diff mbox series

[1/1] ASoC: dt-bindings: convert tlv320aic31xx.txt to yaml

Message ID 20240814174422.4026100-1-Frank.Li@nxp.com
State Accepted
Commit e486feb7b8ec04ec7cd53476acc9e18afd4a6a7d
Headers show
Series [1/1] ASoC: dt-bindings: convert tlv320aic31xx.txt to yaml | expand

Commit Message

Frank Li Aug. 14, 2024, 5:44 p.m. UTC 
Convert binding doc tlv320aic31xx.txt to yaml format.
Additional change:
- add i2c node in example.
- replace MICBIAS_OFF with MICBIAS_2_0v in example because MICBIAS_OFF have
been defined in header file.
- add ref to dai-common.yaml.
- add #sound-dai-cells.

Fix below warning:
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/i2c@30a30000/codec@18:
	failed to match any schema with compatible: ['ti,tlv320dac3100']

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 .../bindings/sound/ti,tlv320dac3100.yaml      | 127 ++++++++++++++++++
 .../bindings/sound/tlv320aic31xx.txt          |  77 -----------
 2 files changed, 127 insertions(+), 77 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/ti,tlv320dac3100.yaml
 delete mode 100644 Documentation/devicetree/bindings/sound/tlv320aic31xx.txt

Comments

Rob Herring Aug. 16, 2024, 9:35 p.m. UTC | #1 
On Wed, 14 Aug 2024 13:44:20 -0400, Frank Li wrote:
> Convert binding doc tlv320aic31xx.txt to yaml format.
> Additional change:
> - add i2c node in example.
> - replace MICBIAS_OFF with MICBIAS_2_0v in example because MICBIAS_OFF have
> been defined in header file.
> - add ref to dai-common.yaml.
> - add #sound-dai-cells.
> 
> Fix below warning:
> arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/i2c@30a30000/codec@18:
> 	failed to match any schema with compatible: ['ti,tlv320dac3100']
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  .../bindings/sound/ti,tlv320dac3100.yaml      | 127 ++++++++++++++++++
>  .../bindings/sound/tlv320aic31xx.txt          |  77 -----------
>  2 files changed, 127 insertions(+), 77 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/sound/ti,tlv320dac3100.yaml
>  delete mode 100644 Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
> 

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Mark Brown Aug. 19, 2024, 6:45 p.m. UTC | #2 
On Wed, 14 Aug 2024 13:44:20 -0400, Frank Li wrote:
> Convert binding doc tlv320aic31xx.txt to yaml format.
> Additional change:
> - add i2c node in example.
> - replace MICBIAS_OFF with MICBIAS_2_0v in example because MICBIAS_OFF have
> been defined in header file.
> - add ref to dai-common.yaml.
> - add #sound-dai-cells.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: dt-bindings: convert tlv320aic31xx.txt to yaml
      commit: e486feb7b8ec04ec7cd53476acc9e18afd4a6a7d

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320dac3100.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320dac3100.yaml
new file mode 100644
index 0000000000000..85e937e34962d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,tlv320dac3100.yaml
@@ -0,0 +1,127 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,tlv320dac3100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments - tlv320aic31xx Codec module
+
+maintainers:
+  - Shenghao Ding <shenghao-ding@ti.com>
+
+description: |
+  CODEC output pins:
+    * HPL
+    * HPR
+    * SPL, devices with stereo speaker amp
+    * SPR, devices with stereo speaker amp
+    * SPK, devices with mono speaker amp
+    * MICBIAS
+
+  CODEC input pins:
+    * MIC1LP, devices with ADC
+    * MIC1RP, devices with ADC
+    * MIC1LM, devices with ADC
+    * AIN1, devices without ADC
+    * AIN2, devices without ADC
+
+  The pins can be used in referring sound node's audio-routing property.
+
+properties:
+  compatible:
+    enum:
+      - ti,tlv320aic310x # - Generic TLV320AIC31xx with mono speaker amp
+      - ti,tlv320aic311x # - Generic TLV320AIC31xx with stereo speaker amp
+      - ti,tlv320aic3100 # - TLV320AIC3100 (mono speaker amp, no MiniDSP)
+      - ti,tlv320aic3110 # - TLV320AIC3110 (stereo speaker amp, no MiniDSP)
+      - ti,tlv320aic3120 # - TLV320AIC3120 (mono speaker amp, MiniDSP)
+      - ti,tlv320aic3111 # - TLV320AIC3111 (stereo speaker amp, MiniDSP)
+      - ti,tlv320dac3100 # - TLV320DAC3100 (no ADC, mono speaker amp, no MiniDSP)
+      - ti,tlv320dac3101 # - TLV320DAC3101 (no ADC, stereo speaker amp, no MiniDSP)
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+  HPVDD-supply: true
+
+  SPRVDD-supply: true
+
+  SPLVDD-supply: true
+
+  AVDD-supply: true
+
+  IOVDD-supply: true
+
+  DVDD-supply: true
+
+  reset-gpios:
+    description: GPIO specification for the active low RESET input.
+
+  ai31xx-micbias-vg:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 1
+    enum: [1, 2, 3]
+    description: |
+      MicBias Voltage setting
+        1 or MICBIAS_2_0V - MICBIAS output is powered to 2.0V
+        2 or MICBIAS_2_5V - MICBIAS output is powered to 2.5V
+        3 or MICBIAS_AVDD - MICBIAS output is connected to AVDD
+
+  ai31xx-ocmv:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    description: |
+      output common-mode voltage setting
+        0 - 1.35V,
+        1 - 1.5V,
+        2 - 1.65V,
+        3 - 1.8V
+
+  gpio-reset:
+    description: gpio pin number used for codec reset
+    deprecated: true
+
+
+required:
+  - compatible
+  - reg
+  - HPVDD-supply
+  - SPRVDD-supply
+  - SPLVDD-supply
+  - AVDD-supply
+  - IOVDD-supply
+  - DVDD-supply
+
+allOf:
+  - $ref: dai-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/sound/tlv320aic31xx.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sound@18 {
+            compatible = "ti,tlv320aic311x";
+            reg = <0x18>;
+
+            ai31xx-micbias-vg = <MICBIAS_2_0V>;
+            reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+
+            HPVDD-supply = <&regulator>;
+            SPRVDD-supply = <&regulator>;
+            SPLVDD-supply = <&regulator>;
+            AVDD-supply = <&regulator>;
+            IOVDD-supply = <&regulator>;
+            DVDD-supply = <&regulator>;
+       };
+    };
+
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
deleted file mode 100644
index bbad98d5b9862..0000000000000
--- a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
+++ /dev/null
@@ -1,77 +0,0 @@ 
-Texas Instruments - tlv320aic31xx Codec module
-
-The tlv320aic31xx serial control bus communicates through I2C protocols
-
-Required properties:
-
-- compatible - "string" - One of:
-    "ti,tlv320aic310x" - Generic TLV320AIC31xx with mono speaker amp
-    "ti,tlv320aic311x" - Generic TLV320AIC31xx with stereo speaker amp
-    "ti,tlv320aic3100" - TLV320AIC3100 (mono speaker amp, no MiniDSP)
-    "ti,tlv320aic3110" - TLV320AIC3110 (stereo speaker amp, no MiniDSP)
-    "ti,tlv320aic3120" - TLV320AIC3120 (mono speaker amp, MiniDSP)
-    "ti,tlv320aic3111" - TLV320AIC3111 (stereo speaker amp, MiniDSP)
-    "ti,tlv320dac3100" - TLV320DAC3100 (no ADC, mono speaker amp, no MiniDSP)
-    "ti,tlv320dac3101" - TLV320DAC3101 (no ADC, stereo speaker amp, no MiniDSP)
-
-- reg - <int> -  I2C slave address
-- HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply,
-  DVDD-supply : power supplies for the device as covered in
-  Documentation/devicetree/bindings/regulator/regulator.txt
-
-
-Optional properties:
-
-- reset-gpios - GPIO specification for the active low RESET input.
-- ai31xx-micbias-vg - MicBias Voltage setting
-        1 or MICBIAS_2_0V - MICBIAS output is powered to 2.0V
-        2 or MICBIAS_2_5V - MICBIAS output is powered to 2.5V
-        3 or MICBIAS_AVDD - MICBIAS output is connected to AVDD
-	If this node is not mentioned or if the value is unknown, then
-	micbias	is set to 2.0V.
-- ai31xx-ocmv - output common-mode voltage setting
-        0 - 1.35V,
-        1 - 1.5V,
-        2 - 1.65V,
-        3 - 1.8V
-
-Deprecated properties:
-
-- gpio-reset - gpio pin number used for codec reset
-
-CODEC output pins:
-  * HPL
-  * HPR
-  * SPL, devices with stereo speaker amp
-  * SPR, devices with stereo speaker amp
-  * SPK, devices with mono speaker amp
-  * MICBIAS
-
-CODEC input pins:
-  * MIC1LP, devices with ADC
-  * MIC1RP, devices with ADC
-  * MIC1LM, devices with ADC
-  * AIN1, devices without ADC
-  * AIN2, devices without ADC
-
-The pins can be used in referring sound node's audio-routing property.
-
-Example:
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/sound/tlv320aic31xx.h>
-
-tlv320aic31xx: tlv320aic31xx@18 {
-	compatible = "ti,tlv320aic311x";
-	reg = <0x18>;
-
-	ai31xx-micbias-vg = <MICBIAS_OFF>;
-
-	reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-
-	HPVDD-supply = <&regulator>;
-	SPRVDD-supply = <&regulator>;
-	SPLVDD-supply = <&regulator>;
-	AVDD-supply = <&regulator>;
-	IOVDD-supply = <&regulator>;
-	DVDD-supply = <&regulator>;
-};