diff mbox series

[3/5] dt-bindings: i2c: maxim,max96717: add new properties

Message ID 20250207112958.2571600-4-laurentiu.palcu@oss.nxp.com
State New
Headers show
Series media/i2c: max96717: a few changes | expand

Commit Message

Laurentiu Palcu Feb. 7, 2025, 11:29 a.m. UTC
Add 'maxim,override-mode' property to allow the user to toggle the pin
configured chip operation mode and 'maxim,fsync-config' to configure the
chip for relaying a frame synchronization signal, received from
deserializer, to the attached sensor. The latter is needed for
synchronizing the images in multi-sensor setups.

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
---
 .../bindings/media/i2c/maxim,max96717.yaml    | 28 +++++++++++++++++++
 1 file changed, 28 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
index d1e8ba6e368ec..fae578d55fd4d 100644
--- a/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
@@ -42,10 +42,35 @@  properties:
       number must be in range of [0, 10].
 
   gpio-controller: true
+  gpio-reserved-ranges: true
 
   '#clock-cells':
     const: 0
 
+  maxim,override-mode:
+    description: Toggle the operation mode from the pin configured one.
+    type: boolean
+
+  maxim,fsync-config:
+    description:
+      Frame synchronization (FSYNC) is used to align images sent from multiple
+      sources in surround-view applications and is required for concatenation.
+      In FSYNC mode, the deserializer sends a sync signal to each serializer;
+      the serializers then send the signal to the connected sensor.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: FSYNC RX ID, needs to match the TX ID configured in the deserializer.
+        minimum: 0
+        maximum: 31
+        default: 0
+      - description:
+          Output GPIO pin used for sending the FSYNC to the sensor. The pin, however, needs
+          to be excluded from the gpiochip using the gpio-reserved-ranges property since
+          it will be used exclusively for FSYNC generation.
+        minimum: 0
+        maximum: 10
+        default: 0
+
   reg:
     maxItems: 1
 
@@ -113,6 +138,9 @@  examples:
             #gpio-cells = <2>;
             #clock-cells = <0>;
 
+            gpio-reserved-ranges = <0 1>;
+            maxim,fsync-config = <0 0>;
+
             ports {
                 #address-cells = <1>;
                 #size-cells = <0>;