diff mbox series

[2/2] wifi: ath12k: Pass correct values of center freq1 and center freq2 for 320 MHz

Message ID 20250204053451.2703834-3-quic_surapk@quicinc.com
State New
Headers show
Series wifi: ath12k: Pass correct channel frequency parameters | expand

Commit Message

Suraj P Kizhakkethil Feb. 4, 2025, 5:34 a.m. UTC 
From: Sriram R <quic_srirrama@quicinc.com>

Currently, for 320 MHz bandwidth, center frequency1 and
center frequency2 are not passed correctly to the firmware.
Set center frequency1 as the center frequency of the
primary 160 MHz channel segment and center frequency2 as the center
frequency of the 320 MHz channel and pass the values
to the firmware.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1

Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Suraj P Kizhakkethil <quic_surapk@quicinc.com>
---
 drivers/net/wireless/ath/ath12k/wmi.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath12k/wmi.c b/drivers/net/wireless/ath/ath12k/wmi.c
index 848a65268194..982bdfc4902f 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.c
+++ b/drivers/net/wireless/ath/ath12k/wmi.c
@@ -1043,7 +1043,15 @@  static void ath12k_wmi_put_wmi_channel(struct ath12k_wmi_channel_params *chan,
 
 	chan->mhz = cpu_to_le32(arg->freq);
 	chan->band_center_freq1 = cpu_to_le32(arg->band_center_freq1);
-	if (arg->mode == MODE_11BE_EHT160) {
+	if (arg->mode == MODE_11BE_EHT320) {
+		if (arg->freq > arg->band_center_freq1)
+			chan->band_center_freq1 = cpu_to_le32(center_freq1 + 80);
+		else
+			chan->band_center_freq1 = cpu_to_le32(center_freq1 - 80);
+
+		chan->band_center_freq2 = cpu_to_le32(arg->band_center_freq1);
+
+	} else if (arg->mode == MODE_11BE_EHT160) {
 		if (arg->freq > arg->band_center_freq1)
 			chan->band_center_freq1 = cpu_to_le32(center_freq1 + 40);
 		else