diff mbox series

[v3,3/3] arm64: dts: qcom: sm8750-qrd: Add sound (speakers, headset codec, dmics)

Message ID 20250526-sm8750-audio-part-2-v3-3-74429c686bb1@linaro.org
State New
Headers show
Series arm64: dts: qcom: sm8750: Add sound | expand

Commit Message

Krzysztof Kozlowski May 26, 2025, 11:46 a.m. UTC
Add device nodes for most of the sound support - WSA884x smart speakers,
WCD9395 audio codec (headset) and sound card - which allows sound
playback via speakers and recording via AMIC microphones.  Changes bring
necessary foundation for headset playback/recording via USB, but that
part is not yet ready.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes in v3:
1. New patch
---
 arch/arm64/boot/dts/qcom/sm8750-qrd.dts | 225 ++++++++++++++++++++++++++++++++
 1 file changed, 225 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
index 840a6d8f8a24670a01376f8fce511da222159016..87e983a5c0e9b82487196adc3b50cc314b6ed0e6 100644
--- a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
@@ -28,6 +28,37 @@  aliases {
 		serial0 = &uart7;
 	};
 
+	wcd939x: audio-codec {
+		compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+		/*
+		 * Mismatch with schematics - downstream DTS has L15B at 1.8 V,
+		 * schematics L2I at 1.2 V
+		 */
+		vdd-px-supply = <&vreg_l15b_1p8>;
+
+		#sound-dai-cells = <1>;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -80,6 +111,88 @@  key-volume-up {
 		};
 	};
 
+	sound {
+		compatible = "qcom,sm8750-sndcard", "qcom,sm8450-sndcard";
+		model = "SM8750-QRD";
+		audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC1", "MIC BIAS1",
+				"AMIC2", "MIC BIAS2",
+				"AMIC3", "MIC BIAS3",
+				"AMIC4", "MIC BIAS3",
+				"AMIC5", "MIC BIAS4",
+				"TX SWR_INPUT0", "ADC1_OUTPUT",
+				"TX SWR_INPUT1", "ADC2_OUTPUT",
+				"TX SWR_INPUT2", "ADC3_OUTPUT",
+				"TX SWR_INPUT3", "ADC4_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			codec {
+				sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			codec {
+				sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			codec {
+				sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 
@@ -803,9 +916,121 @@  &remoteproc_mpss {
 	status = "okay";
 };
 
+&swr0 {
+	status = "okay";
+
+	/* WSA8845, Speaker North */
+	north_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		pinctrl-0 = <&spkr_0_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&tlmm 76 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l2i_1p2>;
+
+		/*
+		 * WSA8845 Port 1 (DAC)     <=> SWR0 Port 1 (SPKR_L)
+		 * WSA8845 Port 2 (COMP)    <=> SWR0 Port 2 (SPKR_L_COMP)
+		 * WSA8845 Port 3 (BOOST)   <=> SWR0 Port 3 (SPKR_L_BOOST)
+		 * WSA8845 Port 4 (PBR)     <=> SWR0 Port 7 (PBR)
+		 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI)
+		 * WSA8845 Port 6 (CPS)     <=> SWR0 Port 13 (CPS)
+		 */
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Speaker South */
+	south_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l2i_1p2>;
+
+		/*
+		 * WSA8845 Port 1 (DAC)     <=> SWR0 Port 4 (SPKR_R)
+		 * WSA8845 Port 2 (COMP)    <=> SWR0 Port 5 (SPKR_R_COMP)
+		 * WSA8845 Port 3 (BOOST)   <=> SWR0 Port 6 (SPKR_R_BOOST)
+		 * WSA8845 Port 4 (PBR)     <=> SWR0 Port 7 (PBR)
+		 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI)
+		 * WSA8845 Port 6 (CPS)     <=> SWR0 Port 13 (CPS)
+		 */
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9395 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010e00";
+		reg = <0 4>;
+
+		/*
+		 * WCD9395 RX Port 1 (HPH_L/R)      <=> SWR1 Port 1 (HPH_L/R)
+		 * WCD9395 RX Port 2 (CLSH)         <=> SWR1 Port 2 (CLSH)
+		 * WCD9395 RX Port 3 (COMP_L/R)     <=> SWR1 Port 3 (COMP_L/R)
+		 * WCD9395 RX Port 4 (LO)           <=> SWR1 Port 4 (LO)
+		 * WCD9395 RX Port 5 (DSD_L/R)      <=> SWR1 Port 5 (DSD_L/R)
+		 * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R)
+		 */
+		qcom,rx-port-mapping = <1 2 3 4 5 9>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9395 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010e00";
+		reg = <0 3>;
+
+		/*
+		 * WCD9395 TX Port 1 (ADC1,2,3,4)         <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
+		 * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1)   <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
+		 * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7)
+		 * WCD9395 TX Port 4 (DMIC4,5,6,7)        <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11)
+		 */
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
 &tlmm {
 	/* reserved for secure world */
 	gpio-reserved-ranges = <36 4>, <74 1>;
+
+	spkr_0_sd_n_active: spkr-0-sd-n-active-state {
+		pins = "gpio76";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio77";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio101";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
 };
 
 &uart7 {