diff mbox series

[v2] Bluetooth: qca: Support downloading board ID specific NVM for WCN6855

Message ID 20241116-x13s_wcn6855_fix-v2-1-c08c298d5fbf@quicinc.com
State New
Headers show
Series [v2] Bluetooth: qca: Support downloading board ID specific NVM for WCN6855 | expand

Commit Message

quic_zijuhu Nov. 16, 2024, 3:49 p.m. UTC 
For WCN6855, board ID specific NVM needs to be downloaded once board ID
is available, but the default NVM is always downloaded currently, and
the wrong NVM causes poor RF performance which effects user experience.

Fix by downloading board ID specific NVM if board ID is available.

Cc: Bjorn Andersson <bjorande@quicinc.com>
Cc: Aiqun Yu (Maria) <quic_aiquny@quicinc.com>
Cc: Cheng Jiang <quic_chejiang@quicinc.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Cc: Steev Klimaszewski <steev@kali.org>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Fixes: 095327fede00 ("Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6855")
Cc: stable@vger.kernel.org # 6.4
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
---
Thank you Paul, Jens, Steev, Johan, Luiz for code review, various
verification, comments and suggestions. these comments and suggestions
are very good, and all of them are taken by this v2 patch.

Regarding the variant 'g', sorry for that i can say nothing due to
confidential information (CCI), but fortunately, we don't need to
care about its difference against one without 'g' from BT host
perspective, qca_get_hsp_nvm_name_generic() shows how to map BT chip
to firmware.

I will help to backport it to LTS kernels ASAP once this commit
is mainlined.
---
Changes in v2:
- Correct subject and commit message
- Temporarily add nvm fallback logic to speed up backport.
— Add fix/stable tags as suggested by Luiz and Johan
- Link to v1: https://lore.kernel.org/r/20241113-x13s_wcn6855_fix-v1-1-15af0aa2549c@quicinc.com
---
 drivers/bluetooth/btqca.c | 44 +++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 41 insertions(+), 3 deletions(-)


---
base-commit: e88b020190bf5bc3e7ce5bd8003fc39b23cc95fe
change-id: 20241113-x13s_wcn6855_fix-53c573ff7878

Best regards,

Comments

bluez.test.bot@gmail.com Nov. 16, 2024, 4:34 p.m. UTC | #1 
This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=910294

---Test result---

Test Summary:
CheckPatch                    PENDING   0.27 seconds
GitLint                       PENDING   0.26 seconds
SubjectPrefix                 PASS      0.11 seconds
BuildKernel                   PASS      26.04 seconds
CheckAllWarning               PASS      28.50 seconds
CheckSparse                   PASS      32.35 seconds
BuildKernel32                 PASS      28.73 seconds
TestRunnerSetup               PASS      455.88 seconds
TestRunner_l2cap-tester       PASS      22.26 seconds
TestRunner_iso-tester         FAIL      33.51 seconds
TestRunner_bnep-tester        PASS      5.00 seconds
TestRunner_mgmt-tester        FAIL      120.78 seconds
TestRunner_rfcomm-tester      PASS      7.87 seconds
TestRunner_sco-tester         PASS      11.71 seconds
TestRunner_ioctl-tester       PASS      8.45 seconds
TestRunner_mesh-tester        PASS      6.24 seconds
TestRunner_smp-tester         PASS      7.48 seconds
TestRunner_userchan-tester    PASS      7.67 seconds
IncrementalBuild              PENDING   0.49 seconds

Details
##############################
Test: CheckPatch - PENDING
Desc: Run checkpatch.pl script
Output:

##############################
Test: GitLint - PENDING
Desc: Run gitlint
Output:

##############################
Test: TestRunner_iso-tester - FAIL
Desc: Run iso-tester with test-runner
Output:
WARNING: possible circular locking dependency detected
Total: 124, Passed: 120 (96.8%), Failed: 0, Not Run: 4
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner
Output:
Total: 492, Passed: 487 (99.0%), Failed: 1, Not Run: 4

Failed Test Cases
LL Privacy - Add Device 7 (AL is full)               Failed       0.208 seconds
##############################
Test: IncrementalBuild - PENDING
Desc: Incremental build with the patches in the series
Output:



---
Regards,
Linux Bluetooth
Johan Hovold Nov. 18, 2024, 12:43 p.m. UTC | #2 
On Sat, Nov 16, 2024 at 07:49:23AM -0800, Zijun Hu wrote:
> For WCN6855, board ID specific NVM needs to be downloaded once board ID
> is available, but the default NVM is always downloaded currently, and
> the wrong NVM causes poor RF performance which effects user experience.
> 
> Fix by downloading board ID specific NVM if board ID is available.
> 
> Cc: Bjorn Andersson <bjorande@quicinc.com>
> Cc: Aiqun Yu (Maria) <quic_aiquny@quicinc.com>
> Cc: Cheng Jiang <quic_chejiang@quicinc.com>
> Cc: Johan Hovold <johan@kernel.org>
> Cc: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
> Cc: Steev Klimaszewski <steev@kali.org>
> Cc: Paul Menzel <pmenzel@molgen.mpg.de>

Nit: These Cc tags should typically not be here in the commit message,
and should at least not be needed for people who git-send-email will
already include because of Tested-by and Reviewed-by tags.

If they help with your workflow then perhaps you can just put them below
the cut-off (---) line.

> Fixes: 095327fede00 ("Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6855")
> Cc: stable@vger.kernel.org # 6.4
> Reviewed-by: Johan Hovold <johan+linaro@kernel.org>

When making non-trivial changes, like the addition of the fallback NVM
feature in v2, you should probably have dropped any previous Reviewed-by
tags.

The fallback handling looks good to me though (and also works as
expected).

> Tested-by: Johan Hovold <johan+linaro@kernel.org>
> Tested-by: Steev Klimaszewski <steev@kali.org>
> Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
> Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>

> Changes in v2:
> - Correct subject and commit message
> - Temporarily add nvm fallback logic to speed up backport.
> — Add fix/stable tags as suggested by Luiz and Johan
> - Link to v1: https://lore.kernel.org/r/20241113-x13s_wcn6855_fix-v1-1-15af0aa2549c@quicinc.com
 
> +download_nvm:
>  	err = qca_download_firmware(hdev, &config, soc_type, rom_ver);
>  	if (err < 0) {
>  		bt_dev_err(hdev, "QCA Failed to download NVM (%d)", err);
> +		if (err == -ENOENT && boardid != 0 &&
> +		    soc_type == QCA_WCN6855) {
> +			boardid = 0;
> +			qca_get_hsp_nvm_name_generic(&config, ver,
> +						     rom_ver, boardid);
> +			bt_dev_warn(hdev, "QCA fallback to default NVM");
> +			goto download_nvm;
> +		}
>  		return err;

If you think it's ok for people to continue using the wrong (default)
NVM file for a while still until their distros ship the board-specific
ones, then this looks good to me and should ease the transition:

[    6.125626] Bluetooth: hci0: QCA Downloading qca/hpnv21g.b8c
[    6.126730] bluetooth hci0: Direct firmware load for qca/hpnv21g.b8c failed with error -2
[    6.126826] Bluetooth: hci0: QCA Failed to request file: qca/hpnv21g.b8c (-2)
[    6.126894] Bluetooth: hci0: QCA Failed to download NVM (-2)
[    6.126951] Bluetooth: hci0: QCA fallback to default NVM
[    6.127003] Bluetooth: hci0: QCA Downloading qca/hpnv21g.bin
[    6.309322] Bluetooth: hci0: QCA setup on UART is completed

Johan
diff mbox series

Patch

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index dfbbac92242a..ddfe7e3c9b50 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -717,6 +717,29 @@  static void qca_generate_hsp_nvm_name(char *fwname, size_t max_size,
 		snprintf(fwname, max_size, "qca/hpnv%02x%s.%x", rom_ver, variant, bid);
 }
 
+static void qca_get_hsp_nvm_name_generic(struct qca_fw_config *cfg,
+					 struct qca_btsoc_version ver,
+					 u8 rom_ver, u16 bid)
+{
+	const char *variant;
+
+	/* hsp gf chip */
+	if ((le32_to_cpu(ver.soc_id) & QCA_HSP_GF_SOC_MASK) == QCA_HSP_GF_SOC_ID)
+		variant = "g";
+	else
+		variant = "";
+
+	if (bid == 0x0)
+		snprintf(cfg->fwname, sizeof(cfg->fwname), "qca/hpnv%02x%s.bin",
+			 rom_ver, variant);
+	else if (bid & 0xff00)
+		snprintf(cfg->fwname, sizeof(cfg->fwname), "qca/hpnv%02x%s.b%x",
+			 rom_ver, variant, bid);
+	else
+		snprintf(cfg->fwname, sizeof(cfg->fwname), "qca/hpnv%02x%s.b%02x",
+			 rom_ver, variant, bid);
+}
+
 static inline void qca_get_nvm_name_generic(struct qca_fw_config *cfg,
 					    const char *stem, u8 rom_ver, u16 bid)
 {
@@ -810,8 +833,15 @@  int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 	/* Give the controller some time to get ready to receive the NVM */
 	msleep(10);
 
-	if (soc_type == QCA_QCA2066 || soc_type == QCA_WCN7850)
+	switch (soc_type) {
+	case QCA_QCA2066:
+	case QCA_WCN6855:
+	case QCA_WCN7850:
 		qca_read_fw_board_id(hdev, &boardid);
+		break;
+	default:
+		break;
+	}
 
 	/* Download NVM configuration */
 	config.type = TLV_TYPE_NVM;
@@ -848,8 +878,7 @@  int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 				 "qca/msnv%02x.bin", rom_ver);
 			break;
 		case QCA_WCN6855:
-			snprintf(config.fwname, sizeof(config.fwname),
-				 "qca/hpnv%02x.bin", rom_ver);
+			qca_get_hsp_nvm_name_generic(&config, ver, rom_ver, boardid);
 			break;
 		case QCA_WCN7850:
 			qca_get_nvm_name_generic(&config, "hmt", rom_ver, boardid);
@@ -861,9 +890,18 @@  int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 		}
 	}
 
+download_nvm:
 	err = qca_download_firmware(hdev, &config, soc_type, rom_ver);
 	if (err < 0) {
 		bt_dev_err(hdev, "QCA Failed to download NVM (%d)", err);
+		if (err == -ENOENT && boardid != 0 &&
+		    soc_type == QCA_WCN6855) {
+			boardid = 0;
+			qca_get_hsp_nvm_name_generic(&config, ver,
+						     rom_ver, boardid);
+			bt_dev_warn(hdev, "QCA fallback to default NVM");
+			goto download_nvm;
+		}
 		return err;
 	}