diff mbox series

[4/4] arm64: dts: exynos: gs101-oriole: enable Maxim max77759 fuel gauge

Message ID 20241202-b4-gs101_max77759_fg-v1-4-98d2fa7bfe30@uclouvain.be
State New
Headers show
Series Google Pixel 6 (oriole): max77759 fuel gauge enablement and driver support | expand

Commit Message

Thomas Antoine via B4 Relay Dec. 2, 2024, 1:07 p.m. UTC 
From: Thomas Antoine <t.antoine@uclouvain.be>

Add the node for the max77759 fuel gauge as a slave of the i2c.

The fuel gauge has been tested and seems to give coherent results.
Manual activation of the charger via i2cset shows that the sign of
the current does indicate charging/discharging status.

Signed-off-by: Thomas Antoine <t.antoine@uclouvain.be>
---
 arch/arm64/boot/dts/exynos/google/gs101-oriole.dts | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Thomas Antoine Dec. 2, 2024, 3:03 p.m. UTC | #1 
On 12/2/24 14:41, Krzysztof Kozlowski wrote:
> On 02/12/2024 14:07, Thomas Antoine via B4 Relay wrote:
>> From: Thomas Antoine <t.antoine@uclouvain.be>
>>  &hsi2c_12 {
>>       status = "okay";
>>       /* TODO: add the devices once drivers exist */
> 
> 
> Is this still applicable?

Yes, there are other devices on the bus (the Maxim max77759 pmic, charger
and TPCI, the Maxim max20339 OVP and the NXP PCA9468).

>> +
>> +     fuel-gauge@36 {
>> +             compatible = "maxim,max77759-fg";
>> +             reg = <0x36>;
>> +             reg-names = "m5";
> 
> 
> No interrupts?

There are interrupts in the stock devicetree but they didn't compile out
of the box when adding them to the node without any other modification and
I didn't try further given the device worked without them. I can try to
get them to work for v2.

>> +     };
>> +
> 
> 
> Do not add stray blank lines.

Will remove in v2.

Best regards,
Thomas Antoine
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
index 387fb779bd29ea3812331a7951f03b181c5fe659..4c45dd6fd0173889234b7b04d7abb4b382c7706c 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
+++ b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
@@ -90,6 +90,13 @@  eeprom: eeprom@50 {
 &hsi2c_12 {
 	status = "okay";
 	/* TODO: add the devices once drivers exist */
+
+	fuel-gauge@36 {
+		compatible = "maxim,max77759-fg";
+		reg = <0x36>;
+		reg-names = "m5";
+	};
+
 };
 
 &pinctrl_far_alive {