diff mbox series

[4/5] serial: sh-sci: Clean sci_ports[0] after at earlycon exit

Message ID 20250116182249.3828577-5-claudiu.beznea.uj@bp.renesas.com
State New
Headers show
Series serial: sh-sci: Fixes for earlycon and keep_bootcon | expand

Commit Message

Claudiu Jan. 16, 2025, 6:22 p.m. UTC 
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

The early_console_setup() function initializes sci_ports[0].port with an
object of type struct uart_port obtained from the struct earlycon_device
passed as an argument to early_console_setup().

Later, during serial port probing, the serial port used as earlycon
(e.g., port A) might be remapped to a different position in the sci_ports[]
array, and a different serial port (e.g., port B) might be assigned to slot
0. For example:

sci_ports[0] = port B
sci_ports[X] = port A

In this scenario, the new port mapped at index zero (port B) retains the
data associated with the earlycon configuration. Consequently, after the
Linux boot process, any access to the serial port now mapped to
sci_ports[0] (port B) will block the original earlycon port (port A).

To address this, introduce an early_console_exit() function to clean up
sci_ports[0] when earlycon is exited.

To prevent the cleanup of sci_ports[0] while the serial device is still
being used by earlycon, introduce the struct sci_port::probing flag and
account for it in early_console_exit().

Fixes: 0b0cced19ab1 ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support")
Cc: stable@vger.kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---

Changes since RFT:
- converted "probing" member of struct sci_port to a local variable
  (named sci_uart_earlycon_dev_probing
- used sci_uart_earlycon instead of sci_port::earlycon from RFT
  version
- dropped the double "up" in the added comment
- changed the cleanup condition in early_console_exit() to
  if (!sci_uart_earlycon_dev_probing)
- set sci_uart_earlycon = false in early_console_exit()


 drivers/tty/serial/sh-sci.c | 32 ++++++++++++++++++++++++++++++--
 1 file changed, 30 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index b85a9d425f7e..e64d59888ecd 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -166,6 +166,7 @@  static struct sci_port sci_ports[SCI_NPORTS];
 static unsigned long sci_ports_in_use;
 static struct uart_driver sci_uart_driver;
 static bool sci_uart_earlycon;
+static bool sci_uart_earlycon_dev_probing;
 
 static inline struct sci_port *
 to_sci_port(struct uart_port *uart)
@@ -3386,7 +3387,8 @@  static struct plat_sci_port *sci_parse_dt(struct platform_device *pdev,
 static int sci_probe_single(struct platform_device *dev,
 				      unsigned int index,
 				      struct plat_sci_port *p,
-				      struct sci_port *sciport)
+				      struct sci_port *sciport,
+				      struct resource *sci_res)
 {
 	int ret;
 
@@ -3433,6 +3435,14 @@  static int sci_probe_single(struct platform_device *dev,
 		sciport->port.flags |= UPF_HARD_FLOW;
 	}
 
+	if (sci_uart_earlycon && sci_ports[0].port.mapbase == sci_res->start) {
+		/*
+		 * Skip cleanup the sci_port[0] in early_console_exit(), this
+		 * port is the same as the earlycon one.
+		 */
+		sci_uart_earlycon_dev_probing = true;
+	}
+
 	return uart_add_one_port(&sci_uart_driver, &sciport->port);
 }
 
@@ -3491,7 +3501,7 @@  static int sci_probe(struct platform_device *dev)
 
 	platform_set_drvdata(dev, sp);
 
-	ret = sci_probe_single(dev, dev_id, p, sp);
+	ret = sci_probe_single(dev, dev_id, p, sp, res);
 	if (ret)
 		return ret;
 
@@ -3574,6 +3584,22 @@  sh_early_platform_init_buffer("earlyprintk", &sci_driver,
 #ifdef CONFIG_SERIAL_SH_SCI_EARLYCON
 static struct plat_sci_port port_cfg;
 
+static int early_console_exit(struct console *co)
+{
+	struct sci_port *sci_port = &sci_ports[0];
+
+	/*
+	 * Clean the slot used by earlycon. A new SCI device might
+	 * map to this slot.
+	 */
+	if (!sci_uart_earlycon_dev_probing) {
+		memset(sci_port, 0, sizeof(*sci_port));
+		sci_uart_earlycon = false;
+	}
+
+	return 0;
+}
+
 static int __init early_console_setup(struct earlycon_device *device,
 				      int type)
 {
@@ -3591,6 +3617,8 @@  static int __init early_console_setup(struct earlycon_device *device,
 		       SCSCR_RE | SCSCR_TE | port_cfg.scscr);
 
 	device->con->write = serial_console_write;
+	device->con->exit = early_console_exit;
+
 	return 0;
 }
 static int __init sci_early_console_setup(struct earlycon_device *device,