@@ -1693,6 +1693,9 @@ static int gpi_create_i2c_tre(struct gchan *chan, struct gpi_desc *desc,
tre->dword[3] = u32_encode_bits(TRE_TYPE_DMA, TRE_FLAGS_TYPE);
tre->dword[3] |= u32_encode_bits(1, TRE_FLAGS_IEOT);
+
+ if (i2c->flags & QCOM_GPI_BLOCK_EVENT_IRQ)
+ tre->dword[3] |= u32_encode_bits(1, TRE_FLAGS_BEI);
}
for (i = 0; i < tre_idx; i++)
@@ -15,6 +15,13 @@ enum spi_transfer_cmd {
SPI_DUPLEX,
};
+/**
+ * define QCOM_GPI_BLOCK_EVENT_IRQ - Block event interrupt support
+ *
+ * This is used to enable/disable the Block event interrupt mechanism.
+ */
+#define QCOM_GPI_BLOCK_EVENT_IRQ BIT(0)
+
/**
* struct gpi_spi_config - spi config for peripheral
*
@@ -65,6 +72,7 @@ enum i2c_op {
* @rx_len: receive length for buffer
* @op: i2c cmd
* @muli-msg: is part of multi i2c r-w msgs
+ * @flags: true for block event interrupt support
*/
struct gpi_i2c_config {
u8 set_config;
@@ -78,6 +86,7 @@ struct gpi_i2c_config {
u32 rx_len;
enum i2c_op op;
bool multi_msg;
+ bool flags;
};
#endif /* QCOM_GPI_DMA_H */
GSI hardware generates an interrupt for each transfer completion. For multiple messages within a single transfer, this results in N interrupts for N messages, leading to significant software interrupt latency. To mitigate this latency, utilize Block Event Interrupt (BEI) mechanism. Enabling BEI instructs the GSI hardware to prevent interrupt generation and BEI is disabled when an interrupt is necessary. When using BEI, consider splitting a single multi-message transfer into chunks of 8 internally. Interrupts are not expected for the first 7 message completions, only the last message triggers an interrupt,indicating the completion of 8 messages. This BEI mechanism enhances overall transfer efficiency. Signed-off-by: Jyothi Kumar Seerapu <quic_jseerapu@quicinc.com> --- v3 -> v4: - API's added for Block event interrupt with multi descriptor support for I2C is moved from qcom-gpi-dma.h file to I2C geni qcom driver file. - gpi_multi_xfer_timeout_handler function is moved from GPI driver to I2C driver. v2-> v3: - Renamed gpi_multi_desc_process to gpi_multi_xfer_timeout_handler - MIN_NUM_OF_MSGS_MULTI_DESC changed from 4 to 2 - Added documentation for newly added changes in "qcom-gpi-dma.h" file - Updated commit description. v1 -> v2: - Changed dma_addr type from array of pointers to array. - To support BEI functionality with the TRE size of 64 defined in GPI driver, updated QCOM_GPI_MAX_NUM_MSGS to 16 and NUM_MSGS_PER_IRQ to 4. drivers/dma/qcom/gpi.c | 3 +++ include/linux/dma/qcom-gpi-dma.h | 9 +++++++++ 2 files changed, 12 insertions(+)