diff mbox series

[V2,1/3] scsi: ufs-qcom: Add support for dumping HW and SW hibern8 count

Message ID 20250305120355.16834-2-quic_mapa@quicinc.com
State New
Headers show
Series scsi: ufs-qcom: Enable Dumping of Hibern8, MCQ, and Testbus Registers | expand

Commit Message

Manish Pandey March 5, 2025, 12:03 p.m. UTC 
This patch adds functionality to dump both hardware and software
hibern8 enter counts. This enhancement will aid in monitoring and
debugging hibern8 state transitions by providing detailed count
information.

Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
---
 drivers/ufs/host/ufs-qcom.c | 9 +++++++++
 drivers/ufs/host/ufs-qcom.h | 9 +++++++++
 2 files changed, 18 insertions(+)
diff mbox series

Patch

diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 1b37449fbffc..f5181773c0e5 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -1573,6 +1573,15 @@  static void ufs_qcom_dump_dbg_regs(struct ufs_hba *hba)
 
 	host = ufshcd_get_variant(hba);
 
+	dev_err(hba->dev, "HW_H8_ENTER_CNT=%d\n", ufshcd_readl(hba, REG_UFS_HW_H8_ENTER_CNT));
+	dev_err(hba->dev, "HW_H8_EXIT_CNT=%d\n", ufshcd_readl(hba, REG_UFS_HW_H8_EXIT_CNT));
+
+	dev_err(hba->dev, "SW_H8_ENTER_CNT=%d\n", ufshcd_readl(hba, REG_UFS_SW_H8_ENTER_CNT));
+	dev_err(hba->dev, "SW_H8_EXIT_CNT=%d\n", ufshcd_readl(hba, REG_UFS_SW_H8_EXIT_CNT));
+
+	dev_err(hba->dev, "SW_AFTER_HW_H8_ENTER_CNT=%d\n",
+			ufshcd_readl(hba, REG_UFS_SW_AFTER_HW_H8_ENTER_CNT));
+
 	ufshcd_dump_regs(hba, REG_UFS_SYS1CLK_1US, 16 * 4,
 			 "HCI Vendor Specific Registers ");
 
diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h
index d0e6ec9128e7..a41db017009f 100644
--- a/drivers/ufs/host/ufs-qcom.h
+++ b/drivers/ufs/host/ufs-qcom.h
@@ -75,6 +75,15 @@  enum {
 	UFS_UFS_DBG_RD_EDTL_RAM			= 0x1900,
 };
 
+/* Vendor-specific Hibern8 count registers for the QCOM UFS host controller. */
+enum {
+	REG_UFS_HW_H8_ENTER_CNT			= 0x2700,
+	REG_UFS_SW_H8_ENTER_CNT			= 0x2704,
+	REG_UFS_SW_AFTER_HW_H8_ENTER_CNT	= 0x2708,
+	REG_UFS_HW_H8_EXIT_CNT			= 0x270C,
+	REG_UFS_SW_H8_EXIT_CNT			= 0x2710,
+};
+
 enum {
 	UFS_MEM_CQIS_VS		= 0x8,
 };