diff mbox series

[v2,for-10.0,01/54] fpu: handle raising Invalid for infzero in pick_nan_muladd

Message ID 20241202131347.498124-2-peter.maydell@linaro.org
State Superseded
Headers show
Series fpu: Remove pickNaNMulAdd, default-NaN ifdefs | expand

Commit Message

Peter Maydell Dec. 2, 2024, 1:12 p.m. UTC 
For IEEE fused multiply-add, the (0 * inf) + NaN case should raise
Invalid for the multiplication of 0 by infinity.  Currently we handle
this in the per-architecture ifdef ladder in pickNaNMulAdd().
However, since this isn't really architecture specific we can hoist
it up to the generic code.

For the cases where the infzero test in pickNaNMulAdd was
returning 2, we can delete the check entirely and allow the
code to fall into the normal pick-a-NaN handling, because this
will return 2 anyway (input 'c' being the only NaN in this case).
For the cases where infzero was returning 3 to indicate "return
the default NaN", we must retain that "return 3".

For Arm, this looks like it might be a behaviour change because we
used to set float_flag_invalid | float_flag_invalid_imz only if C is
a quiet NaN.  However, it is not, because Arm target code never looks
at float_flag_invalid_imz, and for the (0 * inf) + SNaN case we
already raised float_flag_invalid via the "abc_mask &
float_cmask_snan" check in pick_nan_muladd.

For any target architecture using the "default implementation" at the
bottom of the ifdef, this is a behaviour change but will be fixing a
bug (where we failed to raise the Invalid exception for (0 * inf +
QNaN).  The architectures using the default case are:
 * hppa
 * i386
 * sh4
 * tricore

The x86, Tricore and SH4 CPU architecture manuals are clear that this
should have raised Invalid; HPPA is a bit vaguer but still seems
clear enough.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
 fpu/softfloat-parts.c.inc      | 13 +++++++------
 fpu/softfloat-specialize.c.inc | 29 +----------------------------
 2 files changed, 8 insertions(+), 34 deletions(-)
diff mbox series

Patch

diff --git a/fpu/softfloat-parts.c.inc b/fpu/softfloat-parts.c.inc
index cc6e06b9761..d63cd957a19 100644
--- a/fpu/softfloat-parts.c.inc
+++ b/fpu/softfloat-parts.c.inc
@@ -66,19 +66,20 @@  static FloatPartsN *partsN(pick_nan_muladd)(FloatPartsN *a, FloatPartsN *b,
                                             int ab_mask, int abc_mask)
 {
     int which;
+    bool infzero = (ab_mask == float_cmask_infzero);
 
     if (unlikely(abc_mask & float_cmask_snan)) {
         float_raise(float_flag_invalid | float_flag_invalid_snan, s);
     }
 
-    which = pickNaNMulAdd(a->cls, b->cls, c->cls,
-                          ab_mask == float_cmask_infzero, s);
+    if (infzero) {
+        /* This is (0 * inf) + NaN or (inf * 0) + NaN */
+        float_raise(float_flag_invalid | float_flag_invalid_imz, s);
+    }
+
+    which = pickNaNMulAdd(a->cls, b->cls, c->cls, infzero, s);
 
     if (s->default_nan_mode || which == 3) {
-        /*
-         * Note that this check is after pickNaNMulAdd so that function
-         * has an opportunity to set the Invalid flag for infzero.
-         */
         parts_default_nan(a, s);
         return a;
     }
diff --git a/fpu/softfloat-specialize.c.inc b/fpu/softfloat-specialize.c.inc
index 9bca03c4aed..c557c41b2af 100644
--- a/fpu/softfloat-specialize.c.inc
+++ b/fpu/softfloat-specialize.c.inc
@@ -480,7 +480,6 @@  static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls,
      * the default NaN
      */
     if (infzero && is_qnan(c_cls)) {
-        float_raise(float_flag_invalid | float_flag_invalid_imz, status);
         return 3;
     }
 
@@ -507,7 +506,6 @@  static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls,
          * case sets InvalidOp and returns the default NaN
          */
         if (infzero) {
-            float_raise(float_flag_invalid | float_flag_invalid_imz, status);
             return 3;
         }
         /* Prefer sNaN over qNaN, in the a, b, c order. */
@@ -529,10 +527,6 @@  static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls,
          * For MIPS systems that conform to IEEE754-2008, the (inf,zero,nan)
          * case sets InvalidOp and returns the input value 'c'
          */
-        if (infzero) {
-            float_raise(float_flag_invalid | float_flag_invalid_imz, status);
-            return 2;
-        }
         /* Prefer sNaN over qNaN, in the c, a, b order. */
         if (is_snan(c_cls)) {
             return 2;
@@ -553,10 +547,7 @@  static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls,
      * For LoongArch systems that conform to IEEE754-2008, the (inf,zero,nan)
      * case sets InvalidOp and returns the input value 'c'
      */
-    if (infzero) {
-        float_raise(float_flag_invalid | float_flag_invalid_imz, status);
-        return 2;
-    }
+
     /* Prefer sNaN over qNaN, in the c, a, b order. */
     if (is_snan(c_cls)) {
         return 2;
@@ -576,10 +567,6 @@  static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls,
      * to return an input NaN if we have one (ie c) rather than generating
      * a default NaN
      */
-    if (infzero) {
-        float_raise(float_flag_invalid | float_flag_invalid_imz, status);
-        return 2;
-    }
 
     /* If fRA is a NaN return it; otherwise if fRB is a NaN return it;
      * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB
@@ -592,14 +579,9 @@  static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls,
         return 1;
     }
 #elif defined(TARGET_RISCV)
-    /* For RISC-V, InvalidOp is set when multiplicands are Inf and zero */
-    if (infzero) {
-        float_raise(float_flag_invalid | float_flag_invalid_imz, status);
-    }
     return 3; /* default NaN */
 #elif defined(TARGET_S390X)
     if (infzero) {
-        float_raise(float_flag_invalid | float_flag_invalid_imz, status);
         return 3;
     }
 
@@ -617,11 +599,6 @@  static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls,
         return 2;
     }
 #elif defined(TARGET_SPARC)
-    /* For (inf,0,nan) return c. */
-    if (infzero) {
-        float_raise(float_flag_invalid | float_flag_invalid_imz, status);
-        return 2;
-    }
     /* Prefer SNaN over QNaN, order C, B, A. */
     if (is_snan(c_cls)) {
         return 2;
@@ -641,10 +618,6 @@  static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls,
      * For Xtensa, the (inf,zero,nan) case sets InvalidOp and returns
      * an input NaN if we have one (ie c).
      */
-    if (infzero) {
-        float_raise(float_flag_invalid | float_flag_invalid_imz, status);
-        return 2;
-    }
     if (status->use_first_nan) {
         if (is_nan(a_cls)) {
             return 0;