@@ -2,5 +2,18 @@
* Standard pin control state definitions
*/
+/**
+ * @PINCTRL_STATE_DEFAULT: the state the pinctrl handle shall be put
+ * into as default, usually this means the pins are up and ready to
+ * be used by the device driver. This state is commonly used by
+ * hogs to configure muxing and pins at boot.
+ * @PINCTRL_STATE_IDLE: the state the pinctrl handle shall be put into
+ * when the pins are idle. Could typically be set from a
+ * pm_runtime_suspend() operation.
+ * @PINCTRL_STATE_SLEEP: the state the pinctrl handle shall be put into
+ * when the pins are sleeping. Could typically be set from a
+ * common suspend() function.
+ */
#define PINCTRL_STATE_DEFAULT "default"
#define PINCTRL_STATE_IDLE "idle"
+#define PINCTRL_STATE_SLEEP "sleep"