diff mbox series

soc: qcom: llcc: Flip the manual slice configuration condition

Message ID 20241104-topic-llcc_flip-v1-1-3003c846d131@oss.qualcomm.com
State New
Headers show
Series soc: qcom: llcc: Flip the manual slice configuration condition | expand

Commit Message

Konrad Dybcio Nov. 4, 2024, 3:10 p.m. UTC 
From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Commit c14e64b46944 ("soc: qcom: llcc: Support chipsets that can write
to llcc") made the code not configure certain registers on SDM845 due
to firmware security policies. That turned out only to concern SDM845,
but the condition was chosen such that all other entries (for SoCs that
didnot need it) were required to set .need_llcc_cfg = true.

Flip the condition, so the default is "doesn't need the workaround".

Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
 drivers/soc/qcom/llcc-qcom.c | 25 ++++---------------------
 1 file changed, 4 insertions(+), 21 deletions(-)


---
base-commit: 1ffec08567f426a1c593e038cadc61bdc38cb467
change-id: 20241104-topic-llcc_flip-c8720c56b7f2

Best regards,

Comments

Bjorn Andersson Nov. 6, 2024, 12:53 a.m. UTC | #1 
On Mon, 04 Nov 2024 16:10:53 +0100, Konrad Dybcio wrote:
> Commit c14e64b46944 ("soc: qcom: llcc: Support chipsets that can write
> to llcc") made the code not configure certain registers on SDM845 due
> to firmware security policies. That turned out only to concern SDM845,
> but the condition was chosen such that all other entries (for SoCs that
> didnot need it) were required to set .need_llcc_cfg = true.
> 
> Flip the condition, so the default is "doesn't need the workaround".
> 
> [...]

Applied, thanks!

[1/1] soc: qcom: llcc: Flip the manual slice configuration condition
      commit: 92f3397c8c8d63fefe0d045425ad54c5ee5d57bb

Best regards,
diff mbox series

Patch

diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
index a470285f54a875bf2262aac7b0f84ed8fd028ef1..560c2e5d0b6bbaca32a7cc54fd086b22017be22a 100644
--- a/drivers/soc/qcom/llcc-qcom.c
+++ b/drivers/soc/qcom/llcc-qcom.c
@@ -137,7 +137,7 @@  struct qcom_llcc_config {
 	const u32 *reg_offset;
 	const struct llcc_edac_reg_offset *edac_reg_offset;
 	int size;
-	bool need_llcc_cfg;
+	bool skip_llcc_cfg;
 	bool no_edac;
 	bool irq_configured;
 };
@@ -2650,28 +2650,24 @@  static const struct qcom_llcc_config qdu1000_cfg[] = {
 	{
 		.sct_data       = qdu1000_data_8ch,
 		.size		= ARRAY_SIZE(qdu1000_data_8ch),
-		.need_llcc_cfg	= true,
 		.reg_offset	= llcc_v2_1_reg_offset,
 		.edac_reg_offset = &llcc_v2_1_edac_reg_offset,
 	},
 	{
 		.sct_data       = qdu1000_data_4ch,
 		.size           = ARRAY_SIZE(qdu1000_data_4ch),
-		.need_llcc_cfg  = true,
 		.reg_offset     = llcc_v2_1_reg_offset,
 		.edac_reg_offset = &llcc_v2_1_edac_reg_offset,
 	},
 	{
 		.sct_data       = qdu1000_data_4ch,
 		.size           = ARRAY_SIZE(qdu1000_data_4ch),
-		.need_llcc_cfg  = true,
 		.reg_offset     = llcc_v2_1_reg_offset,
 		.edac_reg_offset = &llcc_v2_1_edac_reg_offset,
 	},
 	{
 		.sct_data       = qdu1000_data_2ch,
 		.size           = ARRAY_SIZE(qdu1000_data_2ch),
-		.need_llcc_cfg  = true,
 		.reg_offset     = llcc_v2_1_reg_offset,
 		.edac_reg_offset = &llcc_v2_1_edac_reg_offset,
 	},
@@ -2681,7 +2677,6 @@  static const struct qcom_llcc_config sa8775p_cfg[] = {
 	{
 		.sct_data	= sa8775p_data,
 		.size		= ARRAY_SIZE(sa8775p_data),
-		.need_llcc_cfg	= true,
 		.reg_offset	= llcc_v2_1_reg_offset,
 		.edac_reg_offset = &llcc_v2_1_edac_reg_offset,
 	},
@@ -2691,7 +2686,6 @@  static const struct qcom_llcc_config sc7180_cfg[] = {
 	{
 		.sct_data	= sc7180_data,
 		.size		= ARRAY_SIZE(sc7180_data),
-		.need_llcc_cfg	= true,
 		.reg_offset	= llcc_v1_reg_offset,
 		.edac_reg_offset = &llcc_v1_edac_reg_offset,
 	},
@@ -2701,7 +2695,6 @@  static const struct qcom_llcc_config sc7280_cfg[] = {
 	{
 		.sct_data	= sc7280_data,
 		.size		= ARRAY_SIZE(sc7280_data),
-		.need_llcc_cfg	= true,
 		.reg_offset	= llcc_v1_reg_offset,
 		.edac_reg_offset = &llcc_v1_edac_reg_offset,
 	},
@@ -2711,7 +2704,6 @@  static const struct qcom_llcc_config sc8180x_cfg[] = {
 	{
 		.sct_data	= sc8180x_data,
 		.size		= ARRAY_SIZE(sc8180x_data),
-		.need_llcc_cfg	= true,
 		.reg_offset	= llcc_v1_reg_offset,
 		.edac_reg_offset = &llcc_v1_edac_reg_offset,
 	},
@@ -2721,7 +2713,6 @@  static const struct qcom_llcc_config sc8280xp_cfg[] = {
 	{
 		.sct_data	= sc8280xp_data,
 		.size		= ARRAY_SIZE(sc8280xp_data),
-		.need_llcc_cfg	= true,
 		.reg_offset	= llcc_v1_reg_offset,
 		.edac_reg_offset = &llcc_v1_edac_reg_offset,
 	},
@@ -2731,7 +2722,7 @@  static const struct qcom_llcc_config sdm845_cfg[] = {
 	{
 		.sct_data	= sdm845_data,
 		.size		= ARRAY_SIZE(sdm845_data),
-		.need_llcc_cfg	= false,
+		.skip_llcc_cfg	= true,
 		.reg_offset	= llcc_v1_reg_offset,
 		.edac_reg_offset = &llcc_v1_edac_reg_offset,
 		.no_edac	= true,
@@ -2742,7 +2733,6 @@  static const struct qcom_llcc_config sm6350_cfg[] = {
 	{
 		.sct_data	= sm6350_data,
 		.size		= ARRAY_SIZE(sm6350_data),
-		.need_llcc_cfg	= true,
 		.reg_offset	= llcc_v1_reg_offset,
 		.edac_reg_offset = &llcc_v1_edac_reg_offset,
 	},
@@ -2752,7 +2742,6 @@  static const struct qcom_llcc_config sm7150_cfg[] = {
 	{
 		.sct_data       = sm7150_data,
 		.size           = ARRAY_SIZE(sm7150_data),
-		.need_llcc_cfg	= true,
 		.reg_offset	= llcc_v1_reg_offset,
 		.edac_reg_offset = &llcc_v1_edac_reg_offset,
 	},
@@ -2762,7 +2751,6 @@  static const struct qcom_llcc_config sm8150_cfg[] = {
 	{
 		.sct_data       = sm8150_data,
 		.size           = ARRAY_SIZE(sm8150_data),
-		.need_llcc_cfg	= true,
 		.reg_offset	= llcc_v1_reg_offset,
 		.edac_reg_offset = &llcc_v1_edac_reg_offset,
 	},
@@ -2772,7 +2760,6 @@  static const struct qcom_llcc_config sm8250_cfg[] = {
 	{
 		.sct_data       = sm8250_data,
 		.size           = ARRAY_SIZE(sm8250_data),
-		.need_llcc_cfg	= true,
 		.reg_offset	= llcc_v1_reg_offset,
 		.edac_reg_offset = &llcc_v1_edac_reg_offset,
 	},
@@ -2782,7 +2769,6 @@  static const struct qcom_llcc_config sm8350_cfg[] = {
 	{
 		.sct_data       = sm8350_data,
 		.size           = ARRAY_SIZE(sm8350_data),
-		.need_llcc_cfg	= true,
 		.reg_offset	= llcc_v1_reg_offset,
 		.edac_reg_offset = &llcc_v1_edac_reg_offset,
 	},
@@ -2792,7 +2778,6 @@  static const struct qcom_llcc_config sm8450_cfg[] = {
 	{
 		.sct_data       = sm8450_data,
 		.size           = ARRAY_SIZE(sm8450_data),
-		.need_llcc_cfg	= true,
 		.reg_offset	= llcc_v2_1_reg_offset,
 		.edac_reg_offset = &llcc_v2_1_edac_reg_offset,
 	},
@@ -2802,7 +2787,6 @@  static const struct qcom_llcc_config sm8550_cfg[] = {
 	{
 		.sct_data       = sm8550_data,
 		.size           = ARRAY_SIZE(sm8550_data),
-		.need_llcc_cfg	= true,
 		.reg_offset	= llcc_v2_1_reg_offset,
 		.edac_reg_offset = &llcc_v2_1_edac_reg_offset,
 	},
@@ -2812,7 +2796,6 @@  static const struct qcom_llcc_config sm8650_cfg[] = {
 	{
 		.sct_data       = sm8650_data,
 		.size           = ARRAY_SIZE(sm8650_data),
-		.need_llcc_cfg	= true,
 		.reg_offset	= llcc_v2_1_reg_offset,
 		.edac_reg_offset = &llcc_v2_1_edac_reg_offset,
 	},
@@ -2822,7 +2805,6 @@  static const struct qcom_llcc_config x1e80100_cfg[] = {
 	{
 		.sct_data	= x1e80100_data,
 		.size		= ARRAY_SIZE(x1e80100_data),
-		.need_llcc_cfg	= true,
 		.reg_offset	= llcc_v2_1_reg_offset,
 		.edac_reg_offset = &llcc_v2_1_edac_reg_offset,
 		.irq_configured = true,
@@ -3175,7 +3157,8 @@  static int _qcom_llcc_cfg_program(const struct llcc_slice_config *config,
 			return ret;
 	}
 
-	if (cfg->need_llcc_cfg) {
+	/* At least SDM845 disallows non-secure writes to these registers */
+	if (!cfg->skip_llcc_cfg) {
 		u32 disable_cap_alloc, retain_pc;
 
 		disable_cap_alloc = config->dis_cap_alloc << config->slice_id;