diff mbox series

[v2,02/16] cpufreq/amd-pstate: Use boost numerator for upper bound of frequencies

Message ID 20241208063031.3113-3-mario.limonciello@amd.com
State Superseded
Headers show
Series amd-pstate fixes and improvements for 6.14 | expand

Commit Message

Mario Limonciello Dec. 8, 2024, 6:30 a.m. UTC
commit 18d9b5227121 ("cpufreq/amd-pstate: Use nominal perf for limits
when boost is disabled") introduced different semantics for min/max limits
based upon whether the user turned off boost from sysfs.

This however is not necessary when the highest perf value is the boost
numerator.

Suggested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Fixes: 18d9b5227121 ("cpufreq/amd-pstate: Use nominal perf for limits when boost is disabled")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
 drivers/cpufreq/amd-pstate.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
index c51026fe636a9..5e0edb65de32a 100644
--- a/drivers/cpufreq/amd-pstate.c
+++ b/drivers/cpufreq/amd-pstate.c
@@ -593,16 +593,13 @@  static int amd_pstate_verify(struct cpufreq_policy_data *policy_data)
 
 static int amd_pstate_update_min_max_limit(struct cpufreq_policy *policy)
 {
-	u32 max_limit_perf, min_limit_perf, lowest_perf, max_perf;
+	u32 max_limit_perf, min_limit_perf, lowest_perf, max_perf, max_freq;
 	struct amd_cpudata *cpudata = policy->driver_data;
 
-	if (cpudata->boost_supported && !policy->boost_enabled)
-		max_perf = READ_ONCE(cpudata->nominal_perf);
-	else
-		max_perf = READ_ONCE(cpudata->highest_perf);
-
-	max_limit_perf = div_u64(policy->max * max_perf, policy->cpuinfo.max_freq);
-	min_limit_perf = div_u64(policy->min * max_perf, policy->cpuinfo.max_freq);
+	max_perf = READ_ONCE(cpudata->highest_perf);
+	max_freq = READ_ONCE(cpudata->max_freq);
+	max_limit_perf = div_u64(policy->max * max_perf, max_freq);
+	min_limit_perf = div_u64(policy->min * max_perf, max_freq);
 
 	lowest_perf = READ_ONCE(cpudata->lowest_perf);
 	if (min_limit_perf < lowest_perf)