@@ -369,13 +369,11 @@ struct vub300_mmc_host {
static void vub300_delete(struct kref *kref)
{ /* kref callback - softirq */
struct vub300_mmc_host *vub300 = kref_to_vub300_mmc_host(kref);
- struct mmc_host *mmc = vub300->mmc;
usb_free_urb(vub300->command_out_urb);
vub300->command_out_urb = NULL;
usb_free_urb(vub300->command_res_urb);
vub300->command_res_urb = NULL;
usb_put_dev(vub300->udev);
- mmc_free_host(mmc);
/*
* and hence also frees vub300
* which is contained at the end of struct mmc
@@ -2114,7 +2112,7 @@ static int vub300_probe(struct usb_interface *interface,
goto error1;
}
/* this also allocates memory for our VUB300 mmc host device */
- mmc = mmc_alloc_host(sizeof(struct vub300_mmc_host), &udev->dev);
+ mmc = devm_mmc_alloc_host(&udev->dev, sizeof(*vub300));
if (!mmc) {
retval = -ENOMEM;
dev_err(&udev->dev, "not enough memory for the mmc_host\n");
@@ -2271,7 +2269,7 @@ static int vub300_probe(struct usb_interface *interface,
dev_err(&vub300->udev->dev,
"Could not find two sets of bulk-in/out endpoint pairs\n");
retval = -EINVAL;
- goto error5;
+ goto error4;
}
retval =
usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
@@ -2280,14 +2278,14 @@ static int vub300_probe(struct usb_interface *interface,
0x0000, 0x0000, &vub300->hc_info,
sizeof(vub300->hc_info), 1000);
if (retval < 0)
- goto error5;
+ goto error4;
retval =
usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
SET_ROM_WAIT_STATES,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
firmware_rom_wait_states, 0x0000, NULL, 0, 1000);
if (retval < 0)
- goto error5;
+ goto error4;
dev_info(&vub300->udev->dev,
"operating_mode = %s %s %d MHz %s %d byte USB packets\n",
(mmc->caps & MMC_CAP_SDIO_IRQ) ? "IRQs" : "POLL",
@@ -2302,7 +2300,7 @@ static int vub300_probe(struct usb_interface *interface,
0x0000, 0x0000, &vub300->system_port_status,
sizeof(vub300->system_port_status), 1000);
if (retval < 0) {
- goto error5;
+ goto error4;
} else if (sizeof(vub300->system_port_status) == retval) {
vub300->card_present =
(0x0001 & vub300->system_port_status.port_flags) ? 1 : 0;
@@ -2310,7 +2308,7 @@ static int vub300_probe(struct usb_interface *interface,
(0x0010 & vub300->system_port_status.port_flags) ? 1 : 0;
} else {
retval = -EINVAL;
- goto error5;
+ goto error4;
}
usb_set_intfdata(interface, vub300);
INIT_DELAYED_WORK(&vub300->pollwork, vub300_pollwork_thread);
@@ -2340,8 +2338,6 @@ static int vub300_probe(struct usb_interface *interface,
return 0;
error6:
timer_delete_sync(&vub300->inactivity_timer);
-error5:
- mmc_free_host(mmc);
/*
* and hence also frees vub300
* which is contained at the end of struct mmc
Use new function devm_mmc_alloc_host() to simplify the code. Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> --- drivers/mmc/host/vub300.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-)