diff mbox series

[2/5] powerpc: 83xx/gpio: use new line value setter callbacks

Message ID 20250408-gpiochip-set-rv-powerpc-v1-2-73dc1ebc6ef1@linaro.org
State New
Headers show
Series powerpc: convert board-file GPIO chips to using new value setters | expand

Commit Message

Bartosz Golaszewski April 8, 2025, 7:21 a.m. UTC 
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
index 4d8fa9ed1a67..d4ba6dbb86b2 100644
--- a/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
+++ b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
@@ -92,7 +92,7 @@  static void mcu_power_off(void)
 	mutex_unlock(&mcu->lock);
 }
 
-static void mcu_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+static int mcu_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
 {
 	struct mcu *mcu = gpiochip_get_data(gc);
 	u8 bit = 1 << (4 + gpio);
@@ -105,6 +105,8 @@  static void mcu_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
 
 	i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL, mcu->reg_ctrl);
 	mutex_unlock(&mcu->lock);
+
+	return 0;
 }
 
 static int mcu_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
@@ -123,7 +125,7 @@  static int mcu_gpiochip_add(struct mcu *mcu)
 	gc->can_sleep = 1;
 	gc->ngpio = MCU_NUM_GPIO;
 	gc->base = -1;
-	gc->set = mcu_gpio_set;
+	gc->set_rv = mcu_gpio_set;
 	gc->direction_output = mcu_gpio_dir_out;
 	gc->parent = dev;