[v4,2/3] media: dt-bindings: Add qcom,msm8953-camss

Add bindings for qcom,msm8953-camss in order to support the camera
subsystem for MSM8953.

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
 .../bindings/media/qcom,msm8953-camss.yaml         | 322 +++++++++++++++++++++
 1 file changed, 322 insertions(+)

On 11/3/24 11:45, Barnabás Czémán wrote:
> Add bindings for qcom,msm8953-camss in order to support the camera
> subsystem for MSM8953.
> 
> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
> ---
>   .../bindings/media/qcom,msm8953-camss.yaml         | 322 +++++++++++++++++++++
>   1 file changed, 322 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/media/qcom,msm8953-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8953-camss.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..8856fba385b1123d748199b46c5009c97700ad9b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/qcom,msm8953-camss.yaml
> @@ -0,0 +1,322 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/qcom,msm8953-camss.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm MSM8953 Camera Subsystem (CAMSS)
> +
> +maintainers:
> +  - Barnabas Czeman <barnabas.czeman@mainlining.org>
> +
> +description:
> +  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
> +
> +properties:
> +  compatible:
> +    const: qcom,msm8953-camss
> +
> +  clocks:
> +    minItems: 30
> +    maxItems: 30
> +
> +  clock-names:
> +    items:
> +      - const: ahb
> +      - const: csi0
> +      - const: csi0_ahb
> +      - const: csi0_phy
> +      - const: csi0_pix
> +      - const: csi0_rdi
> +      - const: csi1
> +      - const: csi1_ahb
> +      - const: csi1_phy
> +      - const: csi1_pix
> +      - const: csi1_rdi
> +      - const: csi2
> +      - const: csi2_ahb
> +      - const: csi2_phy
> +      - const: csi2_pix
> +      - const: csi2_rdi
> +      - const: csi_vfe0
> +      - const: csi_vfe1
> +      - const: csiphy0_timer
> +      - const: csiphy1_timer
> +      - const: csiphy2_timer
> +      - const: ispif_ahb
> +      - const: micro_ahb
> +      - const: top_ahb
> +      - const: vfe0
> +      - const: vfe0_ahb
> +      - const: vfe0_axi
> +      - const: vfe1
> +      - const: vfe1_ahb
> +      - const: vfe1_axi
> +
> +  interrupts:
> +    minItems: 9
> +    maxItems: 9
> +
> +  interrupt-names:
> +    items:
> +      - const: csid0
> +      - const: csid1
> +      - const: csid2
> +      - const: csiphy0
> +      - const: csiphy1
> +      - const: csiphy2
> +      - const: ispif
> +      - const: vfe0
> +      - const: vfe1
> +
> +  iommus:
> +    maxItems: 1
> +
> +  power-domains:
> +    items:
> +      - description: VFE0 GDSC - Video Front End, Global Distributed Switch Controller.
> +      - description: VFE1 GDSC - Video Front End, Global Distributed Switch Controller.
> +
> +  power-domain-names:
> +    items:
> +      - const: vfe0
> +      - const: vfe1
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    description:
> +      CSI input ports.
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port for receiving CSI data.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                description:
> +                  An array of physical data lanes indexes.
> +                  Position of an entry determines the logical
> +                  lane number, while the value of an entry
> +                  indicates physical lane index. Lane swapping
> +                  is supported. Physical lane indexes;
> +                  0, 2, 3, 4.

Drop the rewritten description, it's given in the referenced above
video-interfaces.yaml

And that 0, 2, 3, 4 array is invalid apparently. Lane 4 is the clock lane.

> +                minItems: 1
> +                maxItems: 4
> +
> +            required:
> +              - data-lanes
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port for receiving CSI data.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +
> +            required:
> +              - data-lanes
> +
> +      port@2:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port for receiving CSI data.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +
> +            required:
> +              - data-lanes
> +
> +  reg:
> +    minItems: 13
> +    maxItems: 13
> +
> +  reg-names:
> +    items:
> +      - const: csi_clk_mux
> +      - const: csid0
> +      - const: csid1
> +      - const: csid2
> +      - const: csiphy0
> +      - const: csiphy0_clk_mux
> +      - const: csiphy1
> +      - const: csiphy1_clk_mux
> +      - const: csiphy2
> +      - const: csiphy2_clk_mux
> +      - const: ispif
> +      - const: vfe0
> +      - const: vfe1
> +
> +  vdda-supply:
> +    description:
> +      Definition of the regulator used as analog power supply.

Is there such a thing as "analog power supply" in general, and
in connection to CAMSS PHY in particular?

I believe it was just wrongly copied from somewhere. Instead please
explicitly specify that it's a CAMSS CSIPHY supply and provide its
expected voltage level in the description.

> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - clocks
> +  - clock-names
> +  - interrupts
> +  - interrupt-names
> +  - iommus
> +  - power-domains
> +  - power-domain-names
> +  - vdda-supply
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/qcom,gcc-msm8953.h>
> +
> +    camss: camss@1b00020 {
> +        compatible = "qcom,msm8953-camss";
> +
> +        reg = <0x1b00020 0x10>,
> +              <0x1b30000 0x100>,
> +              <0x1b30400 0x100>,
> +              <0x1b30800 0x100>,
> +              <0x1b34000 0x1000>,
> +              <0x1b00030 0x4>,
> +              <0x1b35000 0x1000>,
> +              <0x1b00038 0x4>,
> +              <0x1b36000 0x1000>,
> +              <0x1b00040 0x4>,
> +              <0x1b31000 0x500>,
> +              <0x1b10000 0x1000>,
> +              <0x1b14000 0x1000>;
> +        reg-names = "csi_clk_mux",
> +                    "csid0",
> +                    "csid1",
> +                    "csid2",
> +                    "csiphy0",
> +                    "csiphy0_clk_mux",
> +                    "csiphy1",
> +                    "csiphy1_clk_mux",
> +                    "csiphy2",
> +                    "csiphy2_clk_mux",
> +                    "ispif",
> +                    "vfe0",
> +                    "vfe1";
> +
> +        clocks = <&gcc GCC_CAMSS_AHB_CLK>,
> +                 <&gcc GCC_CAMSS_CSI0_CLK>,
> +                 <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
> +                 <&gcc GCC_CAMSS_CSI0PHY_CLK>,
> +                 <&gcc GCC_CAMSS_CSI0PIX_CLK>,
> +                 <&gcc GCC_CAMSS_CSI0RDI_CLK>,
> +                 <&gcc GCC_CAMSS_CSI1_CLK>,
> +                 <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
> +                 <&gcc GCC_CAMSS_CSI1PHY_CLK>,
> +                 <&gcc GCC_CAMSS_CSI1PIX_CLK>,
> +                 <&gcc GCC_CAMSS_CSI1RDI_CLK>,
> +                 <&gcc GCC_CAMSS_CSI2_CLK>,
> +                 <&gcc GCC_CAMSS_CSI2_AHB_CLK>,
> +                 <&gcc GCC_CAMSS_CSI2PHY_CLK>,
> +                 <&gcc GCC_CAMSS_CSI2PIX_CLK>,
> +                 <&gcc GCC_CAMSS_CSI2RDI_CLK>,
> +                 <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
> +                 <&gcc GCC_CAMSS_CSI_VFE1_CLK>,
> +                 <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
> +                 <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
> +                 <&gcc GCC_CAMSS_CSI2PHYTIMER_CLK>,
> +                 <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
> +                 <&gcc GCC_CAMSS_MICRO_AHB_CLK>,
> +                 <&gcc GCC_CAMSS_TOP_AHB_CLK>,
> +                 <&gcc GCC_CAMSS_VFE0_CLK>,
> +                 <&gcc GCC_CAMSS_VFE0_AHB_CLK>,
> +                 <&gcc GCC_CAMSS_VFE0_AXI_CLK>,
> +                 <&gcc GCC_CAMSS_VFE1_CLK>,
> +                 <&gcc GCC_CAMSS_VFE1_AHB_CLK>,
> +                 <&gcc GCC_CAMSS_VFE1_AXI_CLK>;
> +        clock-names = "ahb",
> +                      "csi0",
> +                      "csi0_ahb",
> +                      "csi0_phy",
> +                      "csi0_pix",
> +                      "csi0_rdi",
> +                      "csi1",
> +                      "csi1_ahb",
> +                      "csi1_phy",
> +                      "csi1_pix",
> +                      "csi1_rdi",
> +                      "csi2",
> +                      "csi2_ahb",
> +                      "csi2_phy",
> +                      "csi2_pix",
> +                      "csi2_rdi",
> +                      "csi_vfe0",
> +                      "csi_vfe1",
> +                      "csiphy0_timer",
> +                      "csiphy1_timer",
> +                      "csiphy2_timer",
> +                      "ispif_ahb",
> +                      "micro_ahb",
> +                      "top_ahb",
> +                      "vfe0",
> +                      "vfe0_ahb",
> +                      "vfe0_axi",
> +                      "vfe1",
> +                      "vfe1_ahb",
> +                      "vfe1_axi";
> +
> +        interrupts = <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
> +        interrupt-names = "csid0",
> +                          "csid1",
> +                          "csid2",
> +                          "csiphy0",
> +                          "csiphy1",
> +                          "csiphy2",
> +                          "ispif",
> +                          "vfe0",
> +                          "vfe1";
> +
> +        iommus = <&apps_iommu 0x14>;
> +
> +        power-domains = <&gcc VFE0_GDSC>,
> +                        <&gcc VFE1_GDSC>;
> +        power-domain-names = "vfe0", "vfe1";
> +
> +        vdda-supply = <&reg_2v8>;
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +        };
> +    };
> 

--
Best wishes,
Vladimir