diff mbox series

[v3,1/3] arm64: dts: qcom: x1e80100: Describe the SDHC controllers

Message ID 20241022-x1e80100-qcp-sdhc-v3-1-46c401e32cbf@linaro.org
State New
Headers show
Series arm64: dts: qcom: x1e80100: Describe SDCs and enable support on QCP | expand

Commit Message

Abel Vesa Oct. 22, 2024, 10:46 a.m. UTC 
Describe the two SHDC v5 controllers found on x1e80100 platform.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 arch/arm64/boot/dts/qcom/x1e80100.dtsi | 102 +++++++++++++++++++++++++++++++++
 1 file changed, 102 insertions(+)

Comments

Konrad Dybcio Oct. 25, 2024, 6:33 p.m. UTC | #1 
On 22.10.2024 12:46 PM, Abel Vesa wrote:
> Describe the two SHDC v5 controllers found on x1e80100 platform.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/x1e80100.dtsi | 102 +++++++++++++++++++++++++++++++++
>  1 file changed, 102 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> index 0e6802c1d2d8375987c614ec69c440e2f38d25c6..2d0befd6ba0ea11fdf2305d23c0cd8743de303dc 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> @@ -3887,6 +3887,108 @@ lpass_lpicx_noc: interconnect@7430000 {
>  			#interconnect-cells = <2>;
>  		};
>  
> +		sdhc_2: mmc@8804000 {
> +			compatible = "qcom,x1e80100-sdhci", "qcom,sdhci-msm-v5";
> +			reg = <0 0x08804000 0 0x1000>;
> +
> +			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "hc_irq", "pwr_irq";
> +
> +			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
> +				 <&gcc GCC_SDCC2_APPS_CLK>,
> +				 <&rpmhcc RPMH_CXO_CLK>;
> +			clock-names = "iface", "core", "xo";
> +			iommus = <&apps_smmu 0x520 0>;
> +			qcom,dll-config = <0x0007642c>;
> +			qcom,ddr-config = <0x80040868>;
> +			power-domains = <&rpmhpd RPMHPD_CX>;
> +			operating-points-v2 = <&sdhc2_opp_table>;
> +
> +			interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,

QCOM_ICC_TAG_ALWAYS

> +					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;

QCOM_ICC_TAG_ACTIVE_ONLY (this is a CPU-x path)

for both nodes

Konrad
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index 0e6802c1d2d8375987c614ec69c440e2f38d25c6..2d0befd6ba0ea11fdf2305d23c0cd8743de303dc 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -3887,6 +3887,108 @@  lpass_lpicx_noc: interconnect@7430000 {
 			#interconnect-cells = <2>;
 		};
 
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,x1e80100-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			iommus = <&apps_smmu 0x520 0>;
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+
+			interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
+			interconnect-names = "sdhc-ddr", "cpu-sdhc";
+			bus-width = <4>;
+			dma-coherent;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
+		sdhc_4: mmc@8844000 {
+			compatible = "qcom,x1e80100-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08844000 0 0x1000>;
+
+			interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC4_AHB_CLK>,
+				 <&gcc GCC_SDCC4_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			iommus = <&apps_smmu 0x160 0>;
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc4_opp_table>;
+
+			interconnects = <&aggre2_noc MASTER_SDCC_4 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_4 0>;
+			interconnect-names = "sdhc-ddr", "cpu-sdhc";
+			bus-width = <4>;
+			dma-coherent;
+
+			status = "disabled";
+
+			sdhc4_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
 		usb_2_hsphy: phy@88e0000 {
 			compatible = "qcom,x1e80100-snps-eusb2-phy",
 				     "qcom,sm8550-snps-eusb2-phy";