new file mode 100644
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2024 NXP
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ox05b1s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OX05B1S Image Sensor
+
+maintainers:
+ - Mirela Rabulea <mirela.rabulea@nxp.com>
+
+description:
+ The Omnivision OX05B1S is a 1/2.5-Inch CMOS image sensor with an active
+ array size of 2592 x 1944. It is programmable through I2C interface.
+ Image data is available via MIPI CSI-2 serial data output.
+
+allOf:
+ - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - ovti,ox05b1s
+ - ovti,os08a20
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ description: Input clock (24 MHz)
+ maxItems: 1
+
+ reset-gpios:
+ description: Reference to the GPIO connected to XSHUTDOWN pin. Active low.
+ maxItems: 1
+
+ avdd-supply:
+ description: Power for analog circuit (2.8V)
+
+ dovdd-supply:
+ description: Power for I/O circuit (1.8V)
+
+ dvdd-supply:
+ description: Power for digital circuit (1.2V)
+
+ orientation: true
+
+ rotation: true
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+ description: MIPI CSI-2 transmitter port
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ anyOf:
+ - items:
+ - const: 1
+ - const: 2
+ - items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+ required:
+ - data-lanes
+
+ required:
+ - endpoint
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ox05b1s@36 {
+ compatible = "ovti,ox05b1s";
+ reg = <0x36>;
+ clocks = <&ox05b1s_clk>;
+
+ assigned-clocks = <&ox05b1s_clk>;
+ assigned-clock-parents = <&ox05b1s_clk_parent>;
+ assigned-clock-rates = <24000000>;
+
+ reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+
+ avdd-supply = <&camera_avdd_2v8>;
+ dovdd-supply = <&camera_dovdd_1v8>;
+ dvdd-supply = <&camera_dvdd_1v2>;
+
+ orientation = <2>;
+ rotation = <0>;
+
+ port {
+ ox05b1s_mipi_0_ep: endpoint {
+ remote-endpoint = <&mipi_csi0_ep>;
+ data-lanes = <1 2 3 4>;
+ };
+ };
+ };
+ };
+...
Add bindings for Omnivision OX05B1S sensor. Also add compatible for Omnivision OS08A20 sensor. Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com> --- Changes in v2: Small updates on description Update subject, drop "bindings" and "driver" Just one binding patch (squash os08a20 bindings) Re-flow to 80 columns. Drop clock name (not needed in case of single clock) Make the clock required property, strictly from sensor module point of view, it is mandatory (will use a fixed clock for nxp board) Add regulators: avdd, dvdd, dovdd Add $ref: /schemas/media/video-interface-devices.yaml Drop assigned-clock* properties (defined in clocks.yaml) Keep "additionalProperties : false" and orientation/rotation (unevaluatedProperties: false was suggested, but only orientation/rotation are needed from video-interface-devices.yaml) Include assigned-clock* in the example, for completeness sake (although it was also suggested to omit them) .../bindings/media/i2c/ovti,ox05b1s.yaml | 121 ++++++++++++++++++ 1 file changed, 121 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ox05b1s.yaml