diff mbox series

[v4,01/32] dt-bindings: mfd: samsung,s2mps11: add s2mpg10

Message ID 20250409-s2mpg10-v4-1-d66d5f39b6bf@linaro.org
State New
Headers show
Series Samsung S2MPG10 PMIC MFD-based drivers | expand

Commit Message

André Draszik April 9, 2025, 8:37 p.m. UTC 
The Samsung S2MPG10 PMIC is similar to the existing PMICs supported by
this binding.

It is a Power Management IC for mobile applications with buck
converters, various LDOs, power meters, RTC, clock outputs, and
additional GPIOs interfaces.

Unlike other Samsung PMICs, communication is not via I2C, but via the
Samsung ACPM firmware, it therefore doesn't need a 'reg' property but
needs to be a child of the ACPM firmware node instead.

S2MPG10 can also act as a system power controller allowing
implementation of a true cold-reset of the system.

Support for the other components like regulators and power meters will
be added in subsequent future patches.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
v3:
* keep 'regulators' subnode required even for s2mpg10 (Krzysztof)

v2:
* drop ACPM phandle 'exynos,acpm-ipc', and expect this to be a child
  node of ACPM directly instead
* allow, but still don't enforce, regulators subnode, to ease adding it
  in the future
* deny 'reg' property, it's incorrect to optionally have it for S2MPG10
* enforce 'interrupts' or 'interrupts-extended' property. S2MPG10 can
  not work without. Note this is done as-is using the oneOf, because
  dtschema's fixups.py doesn't handle this nesting itself
---
 .../devicetree/bindings/mfd/samsung,s2mps11.yaml   | 26 +++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
index ac5d0c149796b6a4034b5d4245bfa8be0433cfab..d6b9e29147965b6d8eef786b0fb5b5f198ab69ab 100644
--- a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
+++ b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
@@ -20,6 +20,7 @@  description: |
 properties:
   compatible:
     enum:
+      - samsung,s2mpg10-pmic
       - samsung,s2mps11-pmic
       - samsung,s2mps13-pmic
       - samsung,s2mps14-pmic
@@ -58,16 +59,39 @@  properties:
       reset (setting buck voltages to default values).
     type: boolean
 
+  system-power-controller: true
+
   wakeup-source: true
 
 required:
   - compatible
-  - reg
   - regulators
 
 additionalProperties: false
 
 allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s2mpg10-pmic
+    then:
+      properties:
+        reg: false
+        samsung,s2mps11-acokb-ground: false
+        samsung,s2mps11-wrstbi-ground: false
+
+      oneOf:
+        - required: [interrupts]
+        - required: [interrupts-extended]
+
+    else:
+      properties:
+        system-power-controller: false
+
+      required:
+        - reg
+
   - if:
       properties:
         compatible: