diff mbox series

[v2,5/5] i2c: tegra: Add Tegra264 support

Message ID 20250130143424.52389-6-kkartik@nvidia.com
State New
Headers show
Series Add I2C support for Tegra264 | expand

Commit Message

Kartik Rajput Jan. 30, 2025, 2:34 p.m. UTC 
From: Akhil R <akhilrajeev@nvidia.com>

Add support for Tegra264 SoC which supports 17 generic I2C controllers,
two of which are in the AON (always-on) partition of the SoC. Tegra264
I2C supports all the features supported by Tegra194 I2C controllers.

Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
---
 drivers/i2c/busses/i2c-tegra.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index aa92faa6f5cb..415337e069f5 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -1751,7 +1751,36 @@  static const struct tegra_i2c_hw_feature tegra194_i2c_hw = {
 	.has_mutex = false,
 };
 
+static const struct tegra_i2c_hw_feature tegra264_i2c_hw = {
+	.has_continue_xfer_support = true,
+	.has_per_pkt_xfer_complete_irq = true,
+	.clk_divisor_hs_mode = 1,
+	.clk_divisor_std_mode = 0x1d,
+	.clk_divisor_fast_mode = 0x15,
+	.clk_divisor_fast_plus_mode = 0x8,
+	.has_config_load_reg = true,
+	.has_multi_master_mode = true,
+	.has_slcg_override_reg = true,
+	.has_mst_fifo = true,
+	.quirks = &tegra194_i2c_quirks,
+	.supports_bus_clear = true,
+	.has_apb_dma = false,
+	.tlow_std_mode = 0x8,
+	.thigh_std_mode = 0x7,
+	.tlow_fast_fastplus_mode = 0x2,
+	.thigh_fast_fastplus_mode = 0x2,
+	.tlow_hs_mode = 0x4,
+	.thigh_hs_mode = 0x2,
+	.setup_hold_time_std_mode = 0x08080808,
+	.setup_hold_time_fast_fast_plus_mode = 0x02020202,
+	.setup_hold_time_hs_mode = 0x090909,
+	.has_interface_timing_reg = true,
+	.has_hs_mode_support = true,
+	.has_mutex = true,
+};
+
 static const struct of_device_id tegra_i2c_of_match[] = {
+	{ .compatible = "nvidia,tegra264-i2c", .data = &tegra264_i2c_hw, },
 	{ .compatible = "nvidia,tegra194-i2c", .data = &tegra194_i2c_hw, },
 	{ .compatible = "nvidia,tegra186-i2c", .data = &tegra186_i2c_hw, },
 #if IS_ENABLED(CONFIG_ARCH_TEGRA_210_SOC)