@@ -10713,12 +10713,10 @@ F: Documentation/i2c/busses/i2c-viapro.r
F: drivers/i2c/busses/i2c-ali1535.c
F: drivers/i2c/busses/i2c-ali1563.c
F: drivers/i2c/busses/i2c-ali15x3.c
-F: drivers/i2c/busses/i2c-amd756-s4882.c
F: drivers/i2c/busses/i2c-amd756.c
F: drivers/i2c/busses/i2c-amd8111.c
F: drivers/i2c/busses/i2c-i801.c
F: drivers/i2c/busses/i2c-isch.c
-F: drivers/i2c/busses/i2c-nforce2-s4985.c
F: drivers/i2c/busses/i2c-nforce2.c
F: drivers/i2c/busses/i2c-piix4.c
F: drivers/i2c/busses/i2c-sis5595.c
@@ -62,19 +62,6 @@ config I2C_AMD756
This driver can also be built as a module. If so, the module
will be called i2c-amd756.
-config I2C_AMD756_S4882
- tristate "SMBus multiplexing on the Tyan S4882"
- depends on I2C_AMD756 && X86
- help
- Enabling this option will add specific SMBus support for the Tyan
- S4882 motherboard. On this 4-CPU board, the SMBus is multiplexed
- over 8 different channels, where the various memory module EEPROMs
- and temperature sensors live. Saying yes here will give you access
- to these in addition to the trunk.
-
- This driver can also be built as a module. If so, the module
- will be called i2c-amd756-s4882.
-
config I2C_AMD8111
tristate "AMD 8111"
depends on PCI && HAS_IOPORT
@@ -250,19 +237,6 @@ config I2C_NFORCE2
This driver can also be built as a module. If so, the module
will be called i2c-nforce2.
-config I2C_NFORCE2_S4985
- tristate "SMBus multiplexing on the Tyan S4985"
- depends on I2C_NFORCE2 && X86
- help
- Enabling this option will add specific SMBus support for the Tyan
- S4985 motherboard. On this 4-CPU board, the SMBus is multiplexed
- over 4 different channels, where the various memory module EEPROMs
- live. Saying yes here will give you access to these in addition
- to the trunk.
-
- This driver can also be built as a module. If so, the module
- will be called i2c-nforce2-s4985.
-
config I2C_NVIDIA_GPU
tristate "NVIDIA GPU I2C controller"
depends on PCI
@@ -14,14 +14,12 @@ obj-$(CONFIG_I2C_ALI1535) += i2c-ali1535
obj-$(CONFIG_I2C_ALI1563) += i2c-ali1563.o
obj-$(CONFIG_I2C_ALI15X3) += i2c-ali15x3.o
obj-$(CONFIG_I2C_AMD756) += i2c-amd756.o
-obj-$(CONFIG_I2C_AMD756_S4882) += i2c-amd756-s4882.o
obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o
obj-$(CONFIG_I2C_CHT_WC) += i2c-cht-wc.o
obj-$(CONFIG_I2C_I801) += i2c-i801.o
obj-$(CONFIG_I2C_ISCH) += i2c-isch.o
obj-$(CONFIG_I2C_ISMT) += i2c-ismt.o
obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o
-obj-$(CONFIG_I2C_NFORCE2_S4985) += i2c-nforce2-s4985.o
obj-$(CONFIG_I2C_NVIDIA_GPU) += i2c-nvidia-gpu.o
obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o
@@ -1,245 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * i2c-amd756-s4882.c - i2c-amd756 extras for the Tyan S4882 motherboard
- *
- * Copyright (C) 2004, 2008 Jean Delvare <jdelvare@suse.de>
- */
-
-/*
- * We select the channels by sending commands to the Philips
- * PCA9556 chip at I2C address 0x18. The main adapter is used for
- * the non-multiplexed part of the bus, and 4 virtual adapters
- * are defined for the multiplexed addresses: 0x50-0x53 (memory
- * module EEPROM) located on channels 1-4, and 0x4c (LM63)
- * located on multiplexed channels 0 and 5-7. We define one
- * virtual adapter per CPU, which corresponds to two multiplexed
- * channels:
- * CPU0: virtual adapter 1, channels 1 and 0
- * CPU1: virtual adapter 2, channels 2 and 5
- * CPU2: virtual adapter 3, channels 3 and 6
- * CPU3: virtual adapter 4, channels 4 and 7
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/mutex.h>
-
-extern struct i2c_adapter amd756_smbus;
-
-static struct i2c_adapter *s4882_adapter;
-static struct i2c_algorithm *s4882_algo;
-
-/* Wrapper access functions for multiplexed SMBus */
-static DEFINE_MUTEX(amd756_lock);
-
-static s32 amd756_access_virt0(struct i2c_adapter * adap, u16 addr,
- unsigned short flags, char read_write,
- u8 command, int size,
- union i2c_smbus_data * data)
-{
- int error;
-
- /* We exclude the multiplexed addresses */
- if (addr == 0x4c || (addr & 0xfc) == 0x50 || (addr & 0xfc) == 0x30
- || addr == 0x18)
- return -ENXIO;
-
- mutex_lock(&amd756_lock);
-
- error = amd756_smbus.algo->smbus_xfer(adap, addr, flags, read_write,
- command, size, data);
-
- mutex_unlock(&amd756_lock);
-
- return error;
-}
-
-/* We remember the last used channels combination so as to only switch
- channels when it is really needed. This greatly reduces the SMBus
- overhead, but also assumes that nobody will be writing to the PCA9556
- in our back. */
-static u8 last_channels;
-
-static inline s32 amd756_access_channel(struct i2c_adapter * adap, u16 addr,
- unsigned short flags, char read_write,
- u8 command, int size,
- union i2c_smbus_data * data,
- u8 channels)
-{
- int error;
-
- /* We exclude the non-multiplexed addresses */
- if (addr != 0x4c && (addr & 0xfc) != 0x50 && (addr & 0xfc) != 0x30)
- return -ENXIO;
-
- mutex_lock(&amd756_lock);
-
- if (last_channels != channels) {
- union i2c_smbus_data mplxdata;
- mplxdata.byte = channels;
-
- error = amd756_smbus.algo->smbus_xfer(adap, 0x18, 0,
- I2C_SMBUS_WRITE, 0x01,
- I2C_SMBUS_BYTE_DATA,
- &mplxdata);
- if (error)
- goto UNLOCK;
- last_channels = channels;
- }
- error = amd756_smbus.algo->smbus_xfer(adap, addr, flags, read_write,
- command, size, data);
-
-UNLOCK:
- mutex_unlock(&amd756_lock);
- return error;
-}
-
-static s32 amd756_access_virt1(struct i2c_adapter * adap, u16 addr,
- unsigned short flags, char read_write,
- u8 command, int size,
- union i2c_smbus_data * data)
-{
- /* CPU0: channels 1 and 0 enabled */
- return amd756_access_channel(adap, addr, flags, read_write, command,
- size, data, 0x03);
-}
-
-static s32 amd756_access_virt2(struct i2c_adapter * adap, u16 addr,
- unsigned short flags, char read_write,
- u8 command, int size,
- union i2c_smbus_data * data)
-{
- /* CPU1: channels 2 and 5 enabled */
- return amd756_access_channel(adap, addr, flags, read_write, command,
- size, data, 0x24);
-}
-
-static s32 amd756_access_virt3(struct i2c_adapter * adap, u16 addr,
- unsigned short flags, char read_write,
- u8 command, int size,
- union i2c_smbus_data * data)
-{
- /* CPU2: channels 3 and 6 enabled */
- return amd756_access_channel(adap, addr, flags, read_write, command,
- size, data, 0x48);
-}
-
-static s32 amd756_access_virt4(struct i2c_adapter * adap, u16 addr,
- unsigned short flags, char read_write,
- u8 command, int size,
- union i2c_smbus_data * data)
-{
- /* CPU3: channels 4 and 7 enabled */
- return amd756_access_channel(adap, addr, flags, read_write, command,
- size, data, 0x90);
-}
-
-static int __init amd756_s4882_init(void)
-{
- int i, error;
- union i2c_smbus_data ioconfig;
-
- if (!amd756_smbus.dev.parent)
- return -ENODEV;
-
- /* Configure the PCA9556 multiplexer */
- ioconfig.byte = 0x00; /* All I/O to output mode */
- error = i2c_smbus_xfer(&amd756_smbus, 0x18, 0, I2C_SMBUS_WRITE, 0x03,
- I2C_SMBUS_BYTE_DATA, &ioconfig);
- if (error) {
- dev_err(&amd756_smbus.dev, "PCA9556 configuration failed\n");
- error = -EIO;
- goto ERROR0;
- }
-
- /* Unregister physical bus */
- i2c_del_adapter(&amd756_smbus);
-
- printk(KERN_INFO "Enabling SMBus multiplexing for Tyan S4882\n");
- /* Define the 5 virtual adapters and algorithms structures */
- if (!(s4882_adapter = kcalloc(5, sizeof(struct i2c_adapter),
- GFP_KERNEL))) {
- error = -ENOMEM;
- goto ERROR1;
- }
- if (!(s4882_algo = kcalloc(5, sizeof(struct i2c_algorithm),
- GFP_KERNEL))) {
- error = -ENOMEM;
- goto ERROR2;
- }
-
- /* Fill in the new structures */
- s4882_algo[0] = *(amd756_smbus.algo);
- s4882_algo[0].smbus_xfer = amd756_access_virt0;
- s4882_adapter[0] = amd756_smbus;
- s4882_adapter[0].algo = s4882_algo;
- s4882_adapter[0].dev.parent = amd756_smbus.dev.parent;
- for (i = 1; i < 5; i++) {
- s4882_algo[i] = *(amd756_smbus.algo);
- s4882_adapter[i] = amd756_smbus;
- snprintf(s4882_adapter[i].name, sizeof(s4882_adapter[i].name),
- "SMBus 8111 adapter (CPU%d)", i-1);
- s4882_adapter[i].algo = s4882_algo+i;
- s4882_adapter[i].dev.parent = amd756_smbus.dev.parent;
- }
- s4882_algo[1].smbus_xfer = amd756_access_virt1;
- s4882_algo[2].smbus_xfer = amd756_access_virt2;
- s4882_algo[3].smbus_xfer = amd756_access_virt3;
- s4882_algo[4].smbus_xfer = amd756_access_virt4;
-
- /* Register virtual adapters */
- for (i = 0; i < 5; i++) {
- error = i2c_add_adapter(s4882_adapter+i);
- if (error) {
- printk(KERN_ERR "i2c-amd756-s4882: "
- "Virtual adapter %d registration "
- "failed, module not inserted\n", i);
- for (i--; i >= 0; i--)
- i2c_del_adapter(s4882_adapter+i);
- goto ERROR3;
- }
- }
-
- return 0;
-
-ERROR3:
- kfree(s4882_algo);
- s4882_algo = NULL;
-ERROR2:
- kfree(s4882_adapter);
- s4882_adapter = NULL;
-ERROR1:
- /* Restore physical bus */
- i2c_add_adapter(&amd756_smbus);
-ERROR0:
- return error;
-}
-
-static void __exit amd756_s4882_exit(void)
-{
- if (s4882_adapter) {
- int i;
-
- for (i = 0; i < 5; i++)
- i2c_del_adapter(s4882_adapter+i);
- kfree(s4882_adapter);
- s4882_adapter = NULL;
- }
- kfree(s4882_algo);
- s4882_algo = NULL;
-
- /* Restore physical bus */
- if (i2c_add_adapter(&amd756_smbus))
- printk(KERN_ERR "i2c-amd756-s4882: "
- "Physical bus restoration failed\n");
-}
-
-MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
-MODULE_DESCRIPTION("S4882 SMBus multiplexing");
-MODULE_LICENSE("GPL");
-
-module_init(amd756_s4882_init);
-module_exit(amd756_s4882_exit);
@@ -283,7 +283,7 @@ static const struct i2c_algorithm smbus_
.functionality = amd756_func,
};
-struct i2c_adapter amd756_smbus = {
+static struct i2c_adapter amd756_smbus = {
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
.algo = &smbus_algorithm,
@@ -398,5 +398,3 @@ module_pci_driver(amd756_driver);
MODULE_AUTHOR("Merlin Hughes <merlin@merlin.org>");
MODULE_DESCRIPTION("AMD756/766/768/8111 and nVidia nForce SMBus driver");
MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(amd756_smbus);
@@ -1,240 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * i2c-nforce2-s4985.c - i2c-nforce2 extras for the Tyan S4985 motherboard
- *
- * Copyright (C) 2008 Jean Delvare <jdelvare@suse.de>
- */
-
-/*
- * We select the channels by sending commands to the Philips
- * PCA9556 chip at I2C address 0x18. The main adapter is used for
- * the non-multiplexed part of the bus, and 4 virtual adapters
- * are defined for the multiplexed addresses: 0x50-0x53 (memory
- * module EEPROM) located on channels 1-4. We define one virtual
- * adapter per CPU, which corresponds to one multiplexed channel:
- * CPU0: virtual adapter 1, channel 1
- * CPU1: virtual adapter 2, channel 2
- * CPU2: virtual adapter 3, channel 3
- * CPU3: virtual adapter 4, channel 4
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/mutex.h>
-
-extern struct i2c_adapter *nforce2_smbus;
-
-static struct i2c_adapter *s4985_adapter;
-static struct i2c_algorithm *s4985_algo;
-
-/* Wrapper access functions for multiplexed SMBus */
-static DEFINE_MUTEX(nforce2_lock);
-
-static s32 nforce2_access_virt0(struct i2c_adapter *adap, u16 addr,
- unsigned short flags, char read_write,
- u8 command, int size,
- union i2c_smbus_data *data)
-{
- int error;
-
- /* We exclude the multiplexed addresses */
- if ((addr & 0xfc) == 0x50 || (addr & 0xfc) == 0x30
- || addr == 0x18)
- return -ENXIO;
-
- mutex_lock(&nforce2_lock);
- error = nforce2_smbus->algo->smbus_xfer(adap, addr, flags, read_write,
- command, size, data);
- mutex_unlock(&nforce2_lock);
-
- return error;
-}
-
-/* We remember the last used channels combination so as to only switch
- channels when it is really needed. This greatly reduces the SMBus
- overhead, but also assumes that nobody will be writing to the PCA9556
- in our back. */
-static u8 last_channels;
-
-static inline s32 nforce2_access_channel(struct i2c_adapter *adap, u16 addr,
- unsigned short flags, char read_write,
- u8 command, int size,
- union i2c_smbus_data *data,
- u8 channels)
-{
- int error;
-
- /* We exclude the non-multiplexed addresses */
- if ((addr & 0xfc) != 0x50 && (addr & 0xfc) != 0x30)
- return -ENXIO;
-
- mutex_lock(&nforce2_lock);
- if (last_channels != channels) {
- union i2c_smbus_data mplxdata;
- mplxdata.byte = channels;
-
- error = nforce2_smbus->algo->smbus_xfer(adap, 0x18, 0,
- I2C_SMBUS_WRITE, 0x01,
- I2C_SMBUS_BYTE_DATA,
- &mplxdata);
- if (error)
- goto UNLOCK;
- last_channels = channels;
- }
- error = nforce2_smbus->algo->smbus_xfer(adap, addr, flags, read_write,
- command, size, data);
-
-UNLOCK:
- mutex_unlock(&nforce2_lock);
- return error;
-}
-
-static s32 nforce2_access_virt1(struct i2c_adapter *adap, u16 addr,
- unsigned short flags, char read_write,
- u8 command, int size,
- union i2c_smbus_data *data)
-{
- /* CPU0: channel 1 enabled */
- return nforce2_access_channel(adap, addr, flags, read_write, command,
- size, data, 0x02);
-}
-
-static s32 nforce2_access_virt2(struct i2c_adapter *adap, u16 addr,
- unsigned short flags, char read_write,
- u8 command, int size,
- union i2c_smbus_data *data)
-{
- /* CPU1: channel 2 enabled */
- return nforce2_access_channel(adap, addr, flags, read_write, command,
- size, data, 0x04);
-}
-
-static s32 nforce2_access_virt3(struct i2c_adapter *adap, u16 addr,
- unsigned short flags, char read_write,
- u8 command, int size,
- union i2c_smbus_data *data)
-{
- /* CPU2: channel 3 enabled */
- return nforce2_access_channel(adap, addr, flags, read_write, command,
- size, data, 0x08);
-}
-
-static s32 nforce2_access_virt4(struct i2c_adapter *adap, u16 addr,
- unsigned short flags, char read_write,
- u8 command, int size,
- union i2c_smbus_data *data)
-{
- /* CPU3: channel 4 enabled */
- return nforce2_access_channel(adap, addr, flags, read_write, command,
- size, data, 0x10);
-}
-
-static int __init nforce2_s4985_init(void)
-{
- int i, error;
- union i2c_smbus_data ioconfig;
-
- if (!nforce2_smbus)
- return -ENODEV;
-
- /* Configure the PCA9556 multiplexer */
- ioconfig.byte = 0x00; /* All I/O to output mode */
- error = i2c_smbus_xfer(nforce2_smbus, 0x18, 0, I2C_SMBUS_WRITE, 0x03,
- I2C_SMBUS_BYTE_DATA, &ioconfig);
- if (error) {
- dev_err(&nforce2_smbus->dev, "PCA9556 configuration failed\n");
- error = -EIO;
- goto ERROR0;
- }
-
- /* Unregister physical bus */
- i2c_del_adapter(nforce2_smbus);
-
- printk(KERN_INFO "Enabling SMBus multiplexing for Tyan S4985\n");
- /* Define the 5 virtual adapters and algorithms structures */
- s4985_adapter = kcalloc(5, sizeof(struct i2c_adapter), GFP_KERNEL);
- if (!s4985_adapter) {
- error = -ENOMEM;
- goto ERROR1;
- }
- s4985_algo = kcalloc(5, sizeof(struct i2c_algorithm), GFP_KERNEL);
- if (!s4985_algo) {
- error = -ENOMEM;
- goto ERROR2;
- }
-
- /* Fill in the new structures */
- s4985_algo[0] = *(nforce2_smbus->algo);
- s4985_algo[0].smbus_xfer = nforce2_access_virt0;
- s4985_adapter[0] = *nforce2_smbus;
- s4985_adapter[0].algo = s4985_algo;
- s4985_adapter[0].dev.parent = nforce2_smbus->dev.parent;
- for (i = 1; i < 5; i++) {
- s4985_algo[i] = *(nforce2_smbus->algo);
- s4985_adapter[i] = *nforce2_smbus;
- snprintf(s4985_adapter[i].name, sizeof(s4985_adapter[i].name),
- "SMBus nForce2 adapter (CPU%d)", i - 1);
- s4985_adapter[i].algo = s4985_algo + i;
- s4985_adapter[i].dev.parent = nforce2_smbus->dev.parent;
- }
- s4985_algo[1].smbus_xfer = nforce2_access_virt1;
- s4985_algo[2].smbus_xfer = nforce2_access_virt2;
- s4985_algo[3].smbus_xfer = nforce2_access_virt3;
- s4985_algo[4].smbus_xfer = nforce2_access_virt4;
-
- /* Register virtual adapters */
- for (i = 0; i < 5; i++) {
- error = i2c_add_adapter(s4985_adapter + i);
- if (error) {
- printk(KERN_ERR "i2c-nforce2-s4985: "
- "Virtual adapter %d registration "
- "failed, module not inserted\n", i);
- for (i--; i >= 0; i--)
- i2c_del_adapter(s4985_adapter + i);
- goto ERROR3;
- }
- }
-
- return 0;
-
-ERROR3:
- kfree(s4985_algo);
- s4985_algo = NULL;
-ERROR2:
- kfree(s4985_adapter);
- s4985_adapter = NULL;
-ERROR1:
- /* Restore physical bus */
- i2c_add_adapter(nforce2_smbus);
-ERROR0:
- return error;
-}
-
-static void __exit nforce2_s4985_exit(void)
-{
- if (s4985_adapter) {
- int i;
-
- for (i = 0; i < 5; i++)
- i2c_del_adapter(s4985_adapter+i);
- kfree(s4985_adapter);
- s4985_adapter = NULL;
- }
- kfree(s4985_algo);
- s4985_algo = NULL;
-
- /* Restore physical bus */
- if (i2c_add_adapter(nforce2_smbus))
- printk(KERN_ERR "i2c-nforce2-s4985: "
- "Physical bus restoration failed\n");
-}
-
-MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
-MODULE_DESCRIPTION("S4985 SMBus multiplexing");
-MODULE_LICENSE("GPL");
-
-module_init(nforce2_s4985_init);
-module_exit(nforce2_s4985_exit);
@@ -117,20 +117,6 @@ static const struct dmi_system_id nforce
static struct pci_driver nforce2_driver;
-/* For multiplexing support, we need a global reference to the 1st
- SMBus channel */
-#if IS_ENABLED(CONFIG_I2C_NFORCE2_S4985)
-struct i2c_adapter *nforce2_smbus;
-EXPORT_SYMBOL_GPL(nforce2_smbus);
-
-static void nforce2_set_reference(struct i2c_adapter *adap)
-{
- nforce2_smbus = adap;
-}
-#else
-static inline void nforce2_set_reference(struct i2c_adapter *adap) { }
-#endif
-
static void nforce2_abort(struct i2c_adapter *adap)
{
struct nforce2_smbus *smbus = adap->algo_data;
@@ -411,7 +397,6 @@ static int nforce2_probe(struct pci_dev
return -ENODEV;
}
- nforce2_set_reference(&smbuses[0].adapter);
return 0;
}
@@ -420,7 +405,6 @@ static void nforce2_remove(struct pci_de
{
struct nforce2_smbus *smbuses = pci_get_drvdata(dev);
- nforce2_set_reference(NULL);
if (smbuses[0].base) {
i2c_del_adapter(&smbuses[0].adapter);
release_region(smbuses[0].base, smbuses[0].size);
The i2c-amd756-s4882 and i2c-nforce2-s4985 muxing pseudo-drivers were written at a time when the i2c core did not support muxing. They are essentially board-specific hacks. If we had to add support for these boards today, we would implement it in a completely different way. These Tyan server boards are 19 years old by now, so I very much doubt any of these is still running today. So let's just drop this clumsy code. If anyone really still needs this support and complains, I'll rewrite it in a proper way on top of i2c-mux. This also fixes the following warnings: drivers/i2c/busses/i2c-amd756.c:286:20: warning: symbol 'amd756_smbus' was not declared. Should it be static? drivers/i2c/busses/i2c-nforce2.c:123:20: warning: symbol 'nforce2_smbus' was not declared. Should it be static? Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Andi Shyti <andi.shyti@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> --- Changes in v3: * Bump the year count in the description. * Rebased on top of v6.12-rc4. Changes in v2: * Added Nick's ack. * Rebased on top of v6.6-rc3. MAINTAINERS | 2 drivers/i2c/busses/Kconfig | 26 --- drivers/i2c/busses/Makefile | 2 drivers/i2c/busses/i2c-amd756-s4882.c | 245 --------------------------------- drivers/i2c/busses/i2c-amd756.c | 4 drivers/i2c/busses/i2c-nforce2-s4985.c | 240 -------------------------------- drivers/i2c/busses/i2c-nforce2.c | 16 -- 7 files changed, 1 insertion(+), 534 deletions(-)