diff mbox series

[v2,09/14] spi: spi-fsl-dspi: Use DMA for S32G controller in target mode

Message ID 20250522-james-nxp-spi-v2-9-bea884630cfb@linaro.org
State New
Headers show
Series spi: spi-fsl-dspi: DSPI support for NXP S32G platforms | expand

Commit Message

James Clark May 22, 2025, 2:51 p.m. UTC 
From: Larisa Grigore <larisa.grigore@nxp.com>

Switch to DMA for target mode otherwise the controller is too slow to
feed TX FIFO and UNDERFLOW occurs frequently. DMA can work only with 8
and 16 bits per word. 32bits per word is not supported, this is a
hardware limitation, so we keep the controller mode in TCFQ mode.

Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
---
 drivers/spi/spi-fsl-dspi.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)
diff mbox series

Patch

diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 24a51267cb4d..db5a2ed66f68 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -139,6 +139,7 @@  enum {
 	MCF5441X,
 	VF610,
 	S32G,
+	S32G_TARGET,
 };
 
 static const struct regmap_range dspi_yes_ranges[] = {
@@ -183,6 +184,7 @@  static const struct regmap_access_table dspi_volatile_table = {
 
 enum {
 	DSPI_REGMAP,
+	S32G_DSPI_REGMAP,
 	DSPI_XSPI_REGMAP,
 	S32G_DSPI_XSPI_REGMAP,
 	DSPI_PUSHR,
@@ -198,6 +200,15 @@  static const struct regmap_config dspi_regmap_config[] = {
 		.rd_table	= &dspi_access_table,
 		.wr_table	= &dspi_access_table,
 	},
+	[S32G_DSPI_REGMAP] = {
+		.reg_bits	= 32,
+		.val_bits	= 32,
+		.reg_stride	= 4,
+		.max_register	= SPI_RXFR4,
+		.volatile_table	= &dspi_volatile_table,
+		.wr_table	= &s32g_dspi_access_table,
+		.rd_table	= &s32g_dspi_access_table,
+	},
 	[DSPI_XSPI_REGMAP] = {
 		.reg_bits	= 32,
 		.val_bits	= 32,
@@ -296,6 +307,12 @@  static const struct fsl_dspi_devtype_data devtype_data[] = {
 		.fifo_size	  = 5,
 		.regmap		  = &dspi_regmap_config[S32G_DSPI_XSPI_REGMAP],
 	},
+	[S32G_TARGET] = {
+		.trans_mode	  = DSPI_DMA_MODE,
+		.max_clock_factor = 1,
+		.fifo_size	  = 5,
+		.regmap		  = &dspi_regmap_config[S32G_DSPI_REGMAP],
+	},
 };
 
 struct fsl_dspi_dma {
@@ -351,6 +368,12 @@  struct fsl_dspi {
 	void (*dev_to_host)(struct fsl_dspi *dspi, u32 rxdata);
 };
 
+static bool is_s32g_dspi(struct fsl_dspi *data)
+{
+	return data->devtype_data == &devtype_data[S32G] ||
+	       data->devtype_data == &devtype_data[S32G_TARGET];
+}
+
 static void dspi_native_host_to_dev(struct fsl_dspi *dspi, u32 *txdata)
 {
 	switch (dspi->oper_word_size) {
@@ -1426,6 +1449,9 @@  static int dspi_probe(struct platform_device *pdev)
 		dspi->pushr_tx = 0;
 	}
 
+	if (spi_controller_is_target(ctlr) && is_s32g_dspi(dspi))
+		dspi->devtype_data = &devtype_data[S32G_TARGET];
+
 	if (dspi->devtype_data->trans_mode == DSPI_XSPI_MODE)
 		ctlr->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
 	else