diff mbox series

[v5,02/12] dmaengine: add DMA_PREP_LOCK and DMA_PREP_UNLOCK flag

Message ID 20241212041639.4109039-3-quic_mdalam@quicinc.com
State New
Headers show
Series dmaengine: qcom: bam_dma: add cmd descriptor support | expand

Commit Message

Md Sadre Alam Dec. 12, 2024, 4:16 a.m. UTC 
Add lock and unlock flag support on command descriptor.
Once lock set in requester pipe, then the bam controller
will lock all others pipe and process the request only
from requester pipe. Unlocking only can be performed from
the same pipe.

If DMA_PREP_LOCK flag passed in command descriptor then requester
of this transaction wanted to lock the BAM controller for this
transaction so BAM driver should set LOCK bit for the HW descriptor.

If DMA_PREP_UNLOCK flag passed in command descriptor then requester
of this transaction wanted to unlock the BAM controller.so BAM driver
should set UNLOCK bit for the HW descriptor.

BAM IP version 1.4.0 and above only supports this LOCK/UNLOCK
feature.

Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
---

Change in [v5]

* Added DMA_PREP_LOCK and DMA_PREP_UNLOCK flag support

Change in [v4]

* This patch was not included in v4

Change in [v3]

* This patch was not included in v3

Change in [v2]

* This patch was not included in v2
 
Change in [v1]

* This patch was not included in v1

 Documentation/driver-api/dmaengine/provider.rst | 15 +++++++++++++++
 include/linux/dmaengine.h                       |  6 ++++++
 2 files changed, 21 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/driver-api/dmaengine/provider.rst b/Documentation/driver-api/dmaengine/provider.rst
index 3085f8b460fa..5f30c20f94f3 100644
--- a/Documentation/driver-api/dmaengine/provider.rst
+++ b/Documentation/driver-api/dmaengine/provider.rst
@@ -628,6 +628,21 @@  DMA_CTRL_REUSE
   - This flag is only supported if the channel reports the DMA_LOAD_EOT
     capability.
 
+- DMA_PREP_LOCK
+
+  - If set, the BAM will lock all other pipes not related to the current
+    pipe group, and keep handling the current pipe only.
+
+  - All pipes not within this group will be locked by this pipe upon lock
+    event.
+
+  - only pipes which are in the same group and relate to the same Environment
+    Execution(EE) will not be locked by a certain pipe.
+
+- DMA_PREP_UNLOCK
+
+  - If set, BAM will release all locked pipes
+
 General Design Notes
 ====================
 
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 346251bf1026..8ebd43a998a7 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -200,6 +200,10 @@  struct dma_vec {
  *  transaction is marked with DMA_PREP_REPEAT will cause the new transaction
  *  to never be processed and stay in the issued queue forever. The flag is
  *  ignored if the previous transaction is not a repeated transaction.
+ *  @DMA_PREP_LOCK: tell the driver that there is a lock bit set on command
+ *  descriptor.
+ *  @DMA_PREP_UNLOCK: tell the driver that there is a un-lock bit set on command
+ *  descriptor.
  */
 enum dma_ctrl_flags {
 	DMA_PREP_INTERRUPT = (1 << 0),
@@ -212,6 +216,8 @@  enum dma_ctrl_flags {
 	DMA_PREP_CMD = (1 << 7),
 	DMA_PREP_REPEAT = (1 << 8),
 	DMA_PREP_LOAD_EOT = (1 << 9),
+	DMA_PREP_LOCK = (1 << 10),
+	DMA_PREP_UNLOCK = (1 << 11),
 };
 
 /**