diff mbox series

USB: serial: option: add Netprisma LCUK54 modules for WWAN Ready

Message ID PH7PR22MB303872054FB63DF3CE715EBCE6232@PH7PR22MB3038.namprd22.prod.outlook.com
State New
Headers show
Series USB: serial: option: add Netprisma LCUK54 modules for WWAN Ready | expand

Commit Message

Mank Wang Nov. 22, 2024, 9:06 a.m. UTC 
LCUK54-WRD's pid/vid
0x3731/0x010A
0x3731/0x010C

LCUK54-WWD's pid/vid
0x3731/0x010B
0x3731/0x010D

Above products use the exact same interface layout and option
driver:
MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL

T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  5 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=3731 ProdID=0101 Rev= 5.04
S:  Manufacturer=NetPrisma
S:  Product=LCUK54-WRD
S:  SerialNumber=feeba631
C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E:  Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Mank Wang <mank.wang@netprisma.com>
---
 drivers/usb/serial/option.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

Comments

Johan Hovold Dec. 11, 2024, 9:13 a.m. UTC | #1 
On Fri, Nov 22, 2024 at 09:06:00AM +0000, Mank Wang wrote:
> LCUK54-WRD's pid/vid
> 0x3731/0x010A
> 0x3731/0x010C
> 
> LCUK54-WWD's pid/vid
> 0x3731/0x010B
> 0x3731/0x010D
> 
> Above products use the exact same interface layout and option
> driver:
> MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL

> Signed-off-by: Mank Wang <mank.wang@netprisma.com>

Now applied, thanks.

Johan
diff mbox series

Patch

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 9ba5584061c8..8acaa7d89493 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2375,6 +2375,18 @@  static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0116, 0xff, 0xff, 0x30) },	/* NetPrisma LCUK54-WWD for Golbal EDU */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0116, 0xff, 0x00, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0116, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010A, 0xff, 0xff, 0x30) },	/* NetPrisma LCUK54-WRD for WWAN Ready */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010A, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010A, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010B, 0xff, 0xff, 0x30) },	/* NetPrisma LCUK54-WWD for WWAN Ready */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010B, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010B, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010C, 0xff, 0xff, 0x30) },	/* NetPrisma LCUK54-WRD for WWAN Ready */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010C, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010C, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010D, 0xff, 0xff, 0x30) },	/* NetPrisma LCUK54-WWD for WWAN Ready */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010D, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010D, 0xff, 0xff, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x30) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x40) },