diff mbox series

[1/2] media: qcom: camss: add management of supply regulators to CSIPHY

Message ID 20240926211957.4108692-2-vladimir.zapolskiy@linaro.org
State Accepted
Commit 44fdbb9d1a3892db92b2c9cf5f46e32ca4095d92
Headers show
Series media: qcom: camss: manage supply regulators as CSIPHY resources | expand

Commit Message

Vladimir Zapolskiy Sept. 26, 2024, 9:19 p.m. UTC
This change allows to properly assign and manage supply regulator
resources by CSIPHY subdevices of CAMSS, this is needed to fine tune
description of supply regulators on newer platforms, conversion of
old platforms to the new scheme is also anticipated.

Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
---
 .../media/platform/qcom/camss/camss-csiphy.c  | 35 ++++++++++++++++++-
 .../media/platform/qcom/camss/camss-csiphy.h  |  2 ++
 2 files changed, 36 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/media/platform/qcom/camss/camss-csiphy.c b/drivers/media/platform/qcom/camss/camss-csiphy.c
index 2f7361dfd461..68a3ea1ba2a5 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy.c
@@ -212,14 +212,25 @@  static int csiphy_set_power(struct v4l2_subdev *sd, int on)
 		if (ret < 0)
 			return ret;
 
+		ret = regulator_bulk_enable(csiphy->num_supplies,
+					    csiphy->supplies);
+		if (ret < 0) {
+			pm_runtime_put_sync(dev);
+			return ret;
+		}
+
 		ret = csiphy_set_clock_rates(csiphy);
 		if (ret < 0) {
+			regulator_bulk_disable(csiphy->num_supplies,
+					       csiphy->supplies);
 			pm_runtime_put_sync(dev);
 			return ret;
 		}
 
 		ret = camss_enable_clocks(csiphy->nclocks, csiphy->clock, dev);
 		if (ret < 0) {
+			regulator_bulk_disable(csiphy->num_supplies,
+					       csiphy->supplies);
 			pm_runtime_put_sync(dev);
 			return ret;
 		}
@@ -234,6 +245,8 @@  static int csiphy_set_power(struct v4l2_subdev *sd, int on)
 
 		camss_disable_clocks(csiphy->nclocks, csiphy->clock);
 
+		regulator_bulk_disable(csiphy->num_supplies, csiphy->supplies);
+
 		pm_runtime_put_sync(dev);
 	}
 
@@ -676,7 +689,27 @@  int msm_csiphy_subdev_init(struct camss *camss,
 		}
 	}
 
-	return 0;
+	/* CSIPHY supplies */
+	for (i = 0; i < ARRAY_SIZE(res->regulators); i++) {
+		if (res->regulators[i])
+			csiphy->num_supplies++;
+	}
+
+	if (csiphy->num_supplies) {
+		csiphy->supplies = devm_kmalloc_array(camss->dev,
+						      csiphy->num_supplies,
+						      sizeof(*csiphy->supplies),
+						      GFP_KERNEL);
+		if (!csiphy->supplies)
+			return -ENOMEM;
+	}
+
+	for (i = 0; i < csiphy->num_supplies; i++)
+		csiphy->supplies[i].supply = res->regulators[i];
+
+	ret = devm_regulator_bulk_get(camss->dev, csiphy->num_supplies,
+				      csiphy->supplies);
+	return ret;
 }
 
 /*
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy.h b/drivers/media/platform/qcom/camss/camss-csiphy.h
index 47f0b6b09eba..eebc1ff1cfab 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy.h
+++ b/drivers/media/platform/qcom/camss/camss-csiphy.h
@@ -91,6 +91,8 @@  struct csiphy_device {
 	bool *rate_set;
 	int nclocks;
 	u32 timer_clk_rate;
+	struct regulator_bulk_data *supplies;
+	int num_supplies;
 	struct csiphy_config cfg;
 	struct v4l2_mbus_framefmt fmt[MSM_CSIPHY_PADS_NUM];
 	const struct csiphy_subdev_resources *res;