diff mbox series

[4/5] arm64: dts: qcom: ipq5018: add MDIO buses

Message ID 20250525-ipq5018-ge-phy-v1-4-ddab8854e253@outlook.com
State New
Headers show
Series Add support for the IPQ5018 Internal GE PHY | expand

Commit Message

George Moussalem via B4 Relay May 25, 2025, 5:56 p.m. UTC 
From: George Moussalem <george.moussalem@outlook.com>

IPQ5018 contains two mdio buses of which one bus is used to control the
SoC's internal GE PHY, while the other bus is connected to external PHYs
or switches.

There's already support for IPQ5018 in the mdio-ipq4019 driver, so let's
simply add the mdio nodes for them.

Signed-off-by: George Moussalem <george.moussalem@outlook.com>
---
 arch/arm64/boot/dts/qcom/ipq5018.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 130360014c5e14c778e348d37e601f60325b0b14..03ebc3e305b267c98a034c41ce47a39269afce75 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -182,6 +182,30 @@  pcie0_phy: phy@86000 {
 			status = "disabled";
 		};
 
+		mdio0: mdio@88000 {
+			compatible = "qcom,ipq5018-mdio";
+			reg = <0x00088000 0x64>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clocks = <&gcc GCC_MDIO0_AHB_CLK>;
+			clock-names = "gcc_mdio_ahb_clk";
+
+			status = "disabled";
+		};
+
+		mdio1: mdio@90000 {
+			compatible = "qcom,ipq5018-mdio";
+			reg = <0x00090000 0x64>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clocks = <&gcc GCC_MDIO1_AHB_CLK>;
+			clock-names = "gcc_mdio_ahb_clk";
+
+			status = "disabled";
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq5018-tlmm";
 			reg = <0x01000000 0x300000>;