| Message ID | ZxALy6p8m9eS9uIW@Emma |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v3] dt-bindings: spi: Convert to dtschema | expand |
On Wed, Oct 16, 2024 at 06:54:03PM +0000, Karan Sanghavi wrote: > Convert bcm2835-aux-spi binding to Dt schema > > Signed-off-by: Karan Sanghavi <karansanghvi98@gmail.com> Thank you for your patch. There is something to discuss/improve. Subject misses device prefix and considering Mark's preference about spi: it should look like: spi: dt-bindings: brcm,bcm2835-aux-spi: Convert to dtschema > --- > > Changes since V2: > - Modified the Patch subject > - Removed unnecessary description and example > ... > diff --git a/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.yaml b/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.yaml > new file mode 100644 > index 000000000..351019d68 > --- /dev/null > +++ b/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.yaml > @@ -0,0 +1,51 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/spi/brcm,bcm2835-aux-spi.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Broadcom BCM2835 Auxiliary SPI1/2 Controller > + > +maintainers: > + - Karan Sanghavi <karansanghvi98@gmail.com> > + > +description: The BCM2835 contains two forms of SPI master controller. One is known simply as This feels loo long. Wrapping is according to coding style (not checkpatch), so at 80. You can also have line break after "description" keyword, so: description: The BCM2835 contains ...... Rest looks good, so please send v4 unless Mark could fix these up when applying. If sending v4, remember about tag (see explanation below): Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> <form letter> This is an automated instruction, just in case, because many review tags are being ignored. If you know the process, you can skip it (please do not feel offended by me posting it here - no bad intentions intended). If you do not know the process, here is a short explanation: Please add Acked-by/Reviewed-by/Tested-by tags when posting new versions, under or above your Signed-off-by tag. Tag is "received", when provided in a message replied to you on the mailing list. Tools like b4 can help here. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for tags received on the version they apply. https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577 </form letter> Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt b/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt deleted file mode 100644 index d7668f41b..000000000 --- a/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt +++ /dev/null @@ -1,38 +0,0 @@ -Broadcom BCM2835 auxiliary SPI1/2 controller - -The BCM2835 contains two forms of SPI master controller, one known simply as -SPI0, and the other known as the "Universal SPI Master"; part of the -auxiliary block. This binding applies to the SPI1/2 controller. - -Required properties: -- compatible: Should be "brcm,bcm2835-aux-spi". -- reg: Should contain register location and length for the spi block -- interrupts: Should contain shared interrupt of the aux block -- clocks: The clock feeding the SPI controller - needs to - point to the auxiliary clock driver of the bcm2835, - as this clock will enable the output gate for the specific - clock. -- cs-gpios: the cs-gpios (native cs is NOT supported) - see also spi-bus.txt - -Example: - -spi1@7e215080 { - compatible = "brcm,bcm2835-aux-spi"; - reg = <0x7e215080 0x40>; - interrupts = <1 29>; - clocks = <&aux_clocks BCM2835_AUX_CLOCK_SPI1>; - #address-cells = <1>; - #size-cells = <0>; - cs-gpios = <&gpio 18>, <&gpio 17>, <&gpio 16>; -}; - -spi2@7e2150c0 { - compatible = "brcm,bcm2835-aux-spi"; - reg = <0x7e2150c0 0x40>; - interrupts = <1 29>; - clocks = <&aux_clocks BCM2835_AUX_CLOCK_SPI2>; - #address-cells = <1>; - #size-cells = <0>; - cs-gpios = <&gpio 43>, <&gpio 44>, <&gpio 45>; -}; diff --git a/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.yaml b/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.yaml new file mode 100644 index 000000000..351019d68 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/brcm,bcm2835-aux-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM2835 Auxiliary SPI1/2 Controller + +maintainers: + - Karan Sanghavi <karansanghvi98@gmail.com> + +description: The BCM2835 contains two forms of SPI master controller. One is known simply as + SPI0, and the other as the "Universal SPI Master," part of the auxiliary block. + This binding applies to the SPI1 and SPI2 auxiliary controllers. + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + enum: + - brcm,bcm2835-aux-spi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/bcm2835-aux.h> + spi@7e215080 { + compatible = "brcm,bcm2835-aux-spi"; + reg = <0x7e215080 0x40>; + interrupts = <1 29>; + clocks = <&aux_clocks BCM2835_AUX_CLOCK_SPI1>; + #address-cells = <1>; + #size-cells = <0>; + };
Convert bcm2835-aux-spi binding to Dt schema Signed-off-by: Karan Sanghavi <karansanghvi98@gmail.com> --- Changes since V2: - Modified the Patch subject - Removed unnecessary description and example .../bindings/spi/brcm,bcm2835-aux-spi.txt | 38 -------------- .../bindings/spi/brcm,bcm2835-aux-spi.yaml | 51 +++++++++++++++++++ 2 files changed, 51 insertions(+), 38 deletions(-) delete mode 100644 Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt create mode 100644 Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.yaml