diff mbox series

[v4,09/11] drm/bridge: anx7625: fix drm_bridge ops flags to support hot-plugging

Message ID 20250417053909.1051416-10-amakhija@qti.qualcomm.com
State New
Headers show
Series [v4,01/11] dt-bindings: display: msm-dsi-phy-7nm: document the SA8775P DSI PHY | expand

Commit Message

Ayushi Makhija April 17, 2025, 5:39 a.m. UTC 
From: Ayushi Makhija <quic_amakhija@quicinc.com>

The anx7625_link_bridge() checks if a device is not a panel
bridge and add DRM_BRIDGE_OP_HPD and DRM_BRIDGE_OP_DETECT
flags to the drm_bridge->ops. However, on port 1 of the anx7625
bridge, any device added is always treated as a panel bridge,
preventing connector_detect() from being called. To resolve
this, instead of just checking if it is a panel bridge, verify
the type of device based on aux whether it is a DisplayPort or
eDP panel. If the device is not of the eDP type, add
DRM_BRIDGE_OP_HPD and DRM_BRIDGE_OP_DETECT flags to the to
the drm_bridge->ops.

Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
 drivers/gpu/drm/bridge/analogix/anx7625.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
index 99ef3f27ae42..a32ebe1fa0cd 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.c
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -2608,9 +2608,8 @@  static int anx7625_link_bridge(struct drm_dp_aux *aux)
 	platform->bridge.of_node = dev->of_node;
 	if (!anx7625_of_panel_on_aux_bus(dev))
 		platform->bridge.ops |= DRM_BRIDGE_OP_EDID;
-	if (!platform->pdata.panel_bridge)
-		platform->bridge.ops |= DRM_BRIDGE_OP_HPD |
-					DRM_BRIDGE_OP_DETECT;
+	if (!platform->pdata.panel_bridge || !anx7625_of_panel_on_aux_bus(dev))
+		platform->bridge.ops |= DRM_BRIDGE_OP_HPD | DRM_BRIDGE_OP_DETECT;
 	platform->bridge.type = platform->pdata.panel_bridge ?
 				    DRM_MODE_CONNECTOR_eDP :
 				    DRM_MODE_CONNECTOR_DisplayPort;