| Message ID | 20241106193413.1730413-29-quic_wcheng@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | Introduce QC USB SND audio offloading support | expand |
On Wed, 06 Nov 2024 20:34:11 +0100, Wesley Cheng wrote: > > In order to allow userspace/applications know about USB offloading status, > expose a sound kcontrol that fetches information about which sound card > and PCM index the USB device is mapped to for supporting offloading. In > the USB audio offloading framework, the ASoC BE DAI link is the entity > responsible for registering to the SOC USB layer. > > It is expected for the USB SND offloading driver to add the kcontrol to the > sound card associated with the USB audio device. An example output would > look like: > > tinymix -D 1 get 'USB Offload Playback Route PCM#0' > -1, -1 (range -1->255) > > This example signifies that there is no mapped ASoC path available for the > USB SND device. > > tinymix -D 1 get 'USB Offload Playback Route PCM#0' > 0, 0 (range -1->255) > > This example signifies that the offload path is available over ASoC sound > card index#0 and PCM device#0. > > The USB offload kcontrol will be added in addition to the existing > kcontrols identified by the USB SND mixer. The kcontrols used to modify > the USB audio device specific parameters are still valid and expected to be > used. These parameters are not mirrored to the ASoC subsystem. > > Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> IIRC, this representation of kcontrol was one argued issue; Pierre expressed the concern about the complexity of the kcontrol. I didn't follow exactly, but did we get consensus? Apart from that: the Kconfig defition below ... > +config SND_USB_OFFLOAD_MIXER > + tristate "USB Audio Offload mixer control" > + help > + Say Y to enable the USB audio offloading mixer controls. This > + exposes an USB offload capable kcontrol to signal to applications > + about which platform sound card can support USB audio offload. > + The returning values specify the mapped ASoC card and PCM device > + the USB audio device is associated to. ... and Makefile addition below ... > --- a/sound/usb/Makefile > +++ b/sound/usb/Makefile > @@ -36,3 +36,5 @@ obj-$(CONFIG_SND_USB_US122L) += snd-usbmidi-lib.o > > obj-$(CONFIG_SND) += misc/ usx2y/ caiaq/ 6fire/ hiface/ bcd2000/ qcom/ > obj-$(CONFIG_SND_USB_LINE6) += line6/ > + > +obj-$(CONFIG_SND_USB_OFFLOAD_MIXER) += mixer_usb_offload.o ... indicates that this code will be an individual module, although it's solely used from snd-usb-audio-qmi driver. This should be rather a boolean and moved to sound/usb/qcom/, and linked to snd-usb-audio-qmi driver itself, e.g. --- a/sound/usb/qcom/Makefile +++ b/sound/usb/qcom/Makefile @@ -1,2 +1,3 @@ snd-usb-audio-qmi-objs := usb_audio_qmi_v01.o qc_audio_offload.o +snd-usb-audio-qmi-$(CONFIG_SND_USB_OFFLOAD_MIXER) += mixer_usb_offload.o obj-$(CONFIG_SND_USB_AUDIO_QMI) += snd-usb-audio-qmi.o Then you can drop EXPORT_SYMBOL_GPL(), too. thanks, Takashi
Hi Takashi, On 11/20/2024 4:12 AM, Takashi Iwai wrote: > On Wed, 06 Nov 2024 20:34:11 +0100, > Wesley Cheng wrote: >> In order to allow userspace/applications know about USB offloading status, >> expose a sound kcontrol that fetches information about which sound card >> and PCM index the USB device is mapped to for supporting offloading. In >> the USB audio offloading framework, the ASoC BE DAI link is the entity >> responsible for registering to the SOC USB layer. >> >> It is expected for the USB SND offloading driver to add the kcontrol to the >> sound card associated with the USB audio device. An example output would >> look like: >> >> tinymix -D 1 get 'USB Offload Playback Route PCM#0' >> -1, -1 (range -1->255) >> >> This example signifies that there is no mapped ASoC path available for the >> USB SND device. >> >> tinymix -D 1 get 'USB Offload Playback Route PCM#0' >> 0, 0 (range -1->255) >> >> This example signifies that the offload path is available over ASoC sound >> card index#0 and PCM device#0. >> >> The USB offload kcontrol will be added in addition to the existing >> kcontrols identified by the USB SND mixer. The kcontrols used to modify >> the USB audio device specific parameters are still valid and expected to be >> used. These parameters are not mirrored to the ASoC subsystem. >> >> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> > IIRC, this representation of kcontrol was one argued issue; Pierre > expressed the concern about the complexity of the kcontrol. > I didn't follow exactly, but did we get consensus? So the part that Pierre had concerns on was that previously, the implementation was placing offload kcontrols to the ASoC platform card, and had some additional controls that complicated the offload implementation about the offload status for each USB audio device. This was discussed here: https://lore.kernel.org/linux-usb/957b3c13-e4ba-45e3-b880-7a313e48c33f@quicinc.com/ To summarize, I made the decision to move the offload status kcontrols from ASoC --> USB SND and limited it to only one kcontrol (mapped offload device). So now, there exists a kcontrol for every USB SND device (if the offload mixer is enabled), where it tells userspace the mapped ASoC platform card and pcm device that handles USB offloading, else you'll see the "-1, -1" pair, which means offload is not possible for that USB audio device. > Apart from that: the Kconfig defition below ... > >> +config SND_USB_OFFLOAD_MIXER >> + tristate "USB Audio Offload mixer control" >> + help >> + Say Y to enable the USB audio offloading mixer controls. This >> + exposes an USB offload capable kcontrol to signal to applications >> + about which platform sound card can support USB audio offload. >> + The returning values specify the mapped ASoC card and PCM device >> + the USB audio device is associated to. > ... and Makefile addition below ... > >> --- a/sound/usb/Makefile >> +++ b/sound/usb/Makefile >> @@ -36,3 +36,5 @@ obj-$(CONFIG_SND_USB_US122L) += snd-usbmidi-lib.o >> >> obj-$(CONFIG_SND) += misc/ usx2y/ caiaq/ 6fire/ hiface/ bcd2000/ qcom/ >> obj-$(CONFIG_SND_USB_LINE6) += line6/ >> + >> +obj-$(CONFIG_SND_USB_OFFLOAD_MIXER) += mixer_usb_offload.o > ... indicates that this code will be an individual module, although > it's solely used from snd-usb-audio-qmi driver. This should be rather > a boolean and moved to sound/usb/qcom/, and linked to > snd-usb-audio-qmi driver itself, e.g. > > --- a/sound/usb/qcom/Makefile > +++ b/sound/usb/qcom/Makefile > @@ -1,2 +1,3 @@ > snd-usb-audio-qmi-objs := usb_audio_qmi_v01.o qc_audio_offload.o > +snd-usb-audio-qmi-$(CONFIG_SND_USB_OFFLOAD_MIXER) += mixer_usb_offload.o > obj-$(CONFIG_SND_USB_AUDIO_QMI) += snd-usb-audio-qmi.o > > Then you can drop EXPORT_SYMBOL_GPL(), too. Had a discussion with Pierre on this too below. https://lore.kernel.org/linux-usb/f507a228-4865-4df5-9215-bc59e330a82f@linux.intel.com/ I remember you commenting to place it in this vendor offload module, which is what I did on v24. Thanks Wesley Cheng
diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig index d0f65311894f..4994e6261be5 100644 --- a/sound/usb/Kconfig +++ b/sound/usb/Kconfig @@ -176,10 +176,20 @@ config SND_BCD2000 To compile this driver as a module, choose M here: the module will be called snd-bcd2000. +config SND_USB_OFFLOAD_MIXER + tristate "USB Audio Offload mixer control" + help + Say Y to enable the USB audio offloading mixer controls. This + exposes an USB offload capable kcontrol to signal to applications + about which platform sound card can support USB audio offload. + The returning values specify the mapped ASoC card and PCM device + the USB audio device is associated to. + config SND_USB_AUDIO_QMI tristate "Qualcomm Audio Offload driver" depends on QCOM_QMI_HELPERS && SND_USB_AUDIO && USB_XHCI_SEC_INTR && SND_SOC_USB select SND_PCM + select SND_USB_OFFLOAD_MIXER help Say Y here to enable the Qualcomm USB audio offloading feature. diff --git a/sound/usb/Makefile b/sound/usb/Makefile index 54a06a2f73ca..2f19f854944c 100644 --- a/sound/usb/Makefile +++ b/sound/usb/Makefile @@ -36,3 +36,5 @@ obj-$(CONFIG_SND_USB_US122L) += snd-usbmidi-lib.o obj-$(CONFIG_SND) += misc/ usx2y/ caiaq/ 6fire/ hiface/ bcd2000/ qcom/ obj-$(CONFIG_SND_USB_LINE6) += line6/ + +obj-$(CONFIG_SND_USB_OFFLOAD_MIXER) += mixer_usb_offload.o diff --git a/sound/usb/mixer_usb_offload.c b/sound/usb/mixer_usb_offload.c new file mode 100644 index 000000000000..e0689a3b9b86 --- /dev/null +++ b/sound/usb/mixer_usb_offload.c @@ -0,0 +1,102 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <linux/usb.h> + +#include <sound/core.h> +#include <sound/control.h> +#include <sound/soc-usb.h> + +#include "usbaudio.h" +#include "card.h" +#include "helper.h" +#include "mixer.h" + +#include "mixer_usb_offload.h" + +#define PCM_IDX(n) ((n) & 0xffff) +#define CARD_IDX(n) ((n) >> 16) + +static int +snd_usb_offload_route_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct device *sysdev = snd_kcontrol_chip(kcontrol); + int ret; + + ret = snd_soc_usb_update_offload_route(sysdev, + CARD_IDX(kcontrol->private_value), + PCM_IDX(kcontrol->private_value), + SNDRV_PCM_STREAM_PLAYBACK, + ucontrol->value.integer.value); + if (ret < 0) { + ucontrol->value.integer.value[0] = -1; + ucontrol->value.integer.value[1] = -1; + } + + return 0; +} + +static int snd_usb_offload_route_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 2; + uinfo->value.integer.min = -1; + /* Arbitrary max value, as there is no 'limit' on number of PCM devices */ + uinfo->value.integer.max = 0xff; + + return 0; +} + +static struct snd_kcontrol_new snd_usb_offload_mapped_ctl = { + .iface = SNDRV_CTL_ELEM_IFACE_CARD, + .access = SNDRV_CTL_ELEM_ACCESS_READ, + .info = snd_usb_offload_route_info, + .get = snd_usb_offload_route_get, +}; + +/** + * snd_usb_offload_create_ctl() - Add USB offload bounded mixer + * @chip - USB SND chip device + * + * Creates a sound control for a USB audio device, so that applications can + * query for if there is an available USB audio offload path, and which + * card is managing it. + */ +int snd_usb_offload_create_ctl(struct snd_usb_audio *chip) +{ + struct usb_device *udev = chip->dev; + struct snd_kcontrol_new *chip_kctl; + struct snd_usb_substream *subs; + struct snd_usb_stream *as; + char ctl_name[34]; + int ret; + + list_for_each_entry(as, &chip->pcm_list, list) { + subs = &as->substream[SNDRV_PCM_STREAM_PLAYBACK]; + if (!subs->ep_num || as->pcm_index > 0xff) + continue; + + chip_kctl = &snd_usb_offload_mapped_ctl; + chip_kctl->count = 1; + /* + * Store the associated USB SND card number and PCM index for + * the kctl. + */ + chip_kctl->private_value = as->pcm_index | + chip->card->number << 16; + sprintf(ctl_name, "USB Offload Playback Route PCM#%d", + as->pcm_index); + chip_kctl->name = ctl_name; + ret = snd_ctl_add(chip->card, snd_ctl_new1(chip_kctl, + udev->bus->sysdev)); + if (ret < 0) + break; + } + + return ret; +} +EXPORT_SYMBOL_GPL(snd_usb_offload_create_ctl); diff --git a/sound/usb/mixer_usb_offload.h b/sound/usb/mixer_usb_offload.h new file mode 100644 index 000000000000..3f6e2a8b19c8 --- /dev/null +++ b/sound/usb/mixer_usb_offload.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef __USB_OFFLOAD_MIXER_H +#define __USB_OFFLOAD_MIXER_H + +#if IS_ENABLED(CONFIG_SND_USB_OFFLOAD_MIXER) +int snd_usb_offload_create_ctl(struct snd_usb_audio *chip); +#else +static inline int snd_usb_offload_create_ctl(struct snd_usb_audio *chip) +{ + return 0; +} +#endif +#endif /* __USB_OFFLOAD_MIXER_H */ diff --git a/sound/usb/qcom/Makefile b/sound/usb/qcom/Makefile index a81c9b28d484..4005e8391ab9 100644 --- a/sound/usb/qcom/Makefile +++ b/sound/usb/qcom/Makefile @@ -1,2 +1,2 @@ snd-usb-audio-qmi-objs := usb_audio_qmi_v01.o qc_audio_offload.o -obj-$(CONFIG_SND_USB_AUDIO_QMI) += snd-usb-audio-qmi.o \ No newline at end of file +obj-$(CONFIG_SND_USB_AUDIO_QMI) += snd-usb-audio-qmi.o diff --git a/sound/usb/qcom/qc_audio_offload.c b/sound/usb/qcom/qc_audio_offload.c index 9e1c94d28461..f78cd8c504b9 100644 --- a/sound/usb/qcom/qc_audio_offload.c +++ b/sound/usb/qcom/qc_audio_offload.c @@ -36,6 +36,7 @@ #include "../helper.h" #include "../pcm.h" #include "../power.h" +#include "../mixer_usb_offload.h" #include "usb_audio_qmi_v01.h" @@ -1709,6 +1710,7 @@ static void qc_usb_audio_offload_probe(struct snd_usb_audio *chip) sdev->card_idx = chip->card->number; sdev->chip_idx = chip->index; + snd_usb_offload_create_ctl(chip); snd_soc_usb_connect(usb_get_usb_backend(udev), sdev); }
In order to allow userspace/applications know about USB offloading status, expose a sound kcontrol that fetches information about which sound card and PCM index the USB device is mapped to for supporting offloading. In the USB audio offloading framework, the ASoC BE DAI link is the entity responsible for registering to the SOC USB layer. It is expected for the USB SND offloading driver to add the kcontrol to the sound card associated with the USB audio device. An example output would look like: tinymix -D 1 get 'USB Offload Playback Route PCM#0' -1, -1 (range -1->255) This example signifies that there is no mapped ASoC path available for the USB SND device. tinymix -D 1 get 'USB Offload Playback Route PCM#0' 0, 0 (range -1->255) This example signifies that the offload path is available over ASoC sound card index#0 and PCM device#0. The USB offload kcontrol will be added in addition to the existing kcontrols identified by the USB SND mixer. The kcontrols used to modify the USB audio device specific parameters are still valid and expected to be used. These parameters are not mirrored to the ASoC subsystem. Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> --- sound/usb/Kconfig | 10 +++ sound/usb/Makefile | 2 + sound/usb/mixer_usb_offload.c | 102 ++++++++++++++++++++++++++++++ sound/usb/mixer_usb_offload.h | 17 +++++ sound/usb/qcom/Makefile | 2 +- sound/usb/qcom/qc_audio_offload.c | 2 + 6 files changed, 134 insertions(+), 1 deletion(-) create mode 100644 sound/usb/mixer_usb_offload.c create mode 100644 sound/usb/mixer_usb_offload.h