@@ -833,6 +833,7 @@ config CRYPTO_DEV_CCREE
If unsure say Y.
source "drivers/crypto/hisilicon/Kconfig"
+source "drivers/crypto/loongson/Kconfig"
source "drivers/crypto/amlogic/Kconfig"
@@ -50,3 +50,4 @@ obj-y += hisilicon/
obj-$(CONFIG_CRYPTO_DEV_AMLOGIC_GXL) += amlogic/
obj-y += intel/
obj-y += starfive/
+obj-y += loongson/
new file mode 100644
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+config CRYPTO_DEV_LOONGSON_SE
+ tristate "Loongson Security Engine chip controller driver"
+ depends on LOONGARCH && ACPI
+ select MFD_CORE
+ help
+ The Loongson Security Engine chip supports RNG, SM2, SM3 and
+ SM4 accelerator engines. Each engine have its own DMA buffer
+ provided by the controller. The kernel cannot directly send
+ commands to the engine and must first send them to the controller,
+ which will forward them to the corresponding engine.
new file mode 100644
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_CRYPTO_DEV_LOONGSON_SE) += loongson-se.o
new file mode 100644
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (C) 2025 Loongson Technology Corporation Limited */
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "loongson-se.h"
+
+struct loongson_se {
+ void __iomem *base;
+ spinlock_t dev_lock;
+ struct completion cmd_completion;
+
+ void *dmam_base;
+ int dmam_size;
+
+ struct mutex engine_init_lock;
+ struct loongson_se_engine engines[SE_ENGINE_MAX];
+};
+
+struct loongson_se_controller_cmd {
+ u32 command_id;
+ u32 info[7];
+};
+
+static int loongson_se_poll(struct loongson_se *se, u32 int_bit)
+{
+ u32 status;
+ int err;
+
+ spin_lock_irq(&se->dev_lock);
+
+ /* Notify the controller that the engine needs to be started */
+ writel(int_bit, se->base + SE_L2SINT_SET);
+ /* Polling until the controller has forwarded the engine command */
+ err = readl_relaxed_poll_timeout_atomic(se->base + SE_L2SINT_STAT, status,
+ !(status & int_bit), 1, 10000);
+
+ spin_unlock_irq(&se->dev_lock);
+
+ return err;
+}
+
+static int loongson_se_send_controller_cmd(struct loongson_se *se,
+ struct loongson_se_controller_cmd *cmd)
+{
+ u32 *send_cmd = (u32 *)cmd;
+ int err, i;
+
+ for (i = 0; i < SE_SEND_CMD_REG_LEN; i++)
+ writel(send_cmd[i], se->base + SE_SEND_CMD_REG + i * 4);
+
+ err = loongson_se_poll(se, SE_INT_CONTROLLER);
+ if (err)
+ return err;
+
+ return wait_for_completion_interruptible(&se->cmd_completion);
+}
+
+int loongson_se_send_engine_cmd(struct loongson_se_engine *engine)
+{
+ /* After engine initialization, the controller already knows
+ * where to obtain engine commands from. Now all we need to
+ * do is notify the controller that the engine needs to be started.
+ */
+ int err = loongson_se_poll(engine->se, BIT(engine->id));
+
+ if (err)
+ return err;
+
+ return wait_for_completion_interruptible(&engine->completion);
+}
+EXPORT_SYMBOL_GPL(loongson_se_send_engine_cmd);
+
+struct loongson_se_engine *loongson_se_init_engine(struct device *dev, int id)
+{
+ struct loongson_se *se = dev_get_drvdata(dev);
+ struct loongson_se_engine *engine = &se->engines[id];
+ struct loongson_se_controller_cmd cmd;
+
+ engine->se = se;
+ engine->id = id;
+ init_completion(&engine->completion);
+
+ /* Divide DMA memory equally among all engines */
+ engine->buffer_size = se->dmam_size / SE_ENGINE_MAX;
+ engine->buffer_off = (se->dmam_size / SE_ENGINE_MAX) * id;
+ engine->data_buffer = se->dmam_base + engine->buffer_off;
+
+ /*
+ * There has no engine0, use its data buffer as command buffer for other
+ * engines. The DMA memory size is obtained from the ACPI table, which
+ * ensures that the data buffer size of engine0 is larger than the
+ * command buffer size of all engines.
+ */
+ engine->command = se->dmam_base + id * (2 * SE_ENGINE_CMD_SIZE);
+ engine->command_ret = engine->command + SE_ENGINE_CMD_SIZE;
+
+ mutex_lock(&se->engine_init_lock);
+ /* Tell the controller where to find engine command */
+ cmd.command_id = SE_CMD_SET_ENGINE_CMDBUF;
+ cmd.info[0] = id;
+ cmd.info[1] = engine->command - se->dmam_base;
+ cmd.info[2] = 2 * SE_ENGINE_CMD_SIZE;
+ if (loongson_se_send_controller_cmd(se, &cmd))
+ engine = NULL;
+ mutex_unlock(&se->engine_init_lock);
+
+ return engine;
+}
+EXPORT_SYMBOL_GPL(loongson_se_init_engine);
+
+static irqreturn_t se_irq_handler(int irq, void *dev_id)
+{
+ struct loongson_se_engine *engine;
+ struct loongson_se *se = dev_id;
+ u32 int_status;
+ int id;
+
+ spin_lock(&se->dev_lock);
+
+ int_status = readl(se->base + SE_S2LINT_STAT);
+ /* For controller */
+ if (int_status & SE_INT_CONTROLLER) {
+ complete(&se->cmd_completion);
+ int_status &= ~SE_INT_CONTROLLER;
+ writel(SE_INT_CONTROLLER, se->base + SE_S2LINT_CL);
+ }
+ /* For engines */
+ while (int_status) {
+ id = __ffs(int_status);
+
+ engine = &se->engines[id];
+ complete(&engine->completion);
+ int_status &= ~BIT(id);
+ writel(BIT(id), se->base + SE_S2LINT_CL);
+ }
+
+ spin_unlock(&se->dev_lock);
+
+ return IRQ_HANDLED;
+}
+
+static int loongson_se_init(struct loongson_se *se, dma_addr_t addr, int size)
+{
+ struct loongson_se_controller_cmd cmd;
+ int err;
+
+ cmd.command_id = SE_CMD_START;
+ err = loongson_se_send_controller_cmd(se, &cmd);
+ if (err)
+ return err;
+
+ cmd.command_id = SE_CMD_SET_DMA;
+ cmd.info[0] = lower_32_bits(addr);
+ cmd.info[1] = upper_32_bits(addr);
+ cmd.info[2] = size;
+
+ return loongson_se_send_controller_cmd(se, &cmd);
+}
+
+static const struct mfd_cell engines[] = {
+ { .name = "loongson-rng" },
+ { .name = "loongson-tpm" },
+};
+
+static int loongson_se_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct loongson_se *se;
+ int nr_irq, irq, err;
+ dma_addr_t paddr;
+
+ se = devm_kmalloc(dev, sizeof(*se), GFP_KERNEL);
+ if (!se)
+ return -ENOMEM;
+ dev_set_drvdata(dev, se);
+ init_completion(&se->cmd_completion);
+ spin_lock_init(&se->dev_lock);
+ mutex_init(&se->engine_init_lock);
+
+ dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
+ if (device_property_read_u32(dev, "dmam_size", &se->dmam_size))
+ return -ENODEV;
+ se->dmam_base = dmam_alloc_coherent(dev, se->dmam_size, &paddr, GFP_KERNEL);
+ if (!se->dmam_base)
+ return -ENOMEM;
+
+ se->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(se->base))
+ return PTR_ERR(se->base);
+ writel(SE_INT_ALL, se->base + SE_S2LINT_EN);
+
+ nr_irq = platform_irq_count(pdev);
+ if (nr_irq <= 0)
+ return -ENODEV;
+ while (nr_irq) {
+ irq = platform_get_irq(pdev, --nr_irq);
+ err = devm_request_irq(dev, irq, se_irq_handler, 0, "loongson-se", se);
+ if (err)
+ dev_err(dev, "failed to request irq: %d\n", irq);
+ }
+
+ err = loongson_se_init(se, paddr, se->dmam_size);
+ if (err)
+ return err;
+
+ return devm_mfd_add_devices(dev, 0, engines, ARRAY_SIZE(engines), NULL, 0, NULL);
+}
+
+static const struct acpi_device_id loongson_se_acpi_match[] = {
+ {"LOON0011", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(acpi, loongson_se_acpi_match);
+
+static struct platform_driver loongson_se_driver = {
+ .probe = loongson_se_probe,
+ .driver = {
+ .name = "loongson-se",
+ .acpi_match_table = loongson_se_acpi_match,
+ },
+};
+module_platform_driver(loongson_se_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Yinggang Gu <guyinggang@loongson.cn>");
+MODULE_AUTHOR("Qunqin Zhao <zhaoqunqin@loongson.cn>");
+MODULE_DESCRIPTION("Loongson Security Module driver");
new file mode 100644
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Copyright (C) 2025 Loongson Technology Corporation Limited */
+
+#ifndef __LOONGSON_SE_H__
+#define __LOONGSON_SE_H__
+
+#define SE_SEND_CMD_REG 0x0
+#define SE_SEND_CMD_REG_LEN 0x8
+/* controller command id */
+#define SE_CMD_START 0x0
+#define SE_CMD_SET_DMA 0x3
+#define SE_CMD_SET_ENGINE_CMDBUF 0x4
+
+#define SE_S2LINT_STAT 0x88
+#define SE_S2LINT_EN 0x8c
+#define SE_S2LINT_CL 0x94
+#define SE_L2SINT_STAT 0x98
+#define SE_L2SINT_SET 0xa0
+
+#define SE_INT_ALL 0xffffffff
+#define SE_INT_CONTROLLER BIT(0)
+
+#define SE_ENGINE_MAX 16
+#define SE_ENGINE_RNG 1
+#define SE_CMD_RNG 0x100
+
+#define SE_ENGINE_TPM 5
+#define SE_CMD_TPM 0x500
+
+#define SE_ENGINE_CMD_SIZE 32
+
+struct loongson_se_engine {
+ struct loongson_se *se;
+ int id;
+
+ /* Command buffer */
+ void *command;
+ void *command_ret;
+
+ void *data_buffer;
+ uint buffer_size;
+ /* Data buffer offset to DMA base */
+ uint buffer_off;
+
+ struct completion completion;
+
+};
+
+struct loongson_se_engine *loongson_se_init_engine(struct device *dev, int id);
+int loongson_se_send_engine_cmd(struct loongson_se_engine *engine);
+
+#endif