@@ -1876,6 +1876,142 @@ tcsr: syscon@1fc0000 {
reg = <0x0 0x1fc0000 0x0 0x30000>;
};
+ adsp: remoteproc@3000000 {
+ compatible = "qcom,sm8350-adsp-pas";
+ reg = <0x0 0x03000000 0x0 0x10000>;
+
+ interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_LCX>,
+ <&rpmhpd RPMHPD_LMX>;
+ power-domain-names = "lcx", "lmx";
+
+ memory-region = <&pil_adsp_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "lpass";
+ qcom,remote-pid = <2>;
+
+ apr {
+ compatible = "qcom,apr-v2";
+ qcom,glink-channels = "apr_audio_svc";
+ qcom,domain = <APR_DOMAIN_ADSP>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ service@3 {
+ reg = <APR_SVC_ADSP_CORE>;
+ compatible = "qcom,q6core";
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+ };
+
+ q6afe: service@4 {
+ compatible = "qcom,q6afe";
+ reg = <APR_SVC_AFE>;
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+ q6afedai: dais {
+ compatible = "qcom,q6afe-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ };
+
+ q6afecc: clock-controller {
+ compatible = "qcom,q6afe-clocks";
+ #clock-cells = <2>;
+ };
+ };
+
+ q6asm: service@7 {
+ compatible = "qcom,q6asm";
+ reg = <APR_SVC_ASM>;
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+ q6asmdai: dais {
+ compatible = "qcom,q6asm-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ iommus = <&apps_smmu 0x1801 0x0>;
+
+ dai@0 {
+ reg = <0>;
+ };
+
+ dai@1 {
+ reg = <1>;
+ };
+
+ dai@2 {
+ reg = <2>;
+ };
+ };
+ };
+
+ q6adm: service@8 {
+ compatible = "qcom,q6adm";
+ reg = <APR_SVC_ADM>;
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+ q6routing: routing {
+ compatible = "qcom,q6adm-routing";
+ #sound-dai-cells = <0>;
+ };
+ };
+ };
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "adsp";
+ qcom,non-secure-domain;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+ iommus = <&apps_smmu 0x1803 0x0>;
+ };
+
+ compute-cb@4 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <4>;
+ iommus = <&apps_smmu 0x1804 0x0>;
+ };
+
+ compute-cb@5 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <5>;
+ iommus = <&apps_smmu 0x1805 0x0>;
+ };
+ };
+ };
+ };
+
lpass_tlmm: pinctrl@33c0000 {
compatible = "qcom,sm8350-lpass-lpi-pinctrl";
reg = <0 0x033c0000 0 0x20000>,
@@ -3285,142 +3421,6 @@ apps_smmu: iommu@15000000 {
dma-coherent;
};
- adsp: remoteproc@17300000 {
- compatible = "qcom,sm8350-adsp-pas";
- reg = <0 0x17300000 0 0x100>;
-
- interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
-
- clocks = <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "xo";
-
- power-domains = <&rpmhpd RPMHPD_LCX>,
- <&rpmhpd RPMHPD_LMX>;
- power-domain-names = "lcx", "lmx";
-
- memory-region = <&pil_adsp_mem>;
-
- qcom,qmp = <&aoss_qmp>;
-
- qcom,smem-states = <&smp2p_adsp_out 0>;
- qcom,smem-state-names = "stop";
-
- status = "disabled";
-
- glink-edge {
- interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
- IPCC_MPROC_SIGNAL_GLINK_QMP
- IRQ_TYPE_EDGE_RISING>;
- mboxes = <&ipcc IPCC_CLIENT_LPASS
- IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
- label = "lpass";
- qcom,remote-pid = <2>;
-
- apr {
- compatible = "qcom,apr-v2";
- qcom,glink-channels = "apr_audio_svc";
- qcom,domain = <APR_DOMAIN_ADSP>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- service@3 {
- reg = <APR_SVC_ADSP_CORE>;
- compatible = "qcom,q6core";
- qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
- };
-
- q6afe: service@4 {
- compatible = "qcom,q6afe";
- reg = <APR_SVC_AFE>;
- qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-
- q6afedai: dais {
- compatible = "qcom,q6afe-dais";
- #address-cells = <1>;
- #size-cells = <0>;
- #sound-dai-cells = <1>;
- };
-
- q6afecc: clock-controller {
- compatible = "qcom,q6afe-clocks";
- #clock-cells = <2>;
- };
- };
-
- q6asm: service@7 {
- compatible = "qcom,q6asm";
- reg = <APR_SVC_ASM>;
- qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-
- q6asmdai: dais {
- compatible = "qcom,q6asm-dais";
- #address-cells = <1>;
- #size-cells = <0>;
- #sound-dai-cells = <1>;
- iommus = <&apps_smmu 0x1801 0x0>;
-
- dai@0 {
- reg = <0>;
- };
-
- dai@1 {
- reg = <1>;
- };
-
- dai@2 {
- reg = <2>;
- };
- };
- };
-
- q6adm: service@8 {
- compatible = "qcom,q6adm";
- reg = <APR_SVC_ADM>;
- qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-
- q6routing: routing {
- compatible = "qcom,q6adm-routing";
- #sound-dai-cells = <0>;
- };
- };
- };
-
- fastrpc {
- compatible = "qcom,fastrpc";
- qcom,glink-channels = "fastrpcglink-apps-dsp";
- label = "adsp";
- qcom,non-secure-domain;
- #address-cells = <1>;
- #size-cells = <0>;
-
- compute-cb@3 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <3>;
- iommus = <&apps_smmu 0x1803 0x0>;
- };
-
- compute-cb@4 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <4>;
- iommus = <&apps_smmu 0x1804 0x0>;
- };
-
- compute-cb@5 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <5>;
- iommus = <&apps_smmu 0x1805 0x0>;
- };
- };
- };
- };
-
intc: interrupt-controller@17a00000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
The address space in ADSP PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB): 0x0300_0000 with length of 0x10000. 0x1730_0000, value used so far, was copied from downstream DTS, is in the middle of unused space and downstream DTS describes the PIL loader, which is a bit different interface. Assume existing value (thus downstream DTS) is not really describing the intended ADSP PAS region. Correct the base address and length, which also moves the node to different place to keep things sorted by unit address. The diff looks big, but only the unit address and "reg" property were changed. This should have no functional impact on Linux users, because PAS loader does not use this address space at all. Fixes: 177fcf0aeda2 ("arm64: dts: qcom: sm8350: Add remoteprocs") Cc: stable@vger.kernel.org Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 272 +++++++++++++++++------------------ 1 file changed, 136 insertions(+), 136 deletions(-)