diff mbox series

arm64: dts: qcom: x1e80100: Fix usb_2 controller interrupts

Message ID 20250107-x1e80100-fix-usb2-controller-irqs-v1-1-4689aa9852a7@linaro.org
State New
Headers show
Series arm64: dts: qcom: x1e80100: Fix usb_2 controller interrupts | expand

Commit Message

Abel Vesa Jan. 7, 2025, 1:15 p.m. UTC 
Back when the CRD support was brought up, the usb_2 controller didn't
have anything connected to it in order to test it properly, so it was
never enabled.

On the Lenovo ThinkPad T14s, the usb_2 controller has the fingerprint
controller connected to it. So enabling it, proved that the interrupts
lines were wrong from the start.

Fix both the pwr_event and the DWC ctrl_irq lines, according to
documentation.

Fixes: 4af46b7bd66f ("arm64: dts: qcom: x1e80100: Add USB nodes")
Cc: stable@vger.kernel.org	# 6.9
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 arch/arm64/boot/dts/qcom/x1e80100.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)


---
base-commit: 7b4b9bf203da94fbeac75ed3116c84aa03e74578
change-id: 20250107-x1e80100-fix-usb2-controller-irqs-b226a747f73a

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index e2f1873296ec7b7ffdb4c57b5c9d5b09368de168..1c3ad5ae0a41ea235cb176095cd49de7fa89ae4a 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -4631,7 +4631,7 @@  usb_2: usb@a2f8800 {
 					  <&gcc GCC_USB20_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 50 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 49 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "pwr_event",
@@ -4657,7 +4657,7 @@  &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 			usb_2_dwc3: usb@a200000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a200000 0 0xcd00>;
-				interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
 				iommus = <&apps_smmu 0x14e0 0x0>;
 				phys = <&usb_2_hsphy>;
 				phy-names = "usb2-phy";