompatible use" }
+  do i = 1, n
+     do j = 1, n
+     end do
+  end do
+  !$acc end parallel
+end subroutine par
+
+subroutine kern
+  integer, parameter :: n = 100
+  integer i, j, k
+
+  !$acc kernels
+  !$acc loop tile  ! { dg-error "Unclassifiable" }
+  do i = 1, n
+  end do
+
+  !$acc loop tile() ! { dg-error "Syntax error" }
+  do i = 1, n
+  end do
+
+  !$acc loop tile(1)
+  do i = 1, n
+  end do
+
+  !$acc loop tile(*)
+  do i = 1, n
+  end do
+
+  !$acc loop tile(2)
+  do i = 1, n
+     do j = 1, n
+     end do
+  end do
+
+  !$acc loop tile(-2) ! { dg-error "must be positive" }
+  do i = 1, n
+  end do
+
+  !$acc loop tile(i) ! { dg-error "constant expression" }
+  do i = 1, n
+  end do
+
+  !$acc loop tile(2, 2, 1)
+  do i = 1, n
+     do j = 1, n
+        do k = 1, n
+        end do
+     end do
+  end do 
+
+  !$acc parallel loop tile(2, 2)
+  do i = 1, n
+     do j = 1, n
+     end do
+  end do
+
+  !$acc loop vector tile(*)
+  do i = 1, n
+  end do
+  
+  !$acc loop worker tile(*)
+  do i = 1, n
+  end do
+
+  !$acc loop gang tile(*)
+  do i = 1, n
+  end do
+
+  !$acc loop vector gang tile(*)
+  do i = 1, n
+  end do
+
+  !$acc loop vector worker tile(*)
+  do i = 1, n
+  end do
+
+  !$acc loop gang worker tile(*)
+  do i = 1, n
+  end do
+
+  !$acc loop tile(2, 3) collapse (2) ! { dg-error "Incompatible use" }
+  do i = 1, n
+     do j = 1, n
+     end do
+  end do
+  !$acc end kernels
+end subroutine kern
+
+subroutine kernsloop
+  integer, parameter :: n = 100
+  integer i, j, k, a
+
+  !$acc kernels loop tile(10)
+  do i = 1, n
+  end do
+  
+  !$acc kernels loop tile(*)
+  do i = 1, n
+  end do
+
+  !$acc kernels loop tile(10, *)
+  do i = 1, n
+     do j = 1, n
+     end do
+  end do
+ 
+  !$acc kernels loop tile(10, *, i) ! { dg-error "" }
+  do i = 1, n
+     do j = 1, n
+        do k = 1, n
+        end do
+     end do
+  end do 
+
+  !$acc kernels loop tile ! { dg-error "Unclassifiable" }
+  do i = 1, n
+  end do
+
+  !$acc kernels loop tile() ! { dg-error "Syntax error" }
+  do i = 1, n
+  end do
+
+  !$acc kernels loop tile(,1) ! { dg-error "Syntax error" }
+  do i = 1, n
+  end do
+
+  !$acc kernels loop tile(,,) ! { dg-error "Syntax error" }
+  do i = 1, n
+  end do
+
+  !$acc kernels loop tile(1.1) ! { dg-error "requires a scalar INTEGER" }
+  do i = 1, n
+  end do
+
+  !$acc kernels loop tile(-3) ! { dg-error "must be positive" }
+  do i = 1, n
+  end do
+
+  !$acc kernels loop tile(10, -3) ! { dg-error "must be positive" }
+  do i = 1, n
+     do j = 1, n
+     end do
+  end do
+
+  !$acc kernels loop tile(-100, 10, 5) ! { dg-error "must be positive" }
+  do i = 1, n
+     do j = 1, n
+        do k = 1, n
+        end do
+     end do
+  end do 
+
+  !$acc kernels loop tile(10, .true.) ! { dg-error "requires a scalar" }
+  do i = 1, n
+     do j = 1, n
+     end do
+  end do
+
+  !$acc kernels loop tile(1, a) ! { dg-error "constant expression" }
+  do i = 1, n
+     do j = 1, n
+     end do
+  end do
+
+  !$acc kernels loop tile(a, 1) ! { dg-error "constant expression" }
+  do i = 1, n
+     do j = 1, n
+     end do
+  end do
+
+  !$acc kernels loop tile(2, 3) collapse (2) ! { dg-error "Incompatible use" }
+  do i = 1, n
+     do j = 1, n
+     end do
+  end do
+end subroutine kernsloop
Index: testsuite/gfortran.dg/goacc/tile-2.f90
===================================================================
--- testsuite/gfortran.dg/goacc/tile-2.f90	(revision 0)
+++ testsuite/gfortran.dg/goacc/tile-2.f90	(revision 0)
@@ -0,0 +1,21 @@ 
+subroutine par
+  integer ix, jx
+
+  !$acc parallel
+  !$acc loop tile (*,*) ! { dg-error "not enough DO loops for tiled" }
+  do ix = 1, 30
+  end do
+
+  !$acc loop tile (*,*)
+  do ix = 1, 30
+     do jx = 1, ix ! { dg-error "tiled loops don.t form rectangular" }
+     end do
+  end do
+
+  !$acc loop tile (*)
+  do ix = 1, 30
+     do jx = 1, ix
+     end do
+  end do
+  !$acc end parallel
+end subroutine par
Index: testsuite/gfortran.dg/goacc/sie.f95
===================================================================
--- testsuite/gfortran.dg/goacc/sie.f95	(revision 241809)
+++ testsuite/gfortran.dg/goacc/sie.f95	(working copy)
@@ -78,10 +78,10 @@  program test
   !$acc parallel num_gangs(i+1)
   !$acc end parallel
 
-  !$acc parallel num_gangs(-1) ! { dg-warning "must be positive" }
+  !$acc parallel num_gangs(-1) ! { dg-error "must be positive" }
   !$acc end parallel
 
-  !$acc parallel num_gangs(0) ! { dg-warning "must be positive" }
+  !$acc parallel num_gangs(0) ! { dg-error "must be positive" }
   !$acc end parallel
 
   !$acc parallel num_gangs() ! { dg-error "Invalid character in name" }
@@ -107,10 +107,10 @@  program test
   !$acc parallel num_workers(i+1)
   !$acc end parallel
 
-  !$acc parallel num_workers(-1) ! { dg-warning "must be positive" }
+  !$acc parallel num_workers(-1) ! { dg-error "must be positive" }
   !$acc end parallel
 
-  !$acc parallel num_workers(0) ! { dg-warning "must be positive" }
+  !$acc parallel num_workers(0) ! { dg-error "must be positive" }
   !$acc end parallel
 
   !$acc parallel num_workers() ! { dg-error "Invalid character in name" }
@@ -136,10 +136,10 @@  program test
   !$acc parallel vector_length(i+1)
   !$acc end parallel
 
-  !$acc parallel vector_length(-1) ! { dg-warning "must be positive" }
+  !$acc parallel vector_length(-1) ! { dg-error "must be positive" }
   !$acc end parallel
 
-  !$acc parallel vector_length(0) ! { dg-warning "must be positive" }
+  !$acc parallel vector_length(0) ! { dg-error "must be positive" }
   !$acc end parallel
 
   !$acc parallel vector_length() ! { dg-error "Invalid character in name" }
@@ -166,10 +166,10 @@  program test
   !$acc loop gang(i+1)
   do i = 1,10
   enddo
-  !$acc loop gang(-1) ! { dg-warning "must be positive" }
+  !$acc loop gang(-1) ! { dg-error "must be positive" }
   do i = 1,10
   enddo
-  !$acc loop gang(0) ! { dg-warning "must be positive" }
+  !$acc loop gang(0) ! { dg-error "must be positive" }
   do i = 1,10
   enddo
   !$acc loop gang() ! { dg-error "Invalid character in name" }
@@ -198,10 +198,10 @@  program test
   !$acc loop worker(i+1)
   do i = 1,10
   enddo
-  !$acc loop worker(-1) ! { dg-warning "must be positive" }
+  !$acc loop worker(-1) ! { dg-error "must be positive" }
   do i = 1,10
   enddo
-  !$acc loop worker(0) ! { dg-warning "must be positive" }
+  !$acc loop worker(0) ! { dg-error "must be positive" }
   do i = 1,10
   enddo
   !$acc loop worker() ! { dg-error "Invalid character in name" }
@@ -230,10 +230,10 @@  program test
   !$acc loop vector(i+1)
   do i = 1,10
   enddo
-  !$acc loop vector(-1) ! { dg-warning "must be positive" }
+  !$acc loop vector(-1) ! { dg-error "must be positive" }
   do i = 1,10
   enddo
-  !$acc loop vector(0) ! { dg-warning "must be positive" }
+  !$acc loop vector(0) ! { dg-error "must be positive" }
   do i = 1,10
   enddo
   !$acc loop vector() ! { dg-error "Invalid character in name" }
@@ -249,4 +249,4 @@  program test
   do i = 1,10
   enddo
 
-end program test
\ No newline at end of file
+end program test
Index: testsuite/gfortran.dg/goacc/tile-lowering.f95
===================================================================
--- testsuite/gfortran.dg/goacc/tile-lowering.f95	(revision 0)
+++ testsuite/gfortran.dg/goacc/tile-lowering.f95	(revision 0)
@@ -0,0 +1,292 @@ 
+! { dg-do compile }
+! { dg-additional-options "-fdump-tree-original" }
+
+subroutine par
+  integer i, j, k
+
+  !$acc parallel
+  !$acc loop tile (1)
+  do i = 1, 10
+  end do
+
+  !$acc loop tile (*)
+  do i = 1, 10
+  end do
+
+  !$acc loop tile (1,2)
+  do i = 1, 10
+     do j = 1, 10
+     end do
+  end do
+
+  !$acc loop tile (*,2)
+  do i = 1, 10
+     do j = 1, 10
+     end do
+  end do
+
+  !$acc loop tile (1,*)
+  do i = 1, 10
+     do j = 1, 10
+     end do
+  end do
+
+  !$acc loop tile (*,*)
+  do i = 1, 10
+     do j = 1, 10
+     end do
+  end do
+
+  !$acc loop tile (1,2,3)
+  do i = 1, 10
+     do j = 1, 10
+        do k = 1, 10
+        end do
+     end do
+  end do
+
+  !$acc loop tile (*,2,3)
+  do i = 1, 10
+     do j = 1, 10
+        do k = 1, 10
+        end do
+     end do
+  end do
+
+  !$acc loop tile (1,*,3)
+  do i = 1, 10
+     do j = 1, 10
+        do k = 1, 10
+        end do
+     end do
+  end do
+
+  !$acc loop tile (1,2,*)
+  do i = 1, 10
+     do j = 1, 10
+        do k = 1, 10
+        end do
+     end do
+  end do
+  !$acc end parallel
+end subroutine par
+
+subroutine kerns
+  integer i, j, k
+
+  !$acc kernels
+  !$acc loop tile (1)
+  do i = 1, 10
+  end do
+
+  !$acc loop tile (*)
+  do i = 1, 10
+  end do
+
+  !$acc loop tile (1,2)
+  do i = 1, 10
+     do j = 1, 10
+     end do
+  end do
+
+  !$acc loop tile (*,2)
+  do i = 1, 10
+     do j = 1, 10
+     end do
+  end do
+
+  !$acc loop tile (1,*)
+  do i = 1, 10
+     do j = 1, 10
+     end do
+  end do
+
+  !$acc loop tile (*,*)
+  do i = 1, 10
+     do j = 1, 10
+     end do
+  end do
+
+  !$acc loop tile (1,2,3)
+  do i = 1, 10
+     do j = 1, 10
+        do k = 1, 10
+        end do
+     end do
+  end do
+
+  !$acc loop tile (*,2,3)
+  do i = 1, 10
+     do j = 1, 10
+        do k = 1, 10
+        end do
+     end do
+  end do
+
+  !$acc loop tile (1,*,3)
+  do i = 1, 10
+     do j = 1, 10
+        do k = 1, 10
+        end do
+     end do
+  end do
+
+  !$acc loop tile (1,2,*)
+  do i = 1, 10
+     do j = 1, 10
+        do k = 1, 10
+        end do
+     end do
+  end do
+  !$acc end kernels
+end subroutine kerns
+
+subroutine parloop
+  integer i, j, k
+
+  !$acc parallel loop tile (1)
+  do i = 1, 10
+  end do
+
+  !$acc parallel loop tile (*)
+  do i = 1, 10
+  end do
+
+  !$acc parallel loop tile (1,2)
+  do i = 1, 10
+     do j = 1, 10
+     end do
+  end do
+
+  !$acc parallel loop tile (*,2)
+  do i = 1, 10
+     do j = 1, 10
+     end do
+  end do
+
+  !$acc parallel loop tile (1,*)
+  do i = 1, 10
+     do j = 1, 10
+     end do
+  end do
+
+  !$acc parallel loop tile (*,*)
+  do i = 1, 10
+     do j = 1, 10
+     end do
+  end do
+
+  !$acc parallel loop tile (1,2,3)
+  do i = 1, 10
+     do j = 1, 10
+        do k = 1, 10
+        end do
+     end do
+  end do
+
+  !$acc parallel loop tile (*,2,3)
+  do i = 1, 10
+     do j = 1, 10
+        do k = 1, 10
+        end do
+     end do
+  end do
+
+  !$acc parallel loop tile (1,*,3)
+  do i = 1, 10
+     do j = 1, 10
+        do k = 1, 10
+        end do
+     end do
+  end do
+
+  !$acc parallel loop tile (1,2,*)
+  do i = 1, 10
+     do j = 1, 10
+        do k = 1, 10
+        end do
+     end do
+  end do
+end subroutine parloop
+
+subroutine kernloop
+  integer i, j, k
+
+  !$acc kernels loop tile (1)
+  do i = 1, 10
+  end do
+
+  !$acc kernels loop tile (*)
+  do i = 1, 10
+  end do
+
+  !$acc kernels loop tile (1,2)
+  do i = 1, 10
+     do j = 1, 10
+     end do
+  end do
+
+  !$acc kernels loop tile (*,2)
+  do i = 1, 10
+     do j = 1, 10
+     end do
+  end do
+
+  !$acc kernels loop tile (1,*)
+  do i = 1, 10
+     do j = 1, 10
+     end do
+  end do
+
+  !$acc kernels loop tile (*,*)
+  do i = 1, 10
+     do j = 1, 10
+     end do
+  end do
+
+  !$acc kernels loop tile (1,2,3)
+  do i = 1, 10
+     do j = 1, 10
+        do k = 1, 10
+        end do
+     end do
+  end do
+
+  !$acc kernels loop tile (*,2,3)
+  do i = 1, 10
+     do j = 1, 10
+        do k = 1, 10
+        end do
+     end do
+  end do
+
+  !$acc kernels loop tile (1,*,3)
+  do i = 1, 10
+     do j = 1, 10
+        do k = 1, 10
+        end do
+     end do
+  end do
+
+  !$acc kernels loop tile (1,2,*)
+  do i = 1, 10
+     do j = 1, 10
+        do k = 1, 10
+        end do
+     end do
+  end do
+end subroutine kernloop
+
+
+! { dg-final { scan-tree-dump-times "tile\\(1\\)" 4 "original" } }
+! { dg-final { scan-tree-dump-times "tile\\(0\\)" 4 "original" } }
+! { dg-final { scan-tree-dump-times "tile\\(1, 2\\)" 4 "original" } }
+! { dg-final { scan-tree-dump-times "tile\\(0, 2\\)" 4 "original" } }
+! { dg-final { scan-tree-dump-times "tile\\(1, 0\\)" 4 "original" } }
+! { dg-final { scan-tree-dump-times "tile\\(0, 0\\)" 4 "original" } }
+! { dg-final { scan-tree-dump-times "tile\\(1, 2, 3\\)" 4 "original" } }
+! { dg-final { scan-tree-dump-times "tile\\(0, 2, 3\\)" 4 "original" } }
+! { dg-final { scan-tree-dump-times "tile\\(1, 0, 3\\)" 4 "original" } }
+! { dg-final { scan-tree-dump-times "tile\\(1, 2, 0\\)" 4 "original" } }
+! { dg-final { scan-tree-dump-times "for \\(" 88 "original" } }
+! { dg-final { scan-tree-dump-times "while \\(" 0 "original" } }
Index: testsuite/gfortran.dg/goacc/loop-2.f95
===================================================================
--- testsuite/gfortran.dg/goacc/loop-2.f95	(revision 241809)
+++ testsuite/gfortran.dg/goacc/loop-2.f95	(working copy)
@@ -143,7 +143,7 @@  program test
       DO j = 1,10
       ENDDO
     ENDDO
-    !$acc loop tile(-1) ! { dg-warning "must be positive" }
+    !$acc loop tile(-1) ! { dg-error "must be positive" }
     do i = 1,10
     enddo
     !$acc loop tile(i) ! { dg-error "constant expression" }
@@ -307,7 +307,7 @@  program test
       DO j = 1,10
       ENDDO
     ENDDO
-    !$acc loop tile(-1) ! { dg-warning "must be positive" }
+    !$acc loop tile(-1) ! { dg-error "must be positive" }
     do i = 1,10
     enddo
     !$acc loop tile(i) ! { dg-error "constant expression" }
@@ -460,7 +460,7 @@  program test
     DO j = 1,10
     ENDDO
   ENDDO
-  !$acc kernels loop tile(-1) ! { dg-warning "must be positive" }
+  !$acc kernels loop tile(-1) ! { dg-error "must be positive" }
   do i = 1,10
   enddo
   !$acc kernels loop tile(i) ! { dg-error "constant expression" }
@@ -612,7 +612,7 @@  program test
     DO j = 1,10
     ENDDO
   ENDDO
-  !$acc parallel loop tile(-1) ! { dg-warning "must be positive" }
+  !$acc parallel loop tile(-1) ! { dg-error "must be positive" }
   do i = 1,10
   enddo
   !$acc parallel loop tile(i) ! { dg-error "constant expression" }