| Message ID | u2isvs32qv53rrkmhwqfex25zeegyb4slbelxk42hpfkun2ruv@274wvt44675k |
|---|---|
| State | New |
| Headers | show |
| Series | [GIT,PULL] i2c-host for v6.15 | expand |
On Sat, Mar 22, 2025 at 04:45:15PM +0100, Andi Shyti wrote: > Hi Wolfram, > > Here we go with the pull request for the merge window. > > It's not a huge batch in terms of patch count, but a few pieces > of long standing work finally reached the finish line. > > Some patches are refreshed from the past, something I plan to do > more often going forward. > > One new driver was added: Spacemit K1. > > Andy has also been very active, contributing the new > i2c_10bit_addr_*_from_msg() helper, which is now being adopted > across several drivers. > > I don't think I've missed anything from the recent submissions, > and I'm happy to have caught up with the pending work. So I > don't expect the need for a part 2 pull request next week. > > Thanks, and I wish you a great weekend! > Andi > > The following changes since commit 4701f33a10702d5fc577c32434eb62adde0a1ae1: > > Linux 6.14-rc7 (2025-03-16 12:55:17 -1000) > > are available in the Git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux.git tags/i2c-host-6.15 > > for you to fetch changes up to 39f8d63804505222dccf265797c2d03de7f2d5b3: > > i2c: iproc: Refactor prototype and remove redundant error checks (2025-03-22 13:11:53 +0100) Thank you, Andi, pulled!
Hi Wolfram, Here we go with the pull request for the merge window. It's not a huge batch in terms of patch count, but a few pieces of long standing work finally reached the finish line. Some patches are refreshed from the past, something I plan to do more often going forward. One new driver was added: Spacemit K1. Andy has also been very active, contributing the new i2c_10bit_addr_*_from_msg() helper, which is now being adopted across several drivers. I don't think I've missed anything from the recent submissions, and I'm happy to have caught up with the pending work. So I don't expect the need for a part 2 pull request next week. Thanks, and I wish you a great weekend! Andi The following changes since commit 4701f33a10702d5fc577c32434eb62adde0a1ae1: Linux 6.14-rc7 (2025-03-16 12:55:17 -1000) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux.git tags/i2c-host-6.15 for you to fetch changes up to 39f8d63804505222dccf265797c2d03de7f2d5b3: i2c: iproc: Refactor prototype and remove redundant error checks (2025-03-22 13:11:53 +0100) ---------------------------------------------------------------- i2c-host updates for v6.15 Refactoring and cleanups - octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general refactorings - octeon: remove 10-bit address support Improvements - amd-asf: improved error handling - designware: use guard(mutex) - amd-asf, designware: update naming to follow latest specs - cadence: fix cleanup path in probe - i801: use MMIO and I/O mapping helpers to access registers - pxa: handle error after clk_prepare_enable New features - added i2c_10bit_addr_*_from_msg() and updated multiple drivers - omap: added multiplexer state handling - qcom-geni: update frequency configuration - qup: introduce DMA usage policy New hardware support - exynos: add support for Samsung exynos7870 - k1: add support for spacemit k1 (new driver) - imx: add support for i.mx94 lpi2c - rk3x: add support for rk3562 Multiplexers - ltc4306, reg: fix assignment in platform_driver structure ---------------------------------------------------------------- Andi Shyti (1): i2c: k1: Initialize variable before use Andy Shevchenko (11): i2c: Introduce i2c_10bit_addr_*_from_msg() helpers i2c: axxia: Use i2c_10bit_addr_*_from_msg() helpers i2c: bcm-kona: Use i2c_10bit_addr_*_from_msg() helpers i2c: brcmstb: Use i2c_10bit_addr_*_from_msg() helpers i2c: eg20t: Use i2c_10bit_addr_*_from_msg() helpers i2c: kempld: Use i2c_10bit_addr_*_from_msg() helpers i2c: mt7621: Use i2c_10bit_addr_*_from_msg() helpers i2c: rzv2m: Use i2c_10bit_addr_*_from_msg() helpers i2c: ibm_iic: Use i2c_*bit_addr*_from_msg() helpers i2c: mv64xxx: Use i2c_*bit_addr*_from_msg() helpers i2c: mlxbf: Use readl_poll_timeout_atomic() for polling Anindya Sundar Gayen (1): i2c: i2c-exynos5: fixed a spelling error Arnd Bergmann (1): i2c: mux: remove incorrect of_match_ptr annotations Aryan Srivastava (3): i2c: octeon: refactor common i2c operations i2c: octeon: fix return commenting i2c: octeon: remove 10-bit addressing support Frank Li (1): dt-bindings: i2c: imx-lpi2c: add i.MX94 LPI2C Heiner Kallweit (5): i2c: i801: Cosmetic improvements i2c: i801: Move i801_wait_intr and i801_wait_byte_done in the code i2c: i801: Improve too small kill wait time in i801_check_post i2c: i801: Switch to iomapped register access i2c: i801: Use MMIO if available Jayesh Choudhary (2): dt-bindings: i2c: omap: Add mux-states property i2c: omap: Add support for setting mux Kaustabh Chakraborty (2): dt-bindings: i2c: samsung,s3c2410: add exynos7870-i2c compatible dt-bindings: i2c: exynos5: add exynos7870-hsi2c compatible Kever Yang (1): dt-bindings: i2c: i2c-rk3x: Add rk3562 support Manikanta Guntupalli (1): i2c: cadence: Move reset_control_assert after pm_runtime_set_suspended in probe error path Michal Simek (1): i2c: cadence: Simplify using devm_clk_get_enabled() Mukesh Kumar Savaliya (1): i2c: qcom-geni: Update i2c frequency table to match hardware guidance Shyam Sundar S K (4): i2c: amd: Switch to guard(mutex) i2c: dw: Update the master_xfer callback name i2c: amd-asf: Modify callbacks of i2c_algorithm to align with the latest revision i2c: amd-asf: Set cmd variable when encountering an error Stephan Gerhold (3): dt-bindings: i2c: qcom,i2c-qup: Document power-domains dt-bindings: i2c: qup: Document interconnects i2c: qup: Vote for interconnect bandwidth to DRAM Sven Peter (1): i2c: pasemi: Add registers bits and switch to BIT() Troy Mitchell (2): dt-bindings: i2c: spacemit: add support for K1 SoC i2c: spacemit: add support for SpacemiT K1 SoC Vitalii Mordan (1): i2c: pxa: fix call balance of i2c->clk handling routines Wentao Liang (1): i2c: iproc: Refactor prototype and remove redundant error checks Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml | 1 + Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml | 1 + Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml | 1 + Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml | 14 + Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml | 1 + Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml | 61 ++++ Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml | 6 + drivers/i2c/busses/Kconfig | 18 ++ drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-amd-asf-plat.c | 8 +- drivers/i2c/busses/i2c-axxia.c | 21 +- drivers/i2c/busses/i2c-bcm-iproc.c | 13 +- drivers/i2c/busses/i2c-bcm-kona.c | 6 +- drivers/i2c/busses/i2c-brcmstb.c | 11 +- drivers/i2c/busses/i2c-cadence.c | 19 +- drivers/i2c/busses/i2c-designware-amdpsp.c | 26 +- drivers/i2c/busses/i2c-designware-master.c | 2 +- drivers/i2c/busses/i2c-eg20t.c | 28 +- drivers/i2c/busses/i2c-exynos5.c | 2 +- drivers/i2c/busses/i2c-i801.c | 271 +++++++++-------- drivers/i2c/busses/i2c-ibm_iic.c | 14 +- drivers/i2c/busses/i2c-k1.c | 602 ++++++++++++++++++++++++++++++++++++++ drivers/i2c/busses/i2c-kempld.c | 10 +- drivers/i2c/busses/i2c-mlxbf.c | 106 ++----- drivers/i2c/busses/i2c-mt7621.c | 20 +- drivers/i2c/busses/i2c-mv64xxx.c | 12 +- drivers/i2c/busses/i2c-octeon-core.c | 111 ++++--- drivers/i2c/busses/i2c-omap.c | 22 ++ drivers/i2c/busses/i2c-pasemi-core.c | 40 ++- drivers/i2c/busses/i2c-pxa.c | 5 +- drivers/i2c/busses/i2c-qcom-geni.c | 6 +- drivers/i2c/busses/i2c-qup.c | 36 +++ drivers/i2c/busses/i2c-rzv2m.c | 15 +- drivers/i2c/muxes/i2c-mux-ltc4306.c | 2 +- drivers/i2c/muxes/i2c-mux-reg.c | 2 +- include/linux/i2c.h | 15 + 36 files changed, 1090 insertions(+), 439 deletions(-) create mode 100644 Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml create mode 100644 drivers/i2c/busses/i2c-k1.c