| Message ID | 20250324-sdm845-fixes-fastboot-v1-4-d177a10f336d@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | Qualcomm: fix sdm845 clocks and enable fastboot | expand |
On 24/03/2025 19:17, Caleb Connolly wrote: > Enable fastboot support over USB, using MMC as the backend. This will be > the internal eMMC on devices that have it, or the sdcard slot on devices > with UFS (if available). > > We don't use a fixed address for the fastboot buffer because it's > allocated at runtime per-board. Entering fastboot mode should be done by > executing "run fastboot" or manually running: > > fastboot -l $fastboot_addr_r usb 0 > > Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> > --- > configs/qcom_defconfig | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig > index ba4d38d100e053e3708ee2623bf3530787b6b94f..f5c005d9c4093e4902b05213ab2f54c8ca70208a 100644 > --- a/configs/qcom_defconfig > +++ b/configs/qcom_defconfig > @@ -61,8 +61,13 @@ CONFIG_CLK_QCOM_SC7280=y > CONFIG_CLK_QCOM_X1E80100=y > CONFIG_DFU_MMC=y > CONFIG_DFU_SCSI=y > CONFIG_SYS_DFU_DATA_BUF_SIZE=0x200000 > +CONFIG_USB_FUNCTION_FASTBOOT=y > +CONFIG_FASTBOOT_BUF_ADDR=0x0 > +CONFIG_FASTBOOT_FLASH=y > +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 > +CONFIG_FASTBOOT_MMC_USER_SUPPORT=y > CONFIG_MSM_GPIO=y > CONFIG_QCOM_PMIC_GPIO=y > CONFIG_DM_I2C=y > CONFIG_SYS_I2C_QUP=y > Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig index ba4d38d100e053e3708ee2623bf3530787b6b94f..f5c005d9c4093e4902b05213ab2f54c8ca70208a 100644 --- a/configs/qcom_defconfig +++ b/configs/qcom_defconfig @@ -61,8 +61,13 @@ CONFIG_CLK_QCOM_SC7280=y CONFIG_CLK_QCOM_X1E80100=y CONFIG_DFU_MMC=y CONFIG_DFU_SCSI=y CONFIG_SYS_DFU_DATA_BUF_SIZE=0x200000 +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_BUF_ADDR=0x0 +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +CONFIG_FASTBOOT_MMC_USER_SUPPORT=y CONFIG_MSM_GPIO=y CONFIG_QCOM_PMIC_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_QUP=y
Enable fastboot support over USB, using MMC as the backend. This will be the internal eMMC on devices that have it, or the sdcard slot on devices with UFS (if available). We don't use a fixed address for the fastboot buffer because it's allocated at runtime per-board. Entering fastboot mode should be done by executing "run fastboot" or manually running: fastboot -l $fastboot_addr_r usb 0 Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> --- configs/qcom_defconfig | 5 +++++ 1 file changed, 5 insertions(+)